Abstract
The deliveries of 20 added flavor constituents, total particulate matter (TPM), nicotine, ‘tar’ carbon monoxide and water in cigarette mainstream smoke were studied when filter ventilation was 0, 10%, 30%, 50% and 70%, respectively. The flavor substance test was done by addition of standard samples. The flavor constituents in cigarette smoke condensate were separated by simultaneous distillation-extraction (SDE) and capillary gas chromatography (GC). The flavor constituents were identified and determined quantitatively by gas chromatography-mass spectrometry (GC-MS) and GC. The flavors studied were methylpyrazine, furaldehyde, 5-methylfuraldehyde, benzaldehyde, 6-methyl-5-hepten-2-one, trimethylpyrazine, 2-acetylpyridine, phenylacetaldehyde, acetophenone, linalool, b-phenylethyl alcohol, isophorone, oxoisophorone, benzyl acetate, menthol, ethyl octanoate, b-damascenone, b-damascone, geranylacetone and b-ionone. The deliveries of TPM, nicotine, ‘tar’ carbon monoxide and water in mainstream smoke were determined according to International Standard methods. It was found that the flavor constituents and routine components in mainstream smoke decreased in different proportions as the filter ventilation increased. Carbon monoxide and ‘tar’ decreased more than nicotine. The flavor constituents with lower boiling points and lower molecular weights decreased more than those with higher boiling points and higher molecular weights. With the increase of filter ventilation, not only is the amount of smoke components reduced and the smoke taste weakened, but also the composition of smoke is modified and the quality of aroma changed slightly. These findings should be considered when developing low-‘tar’ cigarettes through the use of filter ventilation technology.