Mechanical Properties of Chromium Steel Drills in the Context of Durability and Safety of Use
References
- Bagni, C., Askes, H., Susmel, L., 2016.
Gradient elasticity: a transformative stress analysis tool to design notched components against uniaxial/multiaxial high-cycle fatigue , Fatigue & Fracture of Engineering Materials & Structures, 39(8), 1012-1029. DOI: 10.1111/ffe.12447 - Bansal, K. L., 1990.
Effect of Tempering on the Microstructure and Hardness of Steel , Journal of Materials Science, 25(5), 3275-3281 - Botti, L., Martin, B., Barr, A., Kapellusch, J., Mora, C., Rempel, D., 2020.
R2: Drilling into concrete: Effect of feed force on handle vibration and productivity , International Journal of Industrial Ergonomics, 80, 103049. DOI: 10.1016/j.ergon.2020.103049 - Botti, L., Mora C., Antonucci, A., Carty, P., Barr, A., Rempel, D., 2017.
Carbide-tipped bit wear patterns and productivity with concrete drilling , Wear, 386-387, 58-62. DOI: 10.1016/j.wear.2017.05.017 - Bryant, M. D., White, D. A., 2000.
Tool Wear and Failure Mechanisms in Drilling , Wear, 240, 54-63 - Fialko, N. et al., 2019.
Environmental aspects of heat recovery systems of boiler plants . E3S Web of Conf., 100, art. 00015. DOI: 10.1051/e3sconf/201910000015 - Holm, W.E.R., 2005.
Wear Mechanisms and Durability of Drilling Tools , Tribology International, 33, 893-905 - Hu, D., Yue, C., Liu, X., Jiang, Z., Xu, Y., Lu, J., Liang, S., 2024.
Drilling process of indexable drill bit based on Coupled Eulerian-Lagrangian method: A simulation study , Chinese Journal of Aeronautics, 37(11), 477-492. DOI: 10.1016/j.cja.2024.03.046 - Jantunen, E., 2002.
A summary of methods applied to tool condition monitoring in Drilling , International Journal of Machine Tools & Manufacture, 42(9), 997-1010. DOI: 10.1016/S0890-6955(02)00040-8 - Jiang, Y., Dong, B. X., Fan, J., Qiu, F., Yang, H. Y., Shu, S. L., Chang, F., Jiang, Q. C., Zhang, L. C., 2024.
Advance on rock-breaking cutter steels: A review of characteristics, failure modes, molding processes and strengthening technology , Journal of Materials Research and Technology, 31, 2328-2354. DOI: 10.1016/j.jmrt.2024.06.195 - Kessai, I., Benammar, S., Doghmane, M. Z., 2022.
Dynamic failure analysis and lifetime estimation of Tool-string in rotary drilling system under Torsional-Axial coupled vibrations , Engineering Failure Analysis, 134, 106037. DOI: 10.1016/j.engfailanal.2022.106037 - Krysiak P. et al., 2020.
Strength testing of a composite mounting frame for a multi-sensor detection system . Materials Research Proceedings, 17, 165-170. DOI: 10.21741/9781644901038-25 - Leitner, M., Vormwald, M., Remes, H., 2017.
Statistical size effect on multiaxial fatigue strength of notched steel components , International Journal of Fatigue, 104, 322-333. DOI: 10.1016/j.ijfatigue.2017.08.002 - Lindenmann, A., Uhl, M., Gwosch, T., Matthiesen, S., 2021.
The influence of human interaction on the vibration of hand-held human-machine systems – The effect of body posture, feed force, and gripping forces on the vibration of hammer drills , Applied Ergonomics, 95, 103430. DOI: 10.1016/j.apergo.2021.103430 - Liu, M., Luo, S., Shen, Y., Iin, X., 2019.
Corrosion fatigue crack propagation behavior of S135 high– strength drill pipe steel in H2S environment , Engineering Failure Analysis, 97, 493-505. DOI: 10.1016/j.engfailanal.2019.01.026 - Liu, Y., Pan, Z., Zhang, H., Jing, X., Zhou, H., Chen, Y., 2024.
Thermal-mechanical coupling in drilling high-performance CFRP: Scale-span modeling and experimental validation , Composite Structures, 331, 117903. DOI: 10.1016/j.compstruct.2024.117903 - Marković, S. et al., 2021.
Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures . Materials, 14 (15), art. 4203. DOI: 10.3390/ma14154203 - Momeni, S., Moseley, S., Ante, M., Allaart, J., 2017.
The wear of WC-Co drill bits during rotary-percussive drilling of reinforced concrete , International Journal of Refractory Metals and Hard Materials, 62, Part B, 202-209. DOI: 10.1016/j.ijrmhm.2016.08.006 - Orman, Ł.J. et al., 2022.
Analysis of Thermal Comfort in Intelligent and Traditional Buildings , Energies 15 (2022) art. 6522. DOI: 10.3390/en15186522 - Radek, M. et al., 2023.
Matching Computational Tools to User Competence Levels in Education of Engineering Data Processing . Materials ResearchProceedings, 34, 453-459. DOI: 10.21741/9781644902691-52 - Radek, N., 2009.
