References
- Augustyn, E., Kozien, M.S., 2014. A Study on Possibility to Apply Piezoelectric Actuators for Active Reduction of Torsional Beams Vibrations. Acta Physica Polonica A, 125, A164-A168.
- Bara, M., Skoneczny, W., Hajduga, M., 2009. Ceramic-graphite surface layers obtained by the duplex method on an aluminium alloy substrate. Chemical and Process Engineering, 30, 431-442.
- Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008
- Ferdek, U.; Kozien, M. S. 2013. Simulation of Application of FGM Piezoelectric Actuators for Active Reduction of Beam Vibrations. Acta Physica Polonica A, 123, 1044-1047. DOI: 10.12693/APhysPolA.123.104410.12693/APhysPolA.123.1044
- Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
- Gadek-Moszczak, A., Wojnar, L. 2009. Objective, quantitative and automatic x-ray image analysis of the bone regenerate in the ilizarov method. ECS10: The 10th European Congress of Stereology and Image Analysis, Milan, Int. Society for Stereology, 453-458.
- Korzekwa, J., Gadek-Moszczak, A., Zubko, M., 2018. Influence of the size of nanoparticles on the microstructure of oxide coatings. Materials Science, 53, 709-716. DOI: 10.1007/s11003-018-0127-x10.1007/s11003-018-0127-x
- Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Sci. Conf. Economic and Social Development - Building Resilient Society, Zagreb, Croatia, Varazdin, 210-215.
- Lipinski, T., Wach, A., 2014. Influence of outside furnace treatment on purity medium carbon steel. Metal 2014: 23rd Int. Conf. Metallurgy And Materials, Ostrava, Tanger, 738-743.
- Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017a. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017: 2nd Int. Conf. Uncertainty Quantification in Computational Sciences and Engineering, Rhodes, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.1722510.7712/120217.5395.17225
- Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N., Kozien, E., 2017b. Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces. METAL 2017: 26th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1412-1418.
- Pietraszek, J., Radek, N., Scendo, M., Staszewska-Samson, K., Osocha, P., 2018. Estimation of the quantitative uncertainty for the corrosion potential and corrosion current density. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1204-1209.
- PN-EN 13201:2016 - Road lighting
- PN-75/E-05100 Overhead power lines. Design and construction
- PN-EN 40-1:2002 Lighting columns. Terms and definitions
- PN-EN 1991-1-4 Actions on structures - Part 1-4: General actions - Wind actions
- PN-EN 1991-1-3 General actions - Snow load
- PN-EN 12767:2008: Passive safety of support structures for road equipment. Requirements, classification and test methods.
- PN-EN 40-5:2004 Lighting columns. Part 5: Requirements for steel lighting columns.
- PN-EN 40-6:2004 Lighting columns. Part 6: Requirements for aluminium lighting columns.
- PN-EN 40-7:2004 Lighting columns. Part 7: Requirements for fibre reinforced polymer composite lighting columns.
- Radek, N., Pietraszek, J., Antoszewski, B., 2014. The Average Friction Coefficient of Laser Textured Surfaces of Silicon Carbide Identified by RSM Methodology. Adv. Mat. Res.-Switz., 874, 29-34. DOI: 10.4028/www.scientific.net/AMR.874.2910.4028/www.scientific.net/AMR.874.29
- Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/12240710.24425/122407
- Skoneczny, W., Niedzwiedz, M., Bara, M., 2018. The effect of production parameters of oxide layers on their nanostructure, nanomorphology and surface free energy. Applied Sciences-Basel, 8, art. 2251. DOI: 10.3390/app8112251
- Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biol. Cracov. Bot., 51, 62-62.
- Skrzypczak-Pietraszek E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Enginnering in Life Sciences, 18, 287-297.10.1002/elsc.201800003
- Szabracki, P., Lipinski, T., 2013. Effect of Aging on the Microstructure and the Intergranular Corrosion Resistance of X2CrNiMoN25-7-4 Duplex Stainless Steel. Solid State Phenomena, 203-204, 59-62. DOI: 10.4028/www.scientific.net/SSP.203-204.5910.4028/www.scientific.net/SSP.203-204.59
- Wojnar, L., Gadek-Moszczak A., Pietraszek J., 2019. On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength. Image Analysis and Stereology, 38, 63-73. DOI: 10.5566/ias.202810.5566/ias.2028