Bi-Directional Position and Speed Estimation Algorithm for Sensorless Control of BLDC Motor
References
- [1] C.-T. Lin, C.-W. Hung and C.-W. Liu, “Sensorless Control for Four-Switch Three-Phase Brushless DC Motor Drive”,
Conf. Rec. 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting , pp. 2048–2053, 2006.https://doi.org/10.1109/IAS.2006.256817">https://doi.org/10.1109/IAS.2006.256817 10.1109/IAS.2006.256817 - [2] J. X. Shen, Z. Q. Zhu and D. Howe, “Sensorless Flux-Weakening Control of Permanent-Magnet Brushless Machines Using Third Harmonic Back EMF”,
IEEE Trans. Ind. Appl ., vol. 40, no. 6, pp. 1629–1636, 2004.https://doi.org/10.1109/TIA.2004.836157">https://doi.org/10.1109/TIA.2004.836157 10.1109/TIA.2004.836157 - [3] J. X. Shen and S. Iwasaki, “Sensorless Control of Ultrahigh-Speed PM Brushless Motor Using PLL and Third Harmonic Back EMF”,
IEEE Trans. Ind. Electron. , vol. 53, no. 2, pp. 421–428, 2006.https://doi.org/10.1109/TIE.2006.870664">https://doi.org/10.1109/TIE.2006.870664 10.1109/TIE.2006.870664 - [4] S. Ogasawara and H. Akagi, “An Approach to Position Sensorless Drive for Brushless DC Motors”,
IEEE Trans. Ind. Appl ., vol. 27, no. 5, pp. 928–933, 1991.https://doi.org/10.1109/28.90349">https://doi.org/10.1109/28.90349 10.1109/28.90349 - [5] X. Z. Zhang and Y. N. Wang, “A Novel Position-Sensorless Control Method for Brushless DC Motors”,
Energy Conversion and Management , vol. 52, no. 3, pp. 1669–1676, 2010.https://doi.org/10.1016/j.enconman.2010.10.030">https://doi.org/10.1016/j.enconman.2010.10.030 10.1016/j.enconman.2010.10.030 - [6] T-W. Chun, Q-V. Tran, H.-H. Lee, H.-G. Kim, “Sensorless Control of BLDC Motor Drive for an Automotive Fuel Pump Using a Hysteresis Comparator”,
IEEE Trans. Power Electron ., vol. 29, no. 3, pp. 1382–1391, 2014.https://doi.org/10.1109/TPEL.2013.2261554">https://doi.org/10.1109/TPEL.2013.2261554 10.1109/TPEL.2013.2261554 - [7] H. Ghassemi and S. Vaez-Zadeh, “A Very Fast Direct Torque Control for Interior Permanent Magnet Synchronous Motors Startup”,
Energy Conversion and Management , vol. 46, no. 5, pp. 715–726, 2005.https://doi.org/10.1016/j.enconman.2004.05.005">https://doi.org/10.1016/j.enconman.2004.05.005 10.1016/j.enconman.2004.05.005 - [8] B. Asaei and A. Rostami, “A Novel Starting Method for BLDC Motors Without the Position Sensors”,
Energy Conversion and Management , vol. 50, no. 2, pp. 337–343, 2008.https://doi.org/10.1016/j.enconman.2008.09.020">https://doi.org/10.1016/j.enconman.2008.09.020 - [9] A. Stirban, I. Boldea, and G. D. Andreescu, “Motion Sensorless Control of BLDC-PM Motor with Offline FEM Information Assisted Position and Speed Observer”,
IEEE Trans. Ind. Appl ., vol. 48, no. 6, pp. 1950–1958, 2012.https://doi.org/10.1109/TIA.2012.2226194">https://doi.org/10.1109/TIA.2012.2226194 10.1109/TIA.2012.2226194 - [10] B. Terzic and M. Jadric, “Design and Implementation of the Extended Kalman Filter for the Speed and Rotor Position Estimation of Brushless DC Motor”,
IEEE Trans. Ind. Electron ., vol. 48, no. 6, pp. 1065–1073, 2001.https://doi.org/10.1109/41.969385">https://doi.org/10.1109/41.969385 - [11] A. Rostami and B. Asaei, “A Novel Method for Estimating the Initial Rotor Position of PM Motors Without the Position Sensor”,
Energy Conversion and Management , vol. 50, no. 8, pp. 1879–1883, 2009.https://doi.org/10.1016/j.enconman.2009.04.029">https://doi.org/10.1016/j.enconman.2009.04.029 10.1016/j.enconman.2009.04.029 - [12] S. M. Kazraj, R. B. Soflayi and M. B. B. Sharifian, “Sliding-Mode Observer for Speed and Position Sensorless Control of Linear-PMSM”,
Electrical, Control and Communication Engineering , vol. 5, no. 1, pp. 20–26, 2014.https://doi.org/10.2478/ecce-2014-0003">https://doi.org/10.2478/ecce-2014-0003 10.2478/ecce-2014-0003 - [13] K. Krykowski and J. Hetmanczyk, “Constant Current Models of Brushless DC Motor”,
