References
- Alejandrino, C., Mercante, I.T., Bovea, M.D., 2022. Combining O-LCA and O-LCC to support circular economy strategies in organizations: Methodology and case study, J Clean Prod, 336, 130365. DOI: 10.1016/j.jclepro.2022.130365
- Ali, A., Hafeez, Y., Hussain, S., Yang, S., 2020. Role of Requirement Prioritization Technique to Improve the Quality of Highly-Configurable Systems, IEEE Access, 8, 27549–27573. DOI: 10.1109/ACCESS.2020.2971382
- Borkowski, S., Ulewicz, R., Selejdak, J., Konstanciak, M., Klimecka-Tatar, D. 2012. The use of 3x3 matrix to evaluation of ribbed wire manufacturing technology, METAL 2012 - Conference Proceedings, 21st International Conference on Metallurgy and Materials, 1722–1728
- Calado, E.A., Leite, M., Silva, A., 2019. Integrating life cycle assessment (LCA) and life cycle costing (LCC) in the early phases of aircraft structural design: an elevator case study, Int J Life Cycle Assess, 24, 2091–2110, DOI: 10.1007/s11367-019-01632-8
- Chen, C.-H., Khoo, L.P., Yan, W., 2003. Evaluation of multicultural factors from elicited customer requirements for new product development, Res Eng Des, 14, 119–130, DOI: 10.1007/s00163-003-0032-6
- Czerwińska, K., Pacana, A., 2019. Analysis of the implementation of the identification system for directly marked parts - DataMatrix code, Production Engineering Archives 23, 22–26. DOI: 10.30657/pea.2019.23.04
- El Badaoui,M. Touzani, A. 2022. AHP QFD methodology for a recycled solar collector, Production Engineering Archives,28(1) 30-39.DOI: 10.30657/pea.2022.28.04
- Garcia-Ayllon, S., Hontoria, E., Munier, N., 2021. The Contribution of MCDM to SUMP: The Case of Spanish Cities during 2006–2021, Int J Environ Res Public Health, 19, 294, DOI: 10.3390/ijerph19010294
- Hemeida, M.G., Hemeida, A.M., Senjyu, T., Osheba, D., 2022. Renewable Energy Resources Technologies and Life Cycle Assessment: Review. Energies (Basel), 15, 9417. DOI: 10.3390/en15249417
- Idzikowski, A., Cierlicki, T., 2021. Economy and energy analysis in the operation of renewable energy installations - A case study, Production Engineering Archives, 27(2), 90–99
- Korzynski, M., Pacana, A., 2010. Centreless burnishing and influence of its parameters on machining effects, J Mater Process Technol, 210, 1217–1223. DOI: 10.1016/j.jmatprotec.2010.03.008
- Krynke, M., Ivanowa, T., Revenko, N., 2022. Factors, Increasing the Efficiency of Work of Maintenance, Repair and Operation Units of Industrial Enterprises, Management Systems in Production Engineering, 30(1), 91-97, DOI: 10.2478/mspe-2022-0012
- Kuzior, A., Kwilinski, A., Tkachenko, V., 2019, Sustainable development of organizations based on the combinatorial model of artificial intelligence, Entrepreneurship and Sustainability Issues, 7(2), 1353–1376; DOI: 10.9770/jesi.2019.7.2(39)
- Lagerstedt, J., Luttropp, C., Lindfors, L.-G., 2003. Functional priorities in LCA and design for environment, Int J Life Cycle Assess, 8, 160–166, DOI: 10.1007/BF02978463
- Lawor, B., Hornyak, M., 2012. SMART Goals: How The Application Of Smart Goals Can Contribute To Achievement Of Student Learning Outcomes, Developments in Business Simulation and Experiential Learning, 39, 259–267.
- Leda, P., Idzikowski, A., Piasecka, I., Bałdowska-Witos, P.,; Cierlicki, T., Zawada, M., 2023. Management of Environmental Life Cycle Impact Assessment of a Photovoltaic Power Plant on the Atmosphere, Water, and Soil Environment. Energies, 16, 4230, DOI: 10.3390/en16104230
- Lee, Chen, Lin, Li, Zhao, 2019. Developing a Quick Response Product Configuration System under Industry 4.0 Based on Customer Requirement Modelling and Optimization Method, Applied Sciences, 9, 5004, DOI: 10.3390/app9235004
- Liu, F., Dai, Y., 2022. Product Processing Quality Classification Model for Small-Sample and Imbalanced Data Environment, Comput Intell Neurosci, 2022, 1–16, DOI: 10.1155/2022/9024165
- Lucchi, E., Polo Lopez, C.S., Franco, G., 2020. A conceptual framework on the integration of solar energy systems in heritage sites and buildings, IOP Conf Ser Mater Sci Eng, 949, 012113, DOI: 10.1088/1757-899X/949/1/012113
- Markatos, D.N., Malefaki, S., Pantelakis, S.G., 2023. Sensitivity Analysis of a Hybrid MCDM Model for Sustainability Assessment—An Example from the Aviation Industry, Aerospace, 10, 385, DOI: 10.3390/aerospace10040385
- Means, P., Guggemos, A., 2015. Framework for Life Cycle Assessment (LCA) Based Environmental Decision Making During the Conceptual Design Phase for Commercial Buildings, Procedia Eng, 118, 802–812, DOI: 10.1016/j.proeng.2015.08.517
- Mushtaq, F., Farooq, M., Tirkey, A.S., Sheikh, B.A., 2023. Analytic Hierarchy Process (AHP) Based Soil Erosion Susceptibility Mapping in Northwestern Himalayas: A Case Study of Central Kashmir Province, Conservation, 3, 32–52, DOI: 10.3390/conservation3010003
