The effect of the densification process on dowel tensile performance with different types of glues
By:
References
- Adlam, R. 2005. Thermomechanical Densification of Timber: Initial Investigations of the Potential of Softwood Timber. Forest and Wood Products Research and Development Corporation, Australia.
- Ahmed, S.A., Moren, T., Hagman, O., Cloutier, A., Fang, C.H., Elustondo, D. 2013. Anatomical properties and process parameters affecting blister/blow formation in densified European aspen and downy birch sapwood boards by thermo-hygro-mechanical compression. Journal of Materials Science, 48, 8571–8579. DOI: https://doi.org/10.1007/s10853-013-7679-9
- Altınok, M. 1998. Effects on the adhesion resistance of wooden surfaces treated in woodworking basic machines. Polytechnic Magazine, 1 (2), 17–20.
- ASTM A1035. 2021. Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement. ASTM.
- Atar, M., Özçiftçi, A. 1999. Effects of bleaching chemicals on the adhesion strength of PVAc glue in wood material. Turkish Journal of Forestry, 11 (1), 15–45.
- Atılgan A. 2019. The effect of thermo-mechanical concentrated wood material on adhesion resistance in varnishes. Undergraduate thesis, Gazi University, Ersin Ercan, Kadir Aydin, Cansu Özder, Musa Atar Faculty of Technology, Department of Wood Industry Engineering, Ankara, Turkey.
- Blomberg, J. 2006. Mechanical and physical properties of semi-isostatically densified wood. Doctoral thesis, Lulea University of Technology, Division of Wood Technology, Sweden.
- Eckelman, C.A. 1979. Withdrawal strength of dowel joints: effect of shear strength. Forest Product Journal, 29 (1), 48–52.
- Imirzi, Ö., Ülker, O., Burdurlu, E. 2014. Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.). BioResources, 9 (1), 191–209.
- Karaman, A., Yıldırım, M.N., Uslu, E. 2019. Effect of dowel wood species on dowel tensile strength in wooden length joints bonded with different adhesives. Turkish Journal of Forestry, 20 (4), 427–432. DOI: 10.18182/tjf.591404
- Kasal, A. 2007. Determination of dowel holding performance of wood materials. Journal of Engineering and Architecture Faculty, 3, 387–397.
- Kasal, A., Tolga, K., Smardzewski, J. 2020. Experimental and numerical study on withdrawal strength of different types of auxetic dowels for furniture joints. Materials, 13 (19), 4252.
- Keskin, H., Atar, M., Akyildiz, M.H. Bonding strengths of polyvinyl acetate, Desmodur-VTKA, phenolformaldehyde and urea-formaldehyde adhesives in wood materials impregnated with Vacsol Azure. Materials and Design, 30 (9), 3789–3794. DOI: https://doi.org/10.1016/j.matdes.2009.01.032
- Kloiber, M., Tippner, J., Hrivnák, J. 2014. Mechanical properties of wood examined by semi-destructive devices. Materials and Structures, 47, 199–212. DOI: https://doi.org/10.1617/s11527-013-0055-z
- Korkut, S.D., Hiziroğlu, S., Aytin, A. 2013. Effect of heat treatment on surface characteristics wild cherry wood. BioResources, 8 (2), 1582–1590.
- Kutnar, A., Kamke, F.A., Sernek, M. 2008. The mechanical properties of densified VTC wood relevant for structural composites. Holz als Roh-und Werkstoff, 66 (6), 439–446.
- Küdela, J., Resetka, M. 2011. Influence of high pressing temperature on dimensional stability of beech wood. Forestry and Wood Technology, 75, 19–25.
- Laine, K. et al. 2016. Wood densification and thermal modification: hardness, set recovery and micro-morphology. Wood Science and Technology, 50, 883–894. DOI: https://doi.org/10.1007/s00226-016-0835-z
- Li, L., Gong, M., Yuan, N., Li, D. 2013. An Optimal thermo-hydro-mechanical densification (THM) process for densifying balsam fir wood. BioResources, 8 (3), 3967–3981.
- Navi, P., Girardet, F. 2000. Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung, 54 (3), 287–293.
- Parham, R.A., Gray, R.L. 1984. Formation and structure of wood. In: The Chemistry of Solid Wood (ed. R. Rowell). American Chemical Society, 13–56. DOI: 10.1021/ba-1984-0207.ch
- Pelit, H. 2014. The effects of densification and heat treatment on finishing process with some technological properties of Eastern beech and scots pine. PhD thesis, Gazi University, Ankara, Turkey.
- Rautkari, L., Properzi, M., Pichelin, F., Hughes, M. 2009. Surface modification of wood using friction. Wood Science and Technology, 43, 291–299.
- Santos, C.M.T. dos., Menezzi, C.H.S. Del., Souza, M.R. de. 2012. Properties of thermo-mechanically treated wood from Pinus caribaea var. Hondurensis. BioResources, 7 (2), 1850–1865.
- Tabarsa, T., Chui, Y.H. 1997. Effects of hot-pressing on properties of white spruce. Forest Products Journal, 47, 71–76.
- TS 2475. 1976. Odunda liflere paralel doğrultuda çekme gerilmesinin tayini. T.S.E., Ankara.
- TS ISO 3129. 2021. Odun – Küçük kusursuz odun numunelerinin mekanik ve fiziksel muayenesi için genel gerekler ve numune alma yöntemleri. T.S.E., Ankara.
- Ulker, O., Aslanova, F., Hiziroglu, S. 2018. Properties of thermally treated yellow poplar, southern pine, and eastern redcedar. BioResources, 13 (4), 7726–7737.
- Ulker, O., Burdurlu, E. 2016. Some mechanical properties of densified and laminated lombardy poplar (Populus nigra L.). Wood Research, 61 (6), 959–970.
- Ulker, O., Hiziroglu, S. 2017. Some properties of densified eastern redcedar as function of heat and pressure. Materials, 10 (11), 1275. DOI: https://doi.org/10.3390/ma10111275
- Ulker, O., İmirzi, Ö., Burdurlu, E. 2012. The effect of densification temperature on some physical and mechanical properties of Scots pine (Pinus sylvestris L.). BioResources, 7 (4), 5581–5592.
- Ulker, O., İmirzi, Ö., Burdurlu, E. 2014. Effect of densification temperature and some surfacing techniques on the surface roughness of densified Scots pine (Pinus sylvestris L.). BioResources, 9 (1), 191–209.
Language: English
Page range: 214 - 225
Submitted on: Jan 27, 2022
Accepted on: Mar 10, 2022
Published on: Dec 10, 2022
Published by: Forest Research Institute
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2022 Ersin Ercan, Kadir Aydin, Cansu Özder, Musa Atar, published by Forest Research Institute
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.