References
- Bolibruchová, D., Richtárech, L., 2013. Effect of adding iron to the AlSi7Mg0.3 (EN AC 42 100,A356) alloy. Manufacturing Technology 13(3), 276-281.10.21062/ujep/x.2013/a/1213-2489/MT/13/3/276
- Bolibruchová, D., Richtárech, L., 2016, Possibilities of Using Al-Si-Mg Alloys with Higher Fe Content for Demanding Castings. Manufacturing Technology 16(2), 317-323.10.21062/ujep/x.2016/a/1213-2489/MT/16/2/317
- Borkowski, S., Ulewicz, R., Selejdak, J., Konstanciak, M., Klimecka-Tatar, D., 2012. The use of 3x3 matrix to evaluation of ribbed wire manufacturing technology. 21st Int. Conf. on Metallurgy and Materials. Ostrava: TANGER, 1722-1728.
- Braszczyński J., 1991, Krystalizacja odlewów. WNT Warszawa.
- Bruna, M., Sládek, A., 2016, Hot Tearing Evaluation of Al Based Alloys. Manufacturing Technology 16(2), 323-327.10.21062/ujep/x.2016/a/1213-2489/MT/16/2/323
- Chrostek, T., 2016. Thermalanalysis of aluminum bronze BA1032. Technical Sciences 19(4), 359–366.
- Cook, R., 2008. Modification of Aluminium-Silicon Foundry Alloys. London & Scandinavian Metallurgical Co Limited.
- Dudek, A., Lisiecka, B., 2017. The effect of thermal oxidation of porous and non-porous titanium alloy. Metal 2017: 26th International Conference on Metallurgy and Materials. TANGER Ltd 1234-1239.
- EN ISO 6892-1:2016. Metallic materials. Tensile testing Part 1: Method of test at room temperature.
- EN ISO6506-1:2014. Metallic materials -- Brinell hardness test Part 1: Test method.
- Fisher, D.J., Kurz, W., 1977. Coupled zones in faced/nonfaced eutectics. Solidification and casting of metals. International conference on solidification. Sheffield.
- Góral, A., Jura, J., Bouzy, E., Sztwiertnia, K., Morgiel, J., Bonarski, J., 2006. Multiscale texture and orientation relationship investigation in Al-CuAl2 eutectic alloy, Archives of Metallurgy and Materials 51, 11-14.
- Hajek, J., Kriz, A., Hrydlicka, V., 2015. The heat treatment of aluminium bronzes. Manufacturing Technology 15(1), 35-41.10.21062/ujep/x.2015/a/1213-2489/MT/15/1/35
- Hao, Y., Gao, B., Tu, G.F., Li, S.W., Hao, S.Z., Dong, C., 2011. Surface modification of Al– 20Si alloy by high current pulsed electron beam. Applied Surface Science 257, 3913–3919.10.1016/j.apsusc.2010.11.118
- Kusmierczak, S., Müller, M. Lebedev, A., 2017. Evaluation of aluminium alloy surface machined by means of abrasive-free ultrasonic finishing. In 16th International Scientific Conference: Engineering For Rural Development 24.05.2017, Latvia Univ Agriculture, Faculty Engineering 167-174.
- Lipiński, T., 2008. Modification of Al-Si alloys with the use of a homogenous modifiers. Archives of Metallurgy and Materials 53(1), 193-197.
- Lipiński, T., 2008. Influence exothermical mixtures contents Na or B on elongation and hardness AlSi12 alloy. Archives of Foundry Engineering 8(1), 81-84.
- Lipiński, T., 2010. The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier. Solid State Phenomena 163, 183-186.10.4028/www.scientific.net/SSP.163.183
- Lipiński, T., 2011. Use Properties of the AlSi9Mg Alloy with Exothermical Modifier. Manufacturing Technology 11(11), 44-49.10.21062/ujep/x.2011/a/1213-2489/MT/11/1/44
- Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Archives of Metallurgy and Materials 60(3), 2415-2419.10.1515/amm-2015-0394
- Lipiński, T., 2015. Modification of Al-11% Si Alloy with Cl – Based Modifier. Manufacturing Technology 15(4), 581-587.10.21062/ujep/x.2015/a/1213-2489/MT/15/4/581
- Lipiński, T., 2015. Influence of Surface Refinement on Microstructure of Al-Si Cast Alloys Processed by Welding Method. Manufacturing Technology 15(4), 576-581,10.21062/ujep/x.2015/a/1213-2489/MT/15/4/576
- Lipinski, T., Szabracki, P., 2013. Modification of the Hypo-Eutectic Al-Si Alloys with an Exothermic Modifier. Archives of Metallurgy and Materials 58(2), 453-458.10.2478/amm-2013-0017
- Michna, S., Lukac, I., Ocenasek, V., Koreny, R., Drapala, J., Schneider, H., Miskufova, A., 2005. Encyclopaedia of aluminium, Adin s.r.o. Presov. (in Czech).