Determining the operationalproperties of steel beater safter electro spark deposition . Eksploatacja i Niezawodnosc, 44 (4), 10-16. - Radek, N. et al., 2019.
Technology and application of anti-graffiti coatingsystems for rolling stock , METAL 2019 - 28thInt. Conf. Metall. Mater. (2019) 1127-1132. - Radek, N. et al., 2020.
The influence of plasma cutting parameters on the geometric structure of cut surfaces . Materials Research Proceedings, 17, 132-137. DOI: 10.21741/9781644901038-20 - Radek, N. et al., 2021.
Influence of laser texturing on tribological properties of DLC coatings , Prod. Eng. Arch. 27, 119-123. DOI: 10.30657/pea.2021.27.15 - Radek, N., Antoszewski, B., 2009.
The influence of laser treatment on the properties of electro-spark deposited coatings . Kovove Materialy, 47 (1), 31-38. - Radzyminska-Lenarcik, E., Ulewicz, M., 2019.
Polymer inclusion membranes (PIMs) doped with alkyl imidazole and their application in the separation of non-ferrous metal ions . Polymers, 11 (11), art. 1780. DOI: 10.3390/polym11111780 - Raju, P.K.K., 1998.
Fatigue and Wear of Cutting Tools , Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212(7), 637-648 - Scendo, M. et al., 2012.
Purine as an effective corrosion inhibitor for stainless steel in chloride acid solutions . Corrosion Reviews, 30 (1-2), 33-45. DOI: 10.1515/CORRREV-2011-0039 - Scendo, M. et al., 2013.
Influence of laser treatment on the corrosive resistance of WC-Cu coating produced by electro spark deposition . International Journal of Electrochemical Science, 8 (7), 9264-9277. - Spasova, D., Argirov, Y., Atanasov, N., Yankova, R., 2022.
Analysis of failure causes of S135 drill pipe , Materials Today: Proceedings, 59, 1719-1725. DOI: 10.1016/j.matpr.2022.04.026 - Susmel, L., 2022.
Notches, nominal stresses, fatigue strength reduction factors and constant/variable amplitude multiaxial fatigue loading , International Journal of Fatigue, 162, 106941. DOI: 10.1016/j.ijfatigue.2022.106941 - Szczotok, A. et al., 2017.
Metallographic Study and Repeatability Analysis of γ’ Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy . Arch. Metall. Mater. 62, 595-601.https://doi.org/10.1515/amm-2017-0088">https://doi.org/10.1515/amm-2017-0088 - Uhl, M., Gauch, M., Robens, J. H., Gwosch, T., Matthiesen, S., 2022.
Analysis of the influence of feed and lateral force on productivity and hand-arm vibration in interaction with drill bit wear and concrete strength , International Journal of Industrial Ergonomics, 92, 103347. DOI: 10.1016/j.ergon.2022.103347 - Uhl, L., Lindenmann, A., Matthiesen, S.,2021.
Analysis of factors influencing the productivity of hammer drilling – user forces, human fatigue, drilling direction, and drill bit , Applied Ergonomics, 92, 103338. DOI: 10.1016/j.apergo.2020.103338 - Uhl, M., Robens, J. H., Gauch, M., Germann, R., Matthiesen, S., 2023.
Factors on vibrational harm during hammer drilling – Influences of lateral force, feed force, hammer drill and drill bit type , International Journal of Industrial Ergonomics, 94, 103418. DOI: 10.1016/j.ergon.2023.103418 - Ulewicz, R. et al., 2013. Structure and mechanical properties of fine-grained steels. Periodica Polytechnica Transportation Engineering, 41 (2), 111-115.
https://doi.org/DOI:10.3311/PPtr.7110 - Wang, H. L., Shih A. F., 2011.
Drilling and Cutting Tool Safety: A Review of Recent Advances , International Journal of Advanced Manufacturing Technology, 52, 345-354 - Wang, W., Liu, G., Li, J., Zha, C., Lian, W., 2021.
Numerical simulation study on rock-breaking process and mechanism of compound impact drilling , Energy Reports, 7, 3137-3148. DOI: 10.1016/j.egyr.2021.05.040 - Wronska, A. et al., 2019.
Effect of tool pin length on microstructure and mechanical strength of the FSW joints of Al 7075 metal sheets . Communications - Scientific Letters of the University of Žilina, 21 (3), 40-47. - Zhang, L., Wang, G., Xu, X., Xuan, S., Fan, X., Kan, Y., Yao, X., 2023.
Thermal–mechanical coupling numerical simulation and low damage analysis for drilling composite , Composite Structures, 324, 117542. DOI: 10.1016/j.compstruct.2023.117542 - Zórawski, W. et al., 2008.
Plasma-sprayed composite coatings with reduced friction coefficient . Surface and Coatings Technology, 202 (18), 4578-4582. DOI: 10.1016/j.surfcoat.2008.04.026
DOI: https://doi.org/10.2478/czoto-2024-0033 | Journal eISSN: 2657-5450
Language: English
Page range: 311 - 319
Submitted on: Dec 5, 2024
Accepted on: Dec 20, 2024
Published on: Dec 31, 2024
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2024 Zbigniew Bałaga, Michał Opydo, Agata Dudek, Barbara Lisiecka, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.