- Nando, F.T., Amrina, E., Alfadhlani, 2020. Prioritizing design requirements on traditional arrow using quality function deployment, 040020, DOI: 10.1063/5.0000983
- Neramballi, A., Sakao, T., Willskytt, S., Tillman, A.-M., 2020. A design navigator to guide the transition towards environmentally benign product/service systems based on LCA results, J Clean Prod, 277, 124074, DOI: 10.1016/j.jclepro.2020.124074
- Olejarz, T., Siwiec, D., Pacana, A., 2022. Method of Qualitative–Environmental Choice of Devices Converting Green Energy, Energies (Basel), 15, 8845, DOI: 10.3390/en15238845
- Ostasz, G., Siwiec, D., Pacana, A., 2022. Universal Model to Predict Expected Direction of Products Quality Improvement, Energies (Basel), 15, DOI: 10.3390/en15051751
- Pacana, A., Siwiec, D., 2021. Universal Model to Support the Quality Improvement of Industrial Products, Materials, 14, 7872, DOI: 10.3390/ma14247872
- Pacana, A., Siwiec, D., 2022a. Method of Determining Sequence Actions of Products Improvement, Materials, 15, 6321, DOI: 10.3390/ma15186321
- Pacana, A., Siwiec, D., 2022b. Model to Predict Quality of Photovoltaic Panels Considering Customers’ Expectations, Energies (Basel), 15, 1101, DOI: 10.3390/en15031101
- Proske, M., Finkbeiner, M., 2020. Obsolescence in LCA–methodological challenges and solution approaches, Int J Life Cycle Assess, 25, 495–507, DOI: 10.1007/s11367-019-01710-x
- Putman, V.L., Paulus, P.B., 2009. Brainstorming, Brainstorming Rules and Decision Making, J Creat Behav, 43, 29–40, DOI: 10.1002/j.2162-6057.2009.tb01304.x
- Sánchez-Pantoja, N., Vidal, R., Pastor, M., 2021. EU-Funded Projects with Actual Implementation of Renewable Energies in Cities. Analysis of Their Concern for Aesthetic Impact, Energies (Basel), 14, 1627, DOI: 10.3390/en14061627
- Sánchez-Pantoja, N., Vidal, R., Pastor, M.C., 2018. Aesthetic impact of solar energy systems, Renewable and Sustainable Energy Reviews, 98, 227–238, DOI: 10.1016/j.rser.2018.09.021
- Shen, Y., Zhou, J., Pantelous, A.A., Liu, Y., Zhang, Z., 2022. A voice of the customer realtime strategy: An integrated quality function deployment approach, Comput Ind Eng, 169, 108233, DOI: 10.1016/j.cie.2022.108233
- Singh, A., Olsen, S.I., Pant, D., 2013. Importance of Life Cycle Assessment of Renewable Energy Sources, 1–11, DOI: 10.1007/978-1-4471-5364-1_1
- Siwiec, D., Bełch, P., Hajduk-Stelmachowicz, M., Pacana, A., Bednárová, L., 2022. Determinants Of Making Decisions In Improving The Quality Of Products, Scientific Papers of Silesian University of Technology. Organization and Management Series 2022, 497–507, DOI: 10.29119/1641-3466.2022.157.31
- Siwiec, D., Pacana, A., 2021a. A Pro-Environmental Method of Sample Size Determination to Predict the Quality Level of Products Considering Current Customers’ Expectations, Sustainability, 13, 5542, DOI: 10.3390/su13105542
- Siwiec, D., Pacana, A., 2021b. Model of Choice Photovoltaic Panels Considering Customers’ Expectations, Energies (Basel), 14, 5977, DOI: 10.3390/en14185977
- Siwiec, D., Pacana, A., 2021c. Model supporting development decisions by considering qualitative–environmental aspects, Sustainability (Switzerland), 13(16), 9067, DOI: 10.3390/su13169067
- Siwiec, D., Pacana, A., 2022. A New Model Supporting Stability Quality of Materials and Industrial Products, Materials 15, 4440, DOI: 10.3390/ma15134440
- Tran, N.H., Yang, S.-H., Tsai, C.Y., Yang, N.C., Chang, C.-M., 2021. Developing Transportation Livability-Related Indicators for Green Urban Road Rating System in Taiwan, Sustainability, 13, 14016, DOI: 10.3390/su132414016
- Ulewicz, R. 2018. Customer satisfaction survey in the furniture industry, Increasing the Use of Wood in the Global Bio-Economy - Proceedings of Scientific Papers, 19-29
- Ulewicz, R., Siwiec, D., Pacana, A., Tutak, M., Brodny, J., 2021. Multi-Criteria Method for the Selection of Renewable Energy Sources in the Polish Industrial Sector, Energies (Basel), 14, 2386. DOI: 10.3390/en14092386
- Ulewicz, R., Siwiec, D., Pacana, A. 2023. Sustainable Vehicle Design Considering Quality Level and Life Cycle Environmental Assessment (LCA). Energies, 16, 8122. https://doi.org/10.3390/en16248122
- Various authors, Pr.S., 2020. SimaPro database manual - Methods library, PRé Sustainability B.V. 4.15.
- Varun, Bhat, I.K., Prakash, R., 2009. LCA of renewable energy for electricity generation systems—A review, Renewable and Sustainable Energy Reviews 13, 1067–1073, DOI: 10.1016/j.rser.2008.08.004
- Ziemińska-Stolarska, A., Pietrzak, M., Zbiciński, I., 2021. Application of LCA to Determine Environmental Impact of Concentrated Photovoltaic Solar Panels—State-of-the-Art. Energies (Basel), 14, 3143, DOI: 10.3390/en14113143