An Integration of Neural Network and Shuffled Frog-Leaping Algorithm for CNC Machining Monitoring

Alireza Goli; Erfan Babaee Tirkolaee; Gerhard-Wilhelm Weber

doi:10.2478/fcds-2021-0003

Abstract

This paper addresses Acoustic Emission (AE) from Computer Numerical Control (CNC) machining operations. Experimental measurements are performed on the CNC lathe sensors to provide the power consumption data. To this end, a hybrid methodology based on the integration of an Artificial Neural Network (ANN) and a Shuffled Frog-Leaping Algorithm (SFLA) is applied to the data resulting from these measurements for data fusion from the sensors which is called SFLA-ANN. The initial weights of ANN are selected using SFLA. The goal is to assess the potency of the signal periodic component among these sensors. The efficiency of the proposed SFLA-ANN method is analyzed compared to hybrid methodologies of Simulated Annealing (SA) algorithm and ANN (SA-ANN) and Genetic Algorithm (GA) and ANN (GA-ANN).

References

[1] Ahmadi, M.A., Shadizadeh, S.R., Permeability prediction of carbonate reservoir by combining neural network and shuffled frog-leaping, Journal of American Science, 8, 2, 2012, 529-534.
Search in Google Scholar Back to article
[2] Alencar, A.S.C., Rocha Neto, A.R., Gomes, L.P.P., A new pruning method for extreme learning machines via genetic algorithms, Applied Soft Computing, 44, 2016, 101-107.10.1016/j.asoc.2016.03.019
Search in Google Scholar Back to article
[3] Alinaghian, M., Tirkolaee, E. B., Dezaki, Z. K., Hejazi, S. R., and Ding, W. An augmented Tabu search algorithm for the green inventory-routing problem with time windows. Swarm and Evolutionary Computation, 60, 2021, 100802.10.1016/j.swevo.2020.100802
Search in Google Scholar Back to article
[4] Amiri, B., Fathian, M., Maroosi, A., Application of shuffled frog-leaping algorithm on clustering, The International Journal of Advanced Manufacturing Technology, 45, 1-2, 2009, 199-209.10.1007/s00170-009-1958-2
Search in Google Scholar Back to article
[5] Amirkhani, S., Nasirivatan, S.H., Kasaeian, A.B., Hajinezhad, A., ANN and ANFIS models to predict the performance of solar chimney power plants, Renewable Energy, 83, 2015, 597-607.10.1016/j.renene.2015.04.072
Search in Google Scholar Back to article
[6] Anicic, O., Jović, S., Skrijelj, H., and Nedić, B., Prediction of laser cutting heat affected zone by extreme learning machine, Optics and Lasers in Engineering, 88, 2017, 1-4.10.1016/j.optlaseng.2016.07.005
Search in Google Scholar Back to article
[7] Bouyer, A., An optimized k-harmonic means algorithm combined with modified particle swarm optimization and Cuckoo Search algorithm, Foundations of Computing and Decision Sciences, 41, 2, 2016, 99-121.10.1515/fcds-2016-0006
Search in Google Scholar Back to article
[8] Caesarendra, W., Kosasih, B., Tieu, A.K, Zhu, H., Moodie, C.A.S., Zhu, Q., Acoustic emission-based condition monitoring methods: Review and application for low speed slew bearing, Mechanical Systems and Signal Processing, 72, 2016, 134–159.10.1016/j.ymssp.2015.10.020
Search in Google Scholar Back to article
[9] Chen, H. C., Lin, J. C., Yang, Y. K., & Tsai, C. H., Optimization of wire electrical discharge machining for pure tungsten using a neural network integrated simulated annealing approach, Expert Systems with Applications, 37, 10, 2010, 7147-7153.10.1016/j.eswa.2010.04.020
Search in Google Scholar Back to article
[10] Cheng, X., Zhang, X., Zhao, L., Deng, A., Bao, Y., Liu, Y., Jiang, Y., The application of Shuffled Frog Leaping Algorithm to Wavelet Neural Networks for acoustic emission source location, Comptes Rendus Mecanique, 342, 2014, 229-233.10.1016/j.crme.2013.12.006
Search in Google Scholar Back to article
[11] Dai, Y., and Zhu, K., A machine vision system for micro-milling tool condition monitoring, Precision Engineering, 52, 2018, 183-191.10.1016/j.precisioneng.2017.12.006
Search in Google Scholar Back to article
[12] Deniz, E., Aydogmus, O., Aydogmus, Z., Implementation of ANN-based Selective Harmonic Elimination PWM using Hybrid Genetic Algorithm-based optimization, Measurement, 85, 2016, 32-42.10.1016/j.measurement.2016.02.012
Search in Google Scholar Back to article
