Abstract
A microwave generator and a closed-circuit wind tunnel were used to measure the thermal diffusivity of tobacco (Nicotianatabacum L.) stems in vivo by the unsteady-state method. A simple mathematical model for heat flow, based on Fourier's heat-conduction equation and Newton's law of cooling, was used in this study. The microwave method was found to be relatively rapid as both heating and cooling of a cylindrical stem in an air stream could be completed in approximately 30 minutes for thermal-diffusivity determinations. Thermal-diffusivity value of the tobacco stems, containing 94 % moisture and a mean stem temperature of 30°C, was found to be (1.38 ± 0.06) × 10-7 m2 s-1. The coefficient of variation for the measurements did not exceed 1.4 % as determined through the analysis of cooling curves for five different air-flow rates over the stems. This study showed that the microwave technique could be effectively used to determine both accurately and reliably the thermal diffusivity of tobacco stems in vivo.