References
- Åkesson, J. (2008). Optimica - An Extension of Modelica Supporting Dynamic Optimization. Paper presented at 6th International Modelica Conference, Bielefeld, Germany, 57–66. Retrieved from
https://portal.research.lu.se/portal/files/6062979/8253707.pdf - Al-Ahmari, A., Abidi, M., Ahmad, A., & Darmoul, S. (2016). Development of a virtual manufacturing assembly simulation system. Advances in Mechanical Engineering, 8(3), 1–13. doi: 10.1177/1687814016639824.
- Briesemeister, R., & Novaes, À. (2017). Comparing an approximate queuing approach with simulation for the solution of a cross-docking problem. Journal of Applied Mathematics, 6, 1–11. doi: 10.1155/2017/4987127
- Bronstein, I. N., & Semendiaiev, K. A. (1986). Guide on mathematics for engineers and students of higher education establishments. Moscow, Russia: Nauka.
- Dmytriv, V., Dmytriv, I., Lavryk, Y., & Horodeckyy, I. (2018). Models of adaptation of the milking machines systems. Contemporary Research Trends in Agricultural Engineering. BIO Web of Conferences, 10, 02004. doi:10.1051/bioconf/20181002004
- Gálová, K., Rajnoha, R., & Ondra, P. (2018). The Use Of Industrial Lean Management Methods In The Economics Practice: An Empirical Study Of The Production Companies In The Czech Republic. Polish Journal of Management Studies, 17(1), 93–104.
- García, S. G., & García, M. G. (2018). Design and Simulation of Production and Maintenance Management Applying the Viable System Model: The Case of an OEM Plant. Materials, 11, 1346. doi:10.3390/ma11081346
- Ivanov, D. (2017). Operations and supply chain simulation with AnyLogic. Decision-oriented introductory notes for master students. Berlin School of Economics and Law. Retrieved from
https://www.anylogic.com/upload/pdf/Ivanov_AL_book_2017.pdf - Kibira, D., & Shao, G. (2016). Virtual Factory Framework for Supporting Production Planning and Control. Conference Paper in IFIP Advances in Information and Communication Technology. doi: 10.1007/978-3-319-51133-7_35
- Kikolski M. & Ko C-H. (2018). Facility layout design – review of current research directions. Engineering Management in Production and Services, 10(3), 70–79. doi: 10.2478/emj-2018-0018
- Kodra, Yu. V., Stotsko, Z. A., & Havrylchenko, O. V. (2008). Loading devices of technological machines. Calculation and construction. Manual. Lviv, Ukraine: Publishing house “Beskyd Bit”.
- Mourtzis, D. (2019). Simulation in the design and operation of manufacturing systems: state of the art and new trends. International Journal of Production Research, 58(7), 1927–1949. doi: 10.1080/00207543.2019.1636321
- Mourtzis, D., Papakostas, N., Mavrikios, D., Makris, S., & Alexopoulos, K. (2015). The Role of Simulation In Digital Manufacturing – Applications And Outlook. International Journal of Computer Integrated Manufacturing, 28(1), 3–24. doi: 10.1080/0951192X.2013.800234
- Rahman, Ch., & Ullah, S. (2015). Process Flow Improvement Proposal of a Batch Manufacturing System Using ARENA Simulation Modeling. Review of General Management, 21(1), 63–77.
- Ran, L., Xiaolei, X., Kaiye, Y., & Qiaoyu, H. (2018). A survey on simulation optimization for the manufacturing system operation. International Journal of Modelling and Simulation, 38(2), 116–127. doi: 10.1080/02286203.2017.1401418
- Shao, G., Brodsky, A., Shin, S.-J., & Kim, D. B. (2014). Decision guidance methodology for sustainable manufacturing using process analytics formalism. Journal of Intelligent Manufacturing, 28(2), 455–472. doi: 10.1007/s10845-014-0995-3
- Sobolewski, J. (red.), Sieminski, P., & Sobieszczanski, J. (2012). Technologies of production and projection of technological processes. Warsaw, Poland: Politechnika Warszawska.
- Sujová, E., Cierna, H., & Bambura, R. (2019). Simulation model of production as tool for industry 4.0 implementation into practice. 18-th International Scientific Conference Engineering for Rural Development. doi: 10.22616/ERDev2019.18.N279
- Tkaczyk, S., & Roszak, M. (2002). Analysis of the technological process based on the added value criterion. 11 International Conference AMME’2002, Gliwice-Zakopane. Retrieved from
http://www.journalamme.org/papers_amme02/11121.pdf - Wędrychowicz, M., & Bydałek, A. (2017). Optimization of the production process of “Glogow II” melting with application of technological supplement CaF2. Methods and Instruments of Production Technique, 2, 123–132.
- Zwierzyński, P., & Ahmad, H. (2018). Seru production as an alternative to a traditional assembly line. Engineering Management in Production and Services, 10(3), 62–69. doi: 10.2478/emj-2018-0017