References
- Hamrol, A., Mantura, W., 2004. Quality management. Theory and practice. Zarządzanie jakością. Teoria i praktyka, Warszawa, PWN [in Polish].
- Fabis-Domagala, J., 2017. Analysis of defects and failures of hydraulic gear pumps with the use of selected qualitative methods, Tribiologia, 2/2017, 33-38.
- Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/20181830300910.1051/matecconf/201818303009
- Stock, M.E., Stone, R.B., Tumer, I.Y., 2003. Going back in time to improve design: the elemental function-failure design method. DETCʼ03 ASME 2003 Design Engineering Technical Conference, Computers and Information in Engineering Conference, Chicago, ASME.
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1
- Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4
- Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088
- Kielbus, A., Karpisz, D., 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment, 1, 234-239. DOI: 10.2478/czoto-2019-003010.2478/czoto-2019-0030
- Korzekwa, J., Skoneczny, W., Dercz, G., Bara, M. Wear mechanism of Al2O3/WS2 with PEEK/BG plastic. J. Tribol.-T. ASME 2014, vol. 136, art. 011601. DOI: 10.1115/1.402493810.1115/1.4024938
- Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Scientific Conf. Economic and Social Development. Zagreb, Varazdin, 210-215.
- Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-039410.1515/amm-2015-0394
- Maszke, A., Dwornicka, R., Ulewicz, R., 2018. Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., vol. 183, art. 01014. DOI: 10.1051/matecconf/20181830101410.1051/matecconf/201818301014
- Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11
- Skrzypczak-Pietraszek, E., Pietraszek, J., 2012. Chemical profile and seasonal variation of phenolic acid content in bastard balm (Melittis melissophyllum L., Lamiaceae). Journal of Pharmaceutical and Biomedical Analysis, 66, 154-161. DOI: 10.1016/j.jpba.2012.03.03710.1016/j.jpba.2012.03.037