[13] Ding, Y., Fu, X., Kernel-based fuzzy c-means clustering algorithm based on genetic algorithm, Neuro Computing, 188, 2016, 233-238.10.1016/j.neucom.2015.01.106
Search in Google Scholar Back to article
[14] Downey, J., and Raghavendra, R., Comparison and analysis of audible sound energy emissions during single point machining of HSTS with PVD TiCN cutter insert across full tool life, Wear, 313, 1-2, 2014, 53-62.10.1016/j.wear.2014.02.004
Search in Google Scholar Back to article
[15] Ernst, R., Zwimpfer, F., and Dual, J., One sensor acoustic emission localization in plates, Ultrasonics, 64, 2016, 139-150.10.1016/j.ultras.2015.08.01026372509
Search in Google Scholar Back to article
[16] Eusuff, M., Lansey, K.E., Shuffled frog-leaping algorithm: A memetic meta-heuristic for discrete optimization, Engineering Optimization, 38, 2, 2006, 129-154.10.1080/03052150500384759
Search in Google Scholar Back to article
[17] Garcia-Plaza, E., Nunez, J.P., Salgado, D.R., Camber, I., Herrera Olivenz, A.J. M, Garcia Sanz Calcedo J., Surface Finish Monitoring in Taper Turning CNC Using Artificial Neural Network and Multiple Regression Methods. Procedia Engineering, 63, 2013, 599-607.10.1016/j.proeng.2013.08.245
Search in Google Scholar Back to article
[18] Goli, A., Zare, H.K., Tavakkoli-Moghaddam, R., and Sadeghieh, A. Hybrid artificial intelligence and robust optimization for a multi-objective product portfolio problem Case study: The dairy products industry. Computers and Industrial Engineering, 137, 2019, 106090.10.1016/j.cie.2019.106090
Search in Google Scholar Back to article
[19] Guo, Y.B., Ammula, S.C., Real-time acoustic emission monitoring for surface damage in hard machining, International Journal of Machine Tools and Manufacture, 45, 2005, 1622-1627.10.1016/j.ijmachtools.2005.02.007
Search in Google Scholar Back to article
[20] Heck, B.V., Yoon, J., He, D., Low speed bearing fault diagnosis using acoustic emission sensors, Applied Acoustics, 105, 2016, 35-44.10.1016/j.apacoust.2015.10.028
Search in Google Scholar Back to article
[21] Hekmati, A., Proposed method of partial discharge allocation with acoustic emission sensors within power transformers, Applied Acoustics, 100, 2015, 26-33.10.1016/j.apacoust.2015.07.011
Search in Google Scholar Back to article
[22] Jabha, D.F., Selvi, K., Joselin, R., A new approach for the failure prediction in XLPE power cables using acoustic emission technique, International Journal of Electrical Power and Energy Systems, 81, 2016, 336-345.10.1016/j.ijepes.2016.02.019
Search in Google Scholar Back to article
[23] Khehra, B.S., Pharwaha, A.P.S., Classification of Clustered Microcalcifications using MLFFBP-ANN and SVM, Egyptian Informatics Journal, 17, 1, 2016, 11-20.10.1016/j.eij.2015.08.001
Search in Google Scholar Back to article
[24] Lauro, H.C., Brandao, L.C., Baldo D, Reis R.A, Davim J.P., Monitoring and processing signal applied in machining processes – A review, Measurement, 58, 2014, 73–86.10.1016/j.measurement.2014.08.035
Search in Google Scholar Back to article
[25] Liao, Z., and Axinte, D. A., On monitoring chip formation, penetration depth and cutting malfunctions in bone micro-drilling via acoustic emission, Journal of Materials Processing Technology, 229, 2016, 82-93.10.1016/j.jmatprotec.2015.09.016
Search in Google Scholar Back to article
[26] Masmoudi S, Mahi A.E, Turki S., Use of piezoelectric as acoustic emission sensor for in situ monitoring of composite structures, Composites Part B, 80, 2015, 307-320.10.1016/j.compositesb.2015.06.003
Search in Google Scholar Back to article
[27] Oktem, H., Erzurumlu, T., & Erzincanli, F., Prediction of minimum surface roughness in end milling mold parts using neural network and genetic algorithm, Materials and design, 27, 9, 2006, 735-744.10.1016/j.matdes.2005.01.010
Search in Google Scholar Back to article
[28] Pawlak, J., Hercman, H., Numerical correlation of speleothem stable isotope records using a genetic algorithm, Quaternary Geochronology, 33, 2016, 1-12.10.1016/j.quageo.2015.12.005
Search in Google Scholar Back to article
[29] Petkovic, D., Shamshirband, S.H., Kamsin, A., Lee M., Anicic, O., Nicolic, V., Survey of the most influential parameters on the wind farm net present value (NPV) by adaptive neuro-fuzzy approach, Renewable and Sustainable Energy Reviews, 57, 2016, 1270-1278.10.1016/j.rser.2015.12.175