- Mondelfo, L.F., 1976. Aluminium alloys. Structure and properties. Butter Wooths. London Boston.
- Náprstková, N., Cais, J., Stančeková, D., 2014. Influence of Alsi7Mg0.3 Alloy Modification by Sb on the Tool Wear. Manufacturing Technology 14(1), 75-7910.21062/ujep/x.2014/a/1213-2489/MT/14/1/75
- Náprstková, N., Kuśmierczak, S., Cais, J., 2013. Modification of AlSi7Mg0.3 alloy by strontium. Manufacturing Technology 13(3), 373-380.10.21062/ujep/x.2013/a/1213-2489/MT/13/3/373
- Nová, I., Machuta, J., 2013. Squeeze casting results of aluminium alloys. Manufacturing Technology 13(1), 73-79.10.21062/ujep/x.2013/a/1213-2489/MT/13/1/73
- Novák, P., Šerák, J., Vojtěch, D., Zelinková, M., Mejzlíková, L., Michalcová, A., 2011. Effect of Alloying Elements on Microstructure and Properties of Fe-Al and Fe-Al-Si Alloys Produced by Reactive Sintering. Key Engineering Materials 465, 407-410.10.4028/www.scientific.net/KEM.465.407
- Osorio, W.R., Cheung, N., Spinelli, J.E., Cruz, K.S., Garcia, A., 2008. Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy. Applied Surface Science 254, 2763–2770.10.1016/j.apsusc.2007.10.013
- Pilarczyk, W., 2015. The investigation of the structure of bulk metallic glasses before and after laser welding. Cryst. Res. Technol. 9-10, 700-704.10.1002/crat.201400438
- PN EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels. Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels.
- Raghavan, V., 2010. Al-Cu-Si (Aluminum-Copper-Silicon). J. Phase Equilib. Diffus. 31, 39–40.10.1007/s11669-009-9618-7
- Ruan, Y., Wei, B.B., 2009. Rapid solidification of undercooled Al-Cu-Si eutectic alloys. Chinese Sci. Bull. 54, 53–58.10.1007/s11434-008-0540-x
- Stasiak-Betlejewska, R., Ulewicz, R., 2016. The effectiveness of selected machinery and equipment in the woodworking joinery. Path forward for wood products: a global perspective, proceedings of scientific papers 149-156.
- Styrylska, T., Pietraszek, J., 1992. Numerical modeling of non-steady-state temperature fields with supplementary data. ZAMM-Z. Angew. Math. Mech. 72, T537-T539.
- Ulewicz, R., Jelonek, D., Mazur, M., 2016, Implementation of logic flow in planning and production control. Management and Production Engineering Review 7, 89-94.10.1515/mper-2016-0010
- Ulewicz, R., Selejdak, J. Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry. Metal 2013: 22nd International Conference on Metallurgy and Materials. TANGER Ltd 1926-1931.
- Vandersluis, E., Ravindran, C., 2018. Relationships Between Solidification Parameters in A319 Aluminum Alloy. Journal of Materials Engineering and Performance 27(3), 1109-1121.10.1007/s11665-018-3184-2
- Vaněček, D. - Sokovic, M. - Mádl, J., 2003. Selected Aspects of the Surface Integrity of Aluminium Alloy in High Speed Machining - Microhardness Variations and Surface Roughness. Journal of Mechanical Engineering - Strojniški Vestnik. 49(2), 111-115.
- Villars, P., Prince, A., Okamoto, H., 1995, Al-Cu-Si, Handbook of Ternary Alloy Phase Diagrams, ASM International, Materials Park, OH, 3, p 3331-3351.
- Vitalii, B., Dudek, A., 2017. Evaluation of composite epoxy resin applicability for concrete coatings. Composites Theory and Practice 17(4), 221-225.
- Wojnar, L., Gadek-Moszczak, A., PIETRASZEK, J., 2019. On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength. Image Analysis and Stereology 38, 63-73.10.5566/ias.2028
- Wołczyński, W., Sypien, A., Tarasek, A., Bydałek, A.W., 2017. Copper Droplets Agglomeration / Coagulation In The Conditions Similar To Industrial Ones. Archives of Metallurgy And Materials 62(1), 299-306.10.1515/amm-2017-0043