Simulations of Safety Vales for Fluid Power Systems
References
- Baussan, E. et al., 2014.
Neutrino super beam based on a superconducting proton linac . Phys. Rev. Spec. Top.-Accel. Beams, 17, art. 031001. - Beune, A., Kuerten, J.G.M., van Heumen, M.P.C., 2012.
CFD analysis with fluid–structure interaction of opening high-pressure safety valves . Comput. Fluids, 64, 108-116. - Domagala M., 2008.
CFD analysis of pilot operated relief valve . Technical Transactions – Mechanics, z. 3-M, 23-29. - Domagala M., 2015.
Modelling of direct acting relief valve using CFD-FSI simulation . Technical Transactions – Mechanics, z. 2-M, 43-48. - Domagala M., 2016.
Lattice-Boltzman method in CFD modelling of direct acting relief valve . Technical Transactions – Mechanics, z. 4-M, 101-106. - Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a,
Simulation of Particle Erosion in a Hydraulic Valve . Mater. Res. Proc. 5, 17-24. - Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b,
Simulation of Cavitation Erosion in a Hydraulic Valve . Mater. Res. Proc. 5, 1-6. - Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017.
The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model . Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257. - Fabis-Domagala, J., 2011.
FMEA analysis of hydraulic drives using indexed color mode . Technical Transactions – Mechanics, z. 4-M1, 2011 - Fabis-Domagala J., Filo G., Momeni H., Domagala M., 2018.
Instruments of identification of hydraulic components potential failures . MATEC Web of Conferences 183, art. 03008. - Gadek-Moszczak, A., 2017.
History of stereology . Image Anal. Stereol., 36, 151-152. - Gadek-Moszczak, A., Matusiewicz, P., 2017.
Polish stereology – a historical review . Image Anal. Stereol., 36, 207-221. - Goroshko, A., Royzman, V., 2015.
Statistical methods for providing the stability of the solutions of inverse problems and their application to decrease rotor vibroactivity . Journal of Machinery Manufacture and Reliability, 44, 232-238. - Guzowski A., Sobczyk A., 2014.
Reconstruction of Hydrostatic Drive and Control System Dedicated for Small Mobile Platform . ASME – Fluid Power Systems Technology, 8th FPNI Ph.D Symposium on Fluid Power, art. V001T05A012. - Klimecka-Tatar, D., Pawłowska, G., Sozańska, M., 2015.
The effect of powder particle biencapsulation with Ni-P layer on local corrosion of bonded Nd-(Fe,Co)-B magnetic material . Arch. Metall. Mater., 60, 153-157. - Kozien, E., Kozien, M.S., 2017a.
Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies . 26th Int. Sci. Conf. Economic and Social Development – Building Resilient Society: Economic and Social Development. Varazdin Development & Entrepreneurship Agency, Varazdin, Croatia, 210-215. - Kozien, E., Kozien, A., 2017.
Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland – legal and economic perspective . 26th Int. Sci. Conf. Economic and Social Development – Building Resilient Society: Economic and Social Development. Varazdin Development & Entrepreneurship Agency, Varazdin, Croatia, 326-335. - Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018.
Tests of New Methods of Manufacturing Elements for Water Hydraulics . Mater. Res. Proc., 5, 200-205. - Lisowski E., Filo G., Rajda J., 2015.
Pressure compensation using flow forces in a multi-section proportional directional control valve . Energy Convers. Manag., 103, 1052-1064. - Lisowski E., Filo G., 2016.
CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape . Energy Convers. Manag., 123, 15-28. - Lisowski E., Filo G., Rajda J., 2018.
Analysis of flow forces in the initial phase of throttle gap opening in a proportional control valve . Flow Meas. Instrum., 59, 157-167. - Maszke, A., Dwornicka, R., Ulewicz, R., 2018,
Problems in the implementation of the lean concept at a steel works – case study . MATEC Web Conf., 183, art. 01014. - Montgomery, D.C., 2008.
Design of experiments . Wiley, New York. - Pietraszek, J., Gadek-Moszczak, A., Torunski, T., 2014.
Modeling of errors counting system for PCB soldered in the wave soldering technology . Adv. Mater. Res.-Switz., 874, 139-143. - Pietraszek, J., Skrzypczak-Pietraszek, E., 2014.
The optimization of the technological process with the fuzzy regression . Adv. Mater. Res.-Switz., 874, 151-155. - Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016.
The fuzzy Approach to assessment of ANOVA results . ICCCI 2016: Computational Collective Intelligence, Lecture Notes in Artificial Intelligence, Springer, 260–268. - Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017a.
The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling . UNCECOMP 2017, NTU of Athens, 598-604. - Pietraszek, J., Szczotok, A., Kołomycki, M., Radek, N., Kozien, E., 2017b.
Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces . Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1412-1418. - Pobedza, J., Sobczyk, A., 2013.
Modern Coating Used in High Pressure Water Hydraulic Components . Key Engineering Materials, 542, 143-155. - Pobedza, J., Sobczyk, A., 2014.
Properties of high pressure water hydraulic components with modern coatings . Adv. Mat. Res.-Switz., 849, 100-107. - Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018a.
The impact of laser processing parameters on the properties of electro-spark deposited coatings . Arch. Metall. Mater., 63, 809-816. - Radek, N., Pietraszek, J., Szczotok, A., 2018b.
Microstructure and tribological properties of esd coatings after laser processing . Mater. Res. Proc. 5, 206-209. - Scendo, M., Trela, J., Radek, N., 2014.
Influence of laser power on the corrosive resistance of WC-Cu coating . Surf. Coat. Tech., 259, 401-407. - Singh, B. et al., 2016.
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR . Eur. Phys. J. A, 52, art. 325. - Singh, B. et al., 2017.
Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0) . Phys. Rev. D. 95, 3, 25 p., art. 032003. - Skrzypczak-Pietraszek, E., Pietraszek, J., 2009.
Phenolic acids in in vitro cultures of Exacum affine Balf. f . Acta Biol. Cracov. Bot., 51, 62-62. - Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017.
HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture . Phytochem. Lett., 20, 443-448. - Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018a.
Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy . Eng. Life Sci., 18, 287-297. - Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018b.
Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS . PLoS ONE 13, art. e0202556. - Styrylska, T., Pietraszek, J., 1992.
Numerical modeling of non-steady-state temperature-fields with supplementary data . Z. Angew. Math. Mech. 72, T537-T539. - Walczak, P., Sobczyk A., 2014.
Simulation of water hydraulic control system of francis turbine . ASME – Fluid Power Systems Technology, 8th FPNI Ph.D Symposium on Fluid Power, art. V001T04A001. - Ulewicz, R., 2016.
Quality Management System operation in the woodworking industry . Int. Conf. Path Forward for wood products: a global perspective. Proc. of Sci. Papers, Zagreb, WOODEMA, 51-56. - Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013.
Process management in the cast iron foundry . Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
DOI: https://doi.org/10.2478/czoto-2019-0085 | Journal eISSN: 2657-5450
Language: English
Page range: 670 - 677
Submitted on: Nov 27, 2018
Accepted on: Jan 14, 2019
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Mariusz Domagała, Hassan Momeni, Joanna Fabiś-Domagała, Grzegorz Filo, Paweł Lempa, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.