References
- Baran, Ö., Sukuroglu, E. E., Efeoglu, I., Totik, Y., 2016. The investigation of adhesion and fatigue properties of TiN/TaN multilayer coatings, Journal of Adhesion Science and Technology, 30, 20, 2188-2200, DOI: 10.1080/01694243.2016.1176662
- Barkovskaya, M.M., Uglov, V.V., Khodasevich, V.V., 2011. Composition and Corrosion Resistance of Coatings on the Basis of Nitrides of Titanium and Chromium, Journal of Surface Investigation, X-ray, Synchrotron and Neutron Techniques, 5, 402-407, DOI: 10.1134/S1027451011040069
- Bouzakis, K. D., Asimakopoulos, A., Batsiolas, M., 2008. Characterization of fatigue and adhesion properties of a-C:H/CrN coatings on bearing rings by impact tests, Surface and Coatings Technology, 202, 24, 5929-5935, DOI: 10.1016/j.surfcoat.2008.06.182
- Choi, H. S., Han, D. H., Hong, W. H., Lee, J. J., 2009. Titanium, chromium nitride coatings for bipolar plate of polymer electrolyte membrane fuel cell, Journal of Power Sources, 189, 966-971, DOI: 10.1016/j.jpowsour.2008.12.060
- Datta, S., Das, M., Balla, V. K., Bodhak, S., Murugesan, V. K., 2018. Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings, Surface and Coatings Technology, 344, 214-222, DOI: 10.1016/j.surfcoat.2018.03.019
- Drábik, M., Truchlý, M., Ballo, V., Roch, T., Kvetková, L., Kúš, P., 2018. Influence of substrate material and its plasma pretreatment on adhesion and properties of WC/a-C:H nanocomposite coatings deposited at low temperature, Surface and Coatings Technology, 333, 138-147, DOI: 10.1016/j.surfcoat.2017.10.081
- Fazel, Z. A., Elmkhah, H., Molaei, M., Riahi-Noori, N., Fattah-Alhosseini, A., 2024. Corrosion behavior of TiN monolayer and CrN/TiN multilayer coatings: Impact of immersion time and saline solution type, International Journal of Applied Ceramic Technology, 21, 4270-4279, DOI: 10.1111/ijac.14838
- Grainger, S., Blunt, J., 1998. Engineering coatings, design and application, Woodhead, 2nd edition, Metals and Surface Engineering.
- Hadzima, B., Liptáková, T., 2008. Základy Elektrochemickej korózie kovov/Fundamentals of Electrochemical Corrosion of Metals, EDIS: Žilina, Slovakia.
- Jech, J., 1983. Head Treatment of Steels. SNTL Praha, Czechia.
- Khoshnaw, F., Gubner, R., 2021. Corrosion Atlas Case Studies. Part I: General Aspects of Corrosion, Corrosion Control, and Corrosion Prevention, Elsevier: Amsterdam, The Netherlands, 108, DOI: 10.1016/C2020-0-00630-4
- Kim, K. R., Suh, C. M., Murakami, R. I., Chung, C. W., 2003. Effect of intrinsic properties of ceramic coatings on fatigue behaviour of Cr–Mo–V steels, Surface and Coatings Technology, 171, 1-3,15-23, DOI: 10.1016/S0257-8972(03)00229-9
- Lou, J., Gao, Z., Yhang, J., He, H., Wang, X., 2021. Comparative Investigation on Corrosion Resistance of Stainless Steels Coated with Titanium Nitride, Nitrogen Titanium Carbide and Titanium-Diamond-like Carbon Films, Coatings, 11, 1543, DOI: 10.3390/coatings11121543
- Madej, M., Marczewska-Boczkowska, K., Ozimina, D., 2014. Effect of tungsten on the durability of diamond-like carbon coatings in the chemical industry, Przemysl Chemiczny/Chemical Industry, 93, 4, 500-505.
