Discussion of the Heat Flux Calculation Method During Pool Boiling on Meshed Heaters
References
- Dąbek, L., Kapjor, A., Orman, Ł.J., 2019. Distilled water and ethyl alcohol boiling heat transfer on selected meshed surfaces, Mechanics & Industry, 20, 701. DOI: 10.1051/meca/2019068.
- Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions, 110(5), 51-58.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
- Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
- Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions 114 (10), 141-146.
- Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
- Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112(7), 77-82.
- Grabowski M., Hożejowska S., Pawińska A., Poniewski M.E., Wernik J., 2018. Heat transfer coefficient identification in minichannel flow boiling with hybrid Picard-Trefftz method, Energies, 11, 1-13. DOI: 10.3390/en11082057.
- Hożejowski, L., Hożejowska, S., 2019. Trefftz method in an inverse problem of two-phase flow boiling in a minichannel, Engineering Analysis with Boundary Elements, 98, 27-34. DOI: 10.1016/j.enganabound.2018.10.001.
- Korzekwa, J., Bara, M., Pietraszek, J., Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic, International Journal of Surface Science and Engineering, 10(6), 570-584.
- Maciejewska, B., Piasecka, M., 2017. Trefftz function-based thermal solution of inverse problem in unsteady-state flow boiling heat transfer in a minichannel, International Journal of Heat and Mass Transfer, 107, 925-933. DOI: 10.1016/j.ijheatmasstransfer.2016.11.003.
- Maciejewska, B., Piasecka, M., 2017. An application of the non-continuous Trefftz method to the determination of heat transfer coefficient for flow boiling in a minichannel, Heat and Mass Transfer, 53(4), 1211-1224. DOI: 10.1007/s00231-016-1895-1.
- Nemec, P., Malcho, M., Kaduchova, K., 2017. Experimental measurement, calculation and thermal visualization condenser temperature of cooling device with a heat pipe technology, EPJ Web of Conferences, 143. DOI: 10.1051/epjconf/201714302078.
- Orzechowski, T., 2003. Wymiana ciepła przy wrzeniu na żebrach z mikropowierzchnią strukturalną, Publishing office of Kielce University of Technology, Kielce, Poland.
- Radek, N., Pietraszek, J., Szczotok, A., Broncek, J., 2017. Production and properties of electro-spark deposited coatings modified via LBM, Technical Transactions, 114 (11), 199-204. DOI: 10.4467/2353737XCT.17.201.7430.
- Radek, N., Kurp, P. and Pietraszek, J., 2019. Laser forming of steel tubes, Technical Transactions, 116 (1), 223-229. DOI: 10.4467/2353737XCT.19.015.10055.
- Rannenberg, M., Beer, H., 1980. Heat transfer by evaporation in capillary porous wire mesh structures, Letters in Heat and Mass Transfer, 7, 425-436. DOI: 10.1016/0094-4548(80)90019-3.
- Skrzypczak-Pietraszek, E., Reiss, K., Żmudzki, P., Pietraszek, J., 2018a. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS, PLoS ONE 13(8), art. e0202556.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018b. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
- Skrzypczak-Pietraszek, E., Urbańska, A., Żmudzki, P., Pietraszek, J., 2019. Elicitation with methyl jasmonate combined with cultivation in the Plantform™ temporary immersion bioreactor highly increases the accumulation of selected centellosides and phenolics in Centella asiatica (L.) Urban shoot culture. Eng. Life Sci., 19, 931-943.
- Strąk, K., Piasecka, M., Maciejewska, B., 2018. Spatial orientation as a factor in flow boiling heat transfer of cooling liquids in enhanced surface minichannels, International Journal of Heat and Mass Transfer, 117, 375-387. DOI: 10.1016/j.ijheatmasstransfer.2017.10.019.
- Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
DOI: https://doi.org/10.2478/czoto-2020-0030 | Journal eISSN: 2657-5450
Language: English
Page range: 247 - 252
Submitted on: Nov 23, 2019
Accepted on: Feb 20, 2020
Published on: Apr 18, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2020 Łukasz J. Orman, Norbert Radek, Jacek Pietraszek, Dariusz Gontarski, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.