References
- Moasas AM, Amin MN, Khan K, Ahmad W, Al-Hashem MN, Deifalla A, et al. A worldwide development in the accumulation of waste tires and its utilization in concrete as a sustainable construction material: A review. Case Stud Constr Mater. 2022;17:01677. DOI: 10.1016/j.cscm.2022.e01677.
- Valentini F, Pegoretti A. End-of-life options of tyres. A review. Adv Ind Eng Polym Res. 2022;5(4):203-213. DOI: 10.1016/j.aiepr.2022.08.006.
- Global Opportunity Analysis and Industry Forecast, 2023-2032, 2022. Available from: www.alliedmarketresearch.com/tire-recycling-market-A17016.
- Heideman G, Noordermeer J, Datta R, Baarle B. Zinc loaded clay as activator in sulfur vulcanization: A new route for zinc oxide reduction in rubber compounds. Rubber Chem Technol. 2004;77(2):336-55. DOI: 10.5254/1.3547827.
- Alam MN, Kumar V, Park S-S. Advances in rubber compounds using ZnO and MgO as co-cure activators. Polymers. 2022;14(23):5289. DOI: 10.3390/polym14235289.
- Stelmach S. Piroliza odpadów jako element gospodarki o obiegu zamkniętym (Pyrolysis of waste as a component of circular economy) Gliwice: Silesian University of Technology Publishing House. 2019;16-68. Available from: www.itpe.pl/monografie-piroliza-odpadow-jako-element-gospodarki-o-obieguzamknietym/.
- Stelmach S. Potencjalne metody zagodspodarowania karbonizatów z opon samochodowych (Potential methods for the utilisation of chars from used tyres), Arch of Was Man and Env Prot. 2011;13(3):37-52. Available from: www.yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-article-BSL4-0012-0004.
- Lewandowski W, Januszewicz K, Kosakowski W. Efficiency and proportions of waste tyre pyrolysis products depending on the reactor type - A review. J Anal Appl Pyrolysis. 2019;140:25-53. DOI: 10.1016/j.jaap.2019.03.018.
- Ryms M, Januszewicz K, Lewandowski W, Klugmann-Radziemska E. Pyrolysis process of whole waste tires as a biomass energy recycling. Ecol. Chem. Eng S. 2013;20(1):93-107. DOI: 10.2478/eces-2013-0007.
- Williams PT. Pyrolysis of waste tyres: A review. Waste Manage. 2013;33:(8):1714-28. DOI: 10.1016/j.wasman.2013.05.003.
- Rowhani A, Rainey T. Scrap tyre management pathways and their use as a fuel - A review. Energies. 2016;9(11):888. DOI: 10.3390/en9110888.
- Gao N, Wang F, Quan C, Santamaria L, Lopez G, Williams PT. Tire pyrolysis char: Processes, properties, upgrading and applications. Prog Energy Combust Sci. 2022;93:101022. DOI: 10.1016/j.pecs.2022.101022.
- Shah J, Rasul M, Mabood F, Shahid M. Conversion of waste tyres into carbon black and their utilization as adsorbent. J Chin Chem Soc. 2006;53. DOI: 10.1002/jccs.200600144.
- Xiao Z, Pramanik A, Basak A, Prakash C, Shankar S. Material recovery and recycling of waste tyres -A review. Cleaner Materials. 2022;5:100115. DOI: 10.1016/j.clema.2022.100115.
- Yang Y, Xu S, Wu C. Roles of carbon black or carbon fibre on improving mechanical and electromagnetic properties of ultra-high performance concrete in K-band frequency range. J Sust Cem-Based Mat. 2023;12(7):856-70. DOI: 10.1080/21650373.2022.2119619.
- Yu J, Xu J, Li Z, He W, Huang J, Xu J, et al. Upgrading pyrolytic carbon-blacks (CBp) from end-of-life tires: Characteristics and modification methodologies. Front Environ Sci Eng. 2019;14(2):19. DOI: 10.1007/s11783-019-1198-0.
- Martínez JD, Cardona-Uribe N, Murillo R, García T, López JM. Carbon black recovery from waste tire pyrolysis by demineralization: Production and application in rubber compounding. Waste Manage. 2019;85:574-84. DOI: 10.1016/j.wasman.2019.01.016.
- ASTM D1509-18 Standard Test Methods for Carbon Black-Heating Loss. Available from: www.astm.org/d1509-18.html.
- ISO 1171:2024. Coal and coke - Determination of ash. Available from: https://www.iso.org/standard/86977.html.
- PN-G-04516:1998. Oznaczanie zawartości części lotnych metodą wagową (Solid fuels - Determination of volatile matter content using the gravimetric method). Available from: https://sklep.pkn.pl/pn-g-04516-1998p.html?options=cart.
- ASTM D1513-05(2017) Standard Test Method for Carbon Black, Pelleted-Pour Density. Available from: www.astm.org/d1513-05r17.html.
- ASTM D1512-21 Standard Test Methods for Carbon Black-pH Value. Available: www.astm.org/d1512-21.html.
- ASTM D1618-18 Standard Test Method for Carbon Black Extractables-Transmittance of Toluene Extract. Available from: www.astm.org/d1618-18.html.
- ASTM D6556-21 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption. Available from: www.astm.org/d6556-21.html.
- PN-EN 15309:2010 Characterization of waste and soil -- Determination of elemental composition using X-ray fluorescence. Available from: www.intertekinform.com/en-gb/standards/pn-en-15309-2010-935449_saig_pkn_pkn_2203895/?srsltid=AfmBOopl644_6H4xcX862Phd-FJvVH0DeDArUFg1HFqsJcGKMQmeDLr3.
- Krzak M, Milewska-Duda J, Jodłowski G, Bytnar K, Żmuda WA. The method of processing carbonates obtained by pyrolysis of waste rubber. Patent application PL. P.423325 from 31.10.2017.
- Żmuda W, Grzywacz P, Wojciechowski A, Doliński A, Krzak M. Abatement of emissions of sulfur oxides from combustion of a fuel based on waste tire char. Przem Chem. 2016;1(5):101-3. DOI: 10.15199/62.2016.5.15.
- González-González R, Ruiz-Gomez N, Gea G, Vazquez-Pinon M, Martinez-Chapa SO, Caballero P, et al. Valorization of waste tires by pyrolysis and activation processes. Appl Sci. 2021;11(14):6342. DOI: 10.3390/app11146342.
- Alvarez J, Lopez G, Amutio M, Bilbao J, Olazar M. Upgrading the rice husk char obtained by flash pyrolysis for the production of amorphous silica and high quality activated carbon. Bioresour Technol. 2014;170:132-7. DOI: 10.1016/j.biortech.2014.07.073.
- Ilnicka A, Okoński J, Cyganiuk A, Patyk J, Lukaszewicz J. Zinc regarding the utilization of waste tires by pyrolysis. Pol J Environ Stud. 2016;25(6):2683-7. DOI: 10.15244/pjoes/62095.
- Ken BS, Nandi BK. Effect of some operational parameters on desulphurization of high sulphur Indian coal by KOH leaching. Energy Exploration Exploitation. 2018;36(6):1674-91. Available from: www.jstor.org/stable/90026318.