- Madej, M., Ozimina, D., Kurzydlowski, K., Plocinski, T., Wiecinski, P., Styp-Rekowski, M., Matuszewski, M., 2015. Properties of diamond-like carbon coatings deposited on CoCrMo alloys, Transaction of Famena, 39, 1, 79-88.
- Moravčík, R., Hazlinger, M., 2017. Degradation processes and life-time prediction, Aleš Čenek, Plzeň, Czechia.
- Ou, Y.X., Lin, J., Tong, S., Sproul, W.D., Lei, M. K., 2016. Structure, adhesion and corrosion behavior of CrN/TiN superlattice coatings deposited by the combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering, Surface and Coatings Technology, 293, 21-27, DOI: 10.1016/j.surfcoat.2015.10.009
- Park, Y. G., Wey, M. Y., Hong, S. I., 2007. Enhanced wear and fatigue properties of Ti–6Al–4V alloy modified by plasma carburizing/CrN coating, Journal of Materials Science: Materials in Medicine, 18, 925-931.
- Piotrowska, K., Granek, A., Madej, M., 2020. Assessment of Mechanical and Tribological Properties of Diamond-Like Carbon Coatings on the Ti13Nb13Zr Alloy, Open Engineering, 10, 1, 536-545, DOI: 10.1515/eng-2020-0043
- Puchi-Cabrera, E. S., Matinez, F., Herrera, I., Berrios, J. A., Dixit, S., Bhat, D., 2004. On the fatigue behaviour of an AISI 316L stainless steel coated with a PVD TiN deposit, Surface and Coatings Technology, 182, 2-3, 276-286, DOI: 10.1016/j.surfcoat.2003.07.003
- Rabadzhiyska, S., Kolaklieva, L., Chitanova, V., Cholakova, T., Kakanakova, R., Dimchevab, N., Balashevc, K., 2018. Mechanical, wear and corrosion behavior of CrN/TiN multilayer coatings deposited by low temperature unbalanced magnetron sputtering for biomedical applications, Materials Today: Proceedings, 5, 16012–16021, DOI: 10.1016/j.matpr.2018.05.046
- Shiozawa, K., Oshima, S., 1990. Effect of TiN coating on fatigue strength of carbon steel, Journal of Society of Materials Science, 39, 442, 927.
- Souto, R. M., Alanyali, H., 2000. Electrochemical characteristics of steel coated with TiN and TiAlN coatings, Corrosion Science, 42, 2201-2211, DOI:10.1016/S0010-938X(00)00057-3
- Su, Y. L., Yao, S. H., Wei, C. S., Wu, C. T., 1998. Tension and fatigue behaviour of a PVD TiN-coated material, Thin Solid Films, 315, 1-2, 153-158, DOI: 10.1016/S0040-6090(97)00707-4
- Subramanian, B., Jayachandran, M., 2011. Preparation of chromium oxynitride and chromium nitride films by DC reactive magnetron sputtering and their material properties, Corrosion Engineering, Science and Technology, 46, 4, 554-561, DOI: 10.1179/147842209X12579401586807
- Toshioka, N., Nishimoto A., 2020. Surface-modified layer formed by plasma nitriding using chromium screen, Materials Transactions, 61, 6, 1115-1121, DOI: 10.2320/matertrans.HM2020815
- Wilson, A., Matthews, A., Housden, J., Turner, R., Garside, B., 1993. A comparison of the wear and fatigue properties of plasma-assisted physical vapour deposition TiN, CrN and duplex coatings on Ti-6Al-4V, 62, 1-3, 600-607, DOI: 10.1016/0257-8972(93)90306-9
- Yonekura, D., Fujita, J., Miki, K., 2015. Fatigue and wear properties of Ti–6Al–4V alloy with Cr/CrN multilayer coating, Surface and Coatings Technology, 275, 232-238, DOI: 10.1016/j.surfcoat.2015.05.014