References
- Anouncia S. M., 2018. Digital interferometry with image processing and computational techniques for NDT of composite materials, INSIGHT, 60(12), 685-696.
- Barluenga G., Puentes J., Palomar I. et al., 2018. Methodology for monitoring Cement Based Materials at Early Age combining NDT techniques, Construction and Building Materials, 193, 373-383.
- Bernieri A., Ferrigno L., Laracca M. et al., 2018. Ultrasonic NDT on aluminum bars: An experimental performance comparison of excitation and processing techniques, MEASUREMENT, 128, 393-402.
- Chauveau D., 2018. Review of NDT and process monitoring techniques usable to produce high-quality parts by welding or additive manufacturing, Welding In The World, 62(5), 1097-1118.
- Doaei M., Tavallali M. S., 2018. Intelligent screening of electrofusion-polyethylene joints based on a thermal NDT method, infrared Physics & Technology, 90, 1-7.
- Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110, (5), 51-58.
- Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
- Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
- Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
- Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
- Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
- Gawlik, J., Kiełbus, A. and Karpisz, D., 2015. Application of an integrated database system for processing difficult materials. Solid State Phenomena, 223, 35-45.
- Guo C., Xu C., Xiao D. et al., 2019. A tool centre point calibration method of a dual-robot NDT system for semi-enclosed workpiece testing, Industrial Robot-The International Journal of Robotics Research And Application, 46(2), 202-210.
- Gurieva T., Marushin E., Mednikov A et al., 2018. NDT Status of PF1 Coil Welds, IEEE Transactions On Applied Superconductivity, 28(4).
- Hejripour F., Aidun D. K., 2017. Consumable selection for arc welding between Stainless Steel 410 and Inconel 718, Journal Of Materials Processing Technology, 245, 287-299.
- Joshaghani A., 2019. Identifying the problematic areas with structural deficiencies of pavements using non-destructive tests (NDT), International Journal of Pavement Engineering, 20(11), 1359-1369.
- Karpisz, D. and Kiełbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017.
- Krysztofik J., Manaj W., 2011. Non-destructive testing technology application in aviation, Works of the Institute of Aviation, 211, 120-129.
- Malindzak D. et al. 2017. An effective model for the quality of logistics and improvement of environmental protection in a cement plant, Przemysł Chemiczny, 96(9), 1958-1962.
- Non-destructive testing - Magnetic powder testing. Part 1: General principles. PN-EN ISO 9934-1:2017-02.
- Pacana A., Bednarova L., Liberko I. et al. 2014. Effect of selected production factors of the stretch film on its extensibility, Przemysł Chemiczny, 93(7), 1139-1140.
- Pacana A., Radon-Cholewa A., Pacana J. et al. 2015. The study of stickiness of packaging film by Shainin method, Przemysł Chemiczny, 94(8), 1334-1336.
- Pacana A., Siwiec D., Bednárová L., 2019. Analysis of the incompatibility of the product with fluorescent method, Metalurgija, 58(3-4), 337-340.
- Pawłowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
- Rentala V. K., Mylavarapu P., Gautam J. P., 2018. Issues in estimating probability of detection of NDT techniques - A model assisted approach, Ultrasonics, 87, 59-70.
- Sangoju B., Ramanjaneyulu K., Sasmal S. et al., 2019. NDT For Condition Assessment Of IDCT RC Walls And Repair Measures For Long Term Durability, Construction and Building Materials, 218, 270-283.
- Siwiec D. et al., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing, Przemysł Chemiczny, 98(10), 1594-1596.
- Skotnicka-Zasadzień B., Wolniak R., Zasadzien M. 2017. Use of quality engineering tools and methods for the analysis of production processes - case study, Proc. of the 2nd Int. Conf. on Economic and Business Management, 33, 240-245.
- Skrzypczak-Pietraszek, E., 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol., 33, 155-161.
- Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
- Son M., Kim M., 2019. Development and Validation of an NDT Based on Total Sound Signal Energy, journal Of Testing And Evaluation, 47(1), 87-103.
- Sozański L., 2012. Welded joints magnetic-particle inspection standards, Przegląd Spawalnictwa, 10, 58-60.
- Stone D. J., Alexandrov B. T., Penso J. A., 2018. Alloy Composition and Critical Temperatures in Type 410 Steel Welds, welding Journal, 97(10), 286S-300S.
- Ulewicz R., 2003. Quality Control System in Production of the Castings from Spheroid Cast Iron, Metalurgija, 42(1),61-63.
- Ulewicz R., 2018. Narzędzia jakości w praktyce. Poradnik dla biznesu, Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji, Częstochowa.
- Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. Metal 2013 Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
- Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant marten-sitic steel. Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.
- Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
- Wolniak R., 2017. Application methods for analysis car accident in industry on the example of power, Support Systems in Production Engineering, 6(4), 34-40.
- Zientek P., 2016. Non-destructive testing methods for selected elements of small power turbogenerators, Electrical Machines - Problem Notebooks, 3, 115-120.