Electrical, Control and Communication Engineering , vol. 3, no. 1, pp. 19–24, 2013.https://doi.org/10.2478/ecce-2013-0010">https://doi.org/10.2478/ecce-2013-0010 10.2478/ecce-2013-0010 - [14] M. V. Ramesh, G. S. Rao, J. Amarnath, S. Kamakshaiah and B. Jawaharlal, “Speed torque characteristics of brushless DC motor in either direction on load using ARM controller”,
IEEE PES conference on Innovative Smart Grid Technologies , pp. 217–222, Dec. 2011.https://doi.org/10.1109/iset-india.2011.6145385">https://doi.org/10.1109/iset-india.2011.6145385 10.1109/iset-india.2011.6145385 - [15] D. Das, N. Kumaresan, V. Nayanar, K. N. Sam and N. A. Gounden, “Development of BLDC Motor-Based Elevator System Suitable for DC Microgrid”,
IEEE/ASME Transactions on Mechatronics , vol. 21, no. 3, pp. 1552–1560, June 2016.https://doi.org/10.1109/TMECH.2015.2506818">https://doi.org/10.1109/TMECH.2015.2506818 10.1109/TMECH.2015.2506818 - [16] S. K. Awaze, “Four quadrant operation of BLDC motor in MATLAB/SIMULINK”,
IEEE International Conference on Computational Intelligence and Communication Networks , pp. 569–573, Sept. 2013.https://doi.org/10.1109/CICN.2013.124">https://doi.org/10.1109/CICN.2013.124 10.1109/CICN.2013.124 - [17] R. Shanmugasundram, K. M. Zakariah and N. Yadaiah, “Implementation and performance analysis of digital controllers for brushless DC motor drives”,
IEEE/ASME Trans. Mechatronics , vol. 19, no. 1, pp. 213–224, 2014.https://doi.org/10.1109/TMECH.2012.2226469">https://doi.org/10.1109/TMECH.2012.2226469 10.1109/TMECH.2012.2226469 - [18] M. Zerikat and S. Chekroun, “Design and Implementation of a Hybrid Fuzzy Controller for a High-Performance Induction Motor”,
International Journal of Computer and Information Engineering , vol. 1, no. 2, pp. 202–208, 2007.https://doi.org/10.5281/zenodo.1333794">https://doi.org/10.5281/zenodo.1333794 10.5281/zenodo.1333794 - [19] A. V. Sant and K. R. Rajagopal, “PM Synchronous Motor Speed Control Using Hybrid Fuzzy-PI with Novel Switching Functions”,
IEEE Trans. on Magnetics , vol. 45, no. 10, pp. 4672–4675, 2009.https://doi.org/10.1109/TMAG.2009.2022191">https://doi.org/10.1109/TMAG.2009.2022191 - [20] A. Rubaai, D. Ricketts and M. D. Kankam, “Experimental Verification of a Hybrid Fuzzy Control Strategy for a High-Performance Brushless DC Drive System”,
IEEE Trans. Ind. Appl ., vol. 37, no. 2, pp. 503–512, 2001.https://doi.org/10.1109/28.913715">https://doi.org/10.1109/28.913715 10.1109/28.913715 - [21] M. T. DiRenzo, “Switched Reluctance Motor Control – Basic Operation and Example Using the TMS320F240”, Texas Instruments, SPRA420A Application Report, Digital Signal Processing Solutions, 2000.
- [22] D.-H. Lee et al., “A Current Ripple Reduction of a High-Speed Miniature Brushless Direct Current Motor Using Instantaneous Voltage Control”,
IET Electric Power Applications , vol. 3, no. 2, pp. 85–92, 2009.https://doi.org/10.1049/iet-epa:20070490">https://doi.org/10.1049/iet-epa:20070490 10.1049/iet-epa:20070490 - [23] C.-L. Xia,
Permanent Magnet Brushless DC Motor Drives and Controls . Singapore: John Wiley & Sons Ltd., 2012. - [24] T.-S. Kim, B.-G. Park, D.-M. Lee, Ji-Su Ryu and D.-S. Hyun, “A New Approach to Sensorless Control Method for Brushless DC Motors”,
International Journal of Control, Automation and Systems , vol. 6, no. 4, pp. 477–487, 2008. - [25] J.-W. Park, S.-H. Hwang and J.-M. Kim, “Sensorless Control of Brushless DC Motors with Torque Constant Estimation for Home Appliances”,
IEEE Trans. Ind. Appl ., vol. 48, no. 2, pp. 677–684, 2012.https://doi.org/10.1109/TIA.2011.2181774">https://doi.org/10.1109/TIA.2011.2181774 10.1109/TIA.2011.2181774
DOI: https://doi.org/10.2478/ecce-2018-0015 | Journal eISSN: 2255-9159
Language: English
Page range: 125 - 133
Published on: Mar 12, 2019
Published by: Riga Technical University
In partnership with: Paradigm Publishing Services
Publication frequency: 2 times per year
Keywords:
Related subjects:
© 2019 Mitesh B. Astik, Praghnesh Bhatt, Bhavesh R. Bhalja, published by Riga Technical University
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.