Have a personal or library account? Click to login
Library of Samples for E-Vehicle Propulsion Drive Tuning Cover

Library of Samples for E-Vehicle Propulsion Drive Tuning

Electrical, Control and Communication Engineering
Volume 5 (2014): Issue 1 (May 2014)
By: Anton Rassõlkin,  Liisa Liivik,  Valery Vodovozov and  Zoja Raud  
Open Access
|May 2014

References

  1. [1] Test Facilities for Automotive Research and Development, IKA Institut für Kraftfahrzeuge. RWTH Aachen University, FKA Forschungsgesellschaft Kraftfahrwesen mbH, Aachen, Germany, 2011, 44 p.
    Search in Google Scholar
  2. [2] F. Marra, D. Sacchetti, A. B. Pedersen, P. B. Andersen, C. Træholt and E. Larsen, “Implementation of an electric vehicle test bed controlled by a virtual power plant for contributing to regulating power reserves,” IEEE Power & Energy Society General Meeting, San Diego, USA, 2012, p 17.10.1109/PESGM.2012.6345269
    Search in Google Scholar
  3. [3] F. Abrahamsen, F. Blaabjerg, J. K. Pedersen, P. Z. Grabowski and P. Thøgersen, “On the energy optimized control of standard and high efficiency induction motors in CT and HVAC applications,” IEEE Transactions on Industrial Applications, v. 34, no. 4, 1998, pp. 822-831.10.1109/28.703985
    Search in Google Scholar
  4. [4] Y. Cheng, V.-M. Joeri and P. Lataire, “Research and test platform for hybrid electric vehicle with the super capacitor based energy storage,” European Conference on Power Electronics and Applications EPE-2007, Aalborg, Denmark, 2007, pp. 110.10.1109/EPE.2007.4417332
    Search in Google Scholar
  5. [5] R. Miceli, M. Montana, G. R. Galluzzo, R. Rizzo and G. Vitale, “A test cycle for the standardization and characterization of electric drives for electric vehicles − Experimental approach,” International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth PEDES-1996, New Delhi, India, 1996, pp. 313317.
    Search in Google Scholar
  6. [6] J. Riveros, B. Bogado, J. Prieto, F. Barrero, S. Toral and M. Jones, “Multiphase machines in propulsion drives of electric vehicles,” 14th International Power Electronics and Motion Control Conference EPEPEMC-2010, Ohrid, Macedonia, 2010, pp. T5-201T5-206.10.1109/EPEPEMC.2010.5606658
    Search in Google Scholar
  7. [7] T. Letrouvé, A. Bouscayrol, W. Lhomme, N. Dollinger and F. M. Calvairac, “Different models of a traction drive for an electric vehicle simulation,” IEEE Vehicle Power and Propulsion Conference VPPC-2010, Lille, France, 2010, pp. 16.10.1109/VPPC.2010.5729209
    Search in Google Scholar
  8. [8] ABB, Technical Guide No. 1: Direct Torque Control, ABB, Helsinki, Finland, 2002.
    Search in Google Scholar
  9. [9] IEC 60034-2-1: Rotating Electrical Machines - Part 2-1: Standard Methods for Determining Losses and Efficiency from Tests, 2007.
    Search in Google Scholar
  10. [10] IEC 60034-30: Rotating Electrical Machines - Part 30: Efficiency Classes of Single-Speed Three-Phase Cage-Induction Motors, 2008.
    Search in Google Scholar
  11. [11] J. O. Estima and A. J. M. Cardoso, “Efficiency analysis of drive train topologies applied to electric/hybrid vehicles,” IEEE Transactions on Vehicular Technology, v. 61, no. 3, 2012, pp. 10211031.10.1109/TVT.2012.2186993
    Search in Google Scholar
  12. [12] F. Abrahamsen, Energy Optimal Control of Induction Motor Drives: Doctoral Dissertation, Aalborg University, Institute of Energy Technology, 2000.
    Search in Google Scholar
  13. [13] P. Angers, “Variable frequency drive testing,” Motor Efficiency Performance Standards Conference, Sydney, Australia, 2009, pp. 4-5.
    Search in Google Scholar
  14. [14] C. M. Burt, X. Piao, F. Gaudi, B. Busch and N. F. N. Taufik, “Electric motor efficiency under varying frequencies and loads”, Journal of Irrigation and Drainage Engineering, v. 134, 2009, pp. 129-136.10.1061/(ASCE)0733-9437(2008)134:2(129)
    Search in Google Scholar
  15. [15] J. Viholainen, J. Kortelainen, T. Ahonen, N. Aranto and E. Vakkilainen, “Energy efficiency in variable speed drive (VSD) controlled parallel pumping,” 6th International Conference on Energy Efficiency in Motor Driven Systems EEMODS-2009, Nantes, France, 2009, pp. 519530.
    Search in Google Scholar
  16. [16] M. Rodič, K. Jezernik, M. Trlep, “Use of dynamic emulation of mechanical loads in the testing of electrical vehicle driveline control algorithms,” European Conference on Power Electronics and Applications EPE-2007, Aalborg, Denmark, 2007, pp. 110.10.1109/EPE.2007.4417707
    Search in Google Scholar
  17. [17] C. Lungoci, D. Bouquain, A. Miraoui and E. Helerea, “Modular test bench for a hybrid electric vehicle with multiple energy sources,” 11th International Conference on Optimization of Electrical and Electronic Equipment OPTIM-2008, "Transilvania" University of Brasov, Brasov, Romania, 2008, pp. 299306. 10.1109/OPTIM.2008.4602424
    Search in Google Scholar
DOI: https://doi.org/10.2478/ecce-2014-0004 | Journal eISSN: 2255-9159
Journal RSS Feed
Language: English
Page range: 27 - 33
Published on: May 17, 2014
Published by: Riga Technical University
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Automotive applications,
Electric vehicles,
Test equipment,
Variable speed drives
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2014 Anton Rassõlkin, Liisa Liivik, Valery Vodovozov, Zoja Raud, published by Riga Technical University
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous articleVolume 5 (2014): Issue 1 (May 2014)Next article