Search in Google Scholar Back to article
[30] Sangaiah, A.K., Tirkolaee, E.B., Goli, A., and Dehnavi-Arani, S. Robust optimization and mixed-integer linear programming model for LNG supply chain planning problem, Soft Computing, 2019, 1-21.10.1007/s00500-019-04010-6
Search in Google Scholar Back to article
[31] Slimani, I., El Farissi, I., and Achchab, S., The Comparison of Neural Networks’ Structures for Forecasting, International Journal of Supply and Operations Management, 4, 2, 2017, 105-114.
Search in Google Scholar Back to article
[32] Sousa, T., Morais, H., Castro, R., Val, Z., Simulated annealing to handle energy and ancillary services joint management considering electric vehicles, Electric Power Systems Research, 136, 2016, 383-397.10.1016/j.epsr.2016.03.031
Search in Google Scholar Back to article
[33] Teti, R, Jemielniak, K., Donnell, J.O., Dornfeld, D., Advanced monitoring of machining operations, CIRP Annals-Manufacturing Technology, 59, 2010, 717–739.10.1016/j.cirp.2010.05.010
Search in Google Scholar Back to article
[34] Tirkolaee, E. B., Goli, A., and Weber, G. W. Fuzzy mathematical programming and self-adaptive artificial fish swarm algorithm for just-in-time energy-aware flow shop scheduling problem with outsourcing option. IEEE Transactions on Fuzzy Systems, 28, 11, 2020, 2772-2783.10.1109/TFUZZ.2020.2998174
Search in Google Scholar Back to article
[35] Tirkolaee, E.B., Mahdavi, I., and Esfahani, M.M.S., A robust periodic capacitated arc routing problem for urban waste collection considering drivers and crew’s working time, Waste Management, 76, 2018, 138-146.10.1016/j.wasman.2018.03.015
Search in Google Scholar Back to article
[36] Tirkolaee, E.B., Mahmoodkhani, J., Bourani, M.R., and Tavakkoli-Moghaddam, R., A Self-Learning Particle Swarm Optimization for Robust Multi-Echelon Capacitated Location-Allocation-Inventory Problem, Journal of Advanced Manufacturing Systems, 18, 4, 2019, 677-694.10.1142/S0219686719500355
Search in Google Scholar Back to article
[37] Venkatesana, T., Sanavullah, M.Y., SFLA approach to solve PBUC problem with emission limitation, International Journal of Electrical Power and Energy Systems, 46, 2013, 1-9.10.1016/j.ijepes.2012.09.006
Search in Google Scholar Back to article
[38] Wang, L., Orban, P., Cunningham, A., and Lang, S., Remote real-time CNC machining for web-based manufacturing, Robotics and Computer-Integrated Manufacturing, 20, 6, 2004, 563-571.10.1016/j.rcim.2004.07.007
Search in Google Scholar Back to article
[39] Wieczorek, W., Inductive Synthesis of Cover-Grammars with the Help of Ant Colony Optimization, Foundations of Computing and Decision Sciences, 41, 4, 2016, 297-315.10.1515/fcds-2016-0016
Search in Google Scholar Back to article
[40] Wu, L., and Zhang, J., The variance-covariance method using IOWGA operator for tourism forecast combination, International Journal of Supply and Operations Management, 1, 2014, 152.
Search in Google Scholar Back to article
[41] Xiangqian, F, Shaowei H, Jun L, Congji W., Acoustic emission properties of concrete on dynamic tensile test, Construction and Building Materials, 114, 2016, 66-75.10.1016/j.conbuildmat.2016.03.065
Search in Google Scholar Back to article
[42] Xu, J., Yamada, K., Seikiya, K., Tanaka, R., and Yamane, Y., Effect of different features to drill-wear prediction with back propagation neural network, Precision Engineering, 38, 4, 2014 791-798.10.1016/j.precisioneng.2014.04.007
Search in Google Scholar Back to article
[43] Xu, S.X., Zhao, J., Zhan, J.M., Le, G., Research on a fault monitoring system in free-form surface CNC machining based on wavelet analysis, Journal of Materials Processing Technology, 129, 2002, 588–591.10.1016/S0924-0136(02)00653-2
Search in Google Scholar Back to article
[44] Yammani, C.H., Maheswarapu, S., Kumari Matam, S., A Multi-objective Shuffled Bat algorithm for optimal placement and sizing of multi distributed generations with different load models, International Journal of Electrical Power and Energy Systems, 79, 2016, 120-131.10.1016/j.ijepes.2016.01.003
Search in Google Scholar Back to article

An Integration of Neural Network and Shuffled Frog-Leaping Algorithm for CNC Machining Monitoring

Abstract

Paradigm

My account