Improvement Of The Production Process With The Use Of Selected Kpis
References
- Ahuja, I.P.S. and Khamba, J.S., 2008. Total Productive Maintenance: Literature Review and Directions, Int. J. Qual. Reliab. Manag., 25 (7), 709-756.
- Berlińska, J., 2013. Zwiększenie efektywności pracy maszyn i urządzeń dzięki zastosowaniu Total Productive Maintenance, Logistyka, 6, 17-23.
- Brzeziński, S., Klimecka-Tatar, D., 2016. Effect of the changes in the forming metal parameters on the value streams flow and the overall equipment effectiveness coefficient, 25th Anniversary International Conference on Metallurgy and Materials, Tanger Ltd., Ostrava, 1750-1755.
- Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions, 110 (5), 51-58.
- Domagala, M. and Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc. 5, 17-24.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
- Elevli S. and Eleveli B., 2010. Performance measurement of mining equipments by utilizing OEE. Acta Montanistica Slovaca, Slovak Republic, 15, 95-101.
- Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
- Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions 114 (10), 141-146.
- Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
- Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions 112(7), 77-82.
- Furman, J., 2014. Wdrażanie wybranych narzędzi koncepcji Lean Manufacturing w przedsiębiorstwie produkcyjnym [in:] Knosala R. (ed.): Innowacje w zarządzaniu i inżynierii produkcji, tom 1, PTZP, Opole.
- Gola A. and Świć A., 2012. Directions of Manufacturing Systems’ Evolution from the Flexiblity Level Point of View, [in:] R.Knosala (ed.) Innovations in Management and Production Engineering, PTZP, Opole, 226-238.
- Loska, A., 2013. Eksploatacyjna ocena wybranych obiektów technicznych z zastosowaniem metod taksonomicznych, Eksploat. Niezawodn., 15 (1), 1-8.
- Malindzak, D., Pacana, A. and Pacaiova, H., 2017. An effective model for the quality of logistics and improvement of environmental protection in a cement plant, Przemysł Chemiczny, 96 (9), 1958-1962.
- McKone, K.E. and Weiss, E.N., 1998. TPM: planned and autonomous maintenance: bridging the gap between practice and research, Prod. Oper. Manag., 7(4), 335-351.
- Mielczarek, K., Krynke, M., 2018. Plastic production machinery – the evaluation of effectiveness. Production Engineering Archives, 18, 42-45, DOI: 10.30657/pea.2018.18.07
- Mikler, J., 2005. Dostępność i wykorzystanie urządzeń, Inżynieria & Utrzymanie Ruchu Zakładów Przemysłowych.
- Muchiri, P. and Pintelon, L., 2008. Performance measurement using OEE: Literature review and practical application discussion. Int. J. Prod. Res., 46(13), 3517-3535.
- Oechsner, R., Pfeffer, M., Pfitzner, L., Binder, H., Muller, E. and Vonderstrass, T., 2003. From overall equipment efficiency(OEE) to overall Fab effectiveness (OFE), Mater. Sci. Semicond. Process, 5, 333–339.
- Ostapko, B., 2018. Metody zwiększania wydajności w zakładzie produkcyjnym – studium przypadku, Zeszyty Naukowe Politechniki Śląskiej, Seria: Organizacja i Zarządzanie, 118.
- Pacana, A., Bednarova, L., Liberko, I., 2014. Effect of selected production factors of the stretch film on its extensibility, Przemysł Chemiczny, 93 (7), 1139-1140.
- Pacana, A., Radoń-Cholewa, A. and Pacana, J., 2015. The study of stickiness of packaging film by Shainin method, Przemysł Chemiczny, 94 (8), 1334-1336.
- Pacana, A.; Czerwinska, K. and Bednarova, L., 2018. Discrepancies analysis of casts of diesel engine piston, Metalurgija, 57 (4), 324-326
- Rychter, A., 2005. Miejsce TPM w kształtowaniu jakości produktu. [in:] S. Borkowski (ed.), Zarządzanie jakością wyrobów i usług, PTM, Warszawa.
- Świć, A. and Gola, A., 2010. Elements of Design of Production Systems – Methodology of Machine Tool Selection in Casing-Class FMS, Management and Production Engineering Review, 1 (2), 73-81.
- Ulewicz, R., 2003. Quality Control System in Production of the Castings from Spheroid Cast Iron, Metalurgija, 42 (1),61-63.
- Walczak, M., 2015. System utrzymania ruchu czynnikiem przewagi konkurencyjnej przedsiębiorstwa, Kraków, Uniwersytet Ekonomiczny w Krakowie.
- Wielgoszewski, P., 2007. TPM - Total Productive Maintenance – czyli jak zredukować do zera liczbę wypadków, awarii i braków, Zarządzanie Jakością, 1, 25.
- Wolniak, R., 2017. Application methods for analysis car accident in industry on the example of power, Support Systems in Production Engineering, 6 (4), 34-40.
DOI: https://doi.org/10.2478/czoto-2020-0038 | Journal eISSN: 2657-5450
Language: English
Page range: 307 - 315
Submitted on: Dec 15, 2019
Accepted on: Jan 20, 2020
Published on: Apr 18, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2020 Czerwińska Karolina, Andrzej Pacana, Renata Dwornicka, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.