References
- Bara, M., Niedzwiedz, M. And Skoneczny, W., 2019. Influence of anodizing parameters on surface morphology and surface-free energy of Al2O3 layers produced on EN AW-5251 alloy. Materials, 12, art. 695. DOI: 10.3390/ma1205069510.3390/12050695
- Bara, M., Skoneczny, W., Hajduga, M., 2009. Ceramic-graphite surface layers obtained by the duplex method on an aluminium alloy substrate. Chemical and Process Engineering, 30, 431-442.
- Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008
- Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/20181830300910.1051/matecconf/201818303009
- Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35
- Gądek-Moszczak A., Wojnar L., Piwowarczyk A., 2019. Comparison of selected shading correction methods. System Safety: Human – Technical Facility – Environment, 1, 819–826. DOI: 10.2478/czoto-2019-010510.2478/czoto-2019-0105
- Kmita, T., Bara, M., 2012. Surface oxide layers with an increased carbon content for applications in oil-less tribological systems. Chemical and Process Engineering-Inzynieria Chemiczna i Procesowa, 33, 479-486. DOI: 10.2478/v10176-012-0040-z10.2478/v10176-012-0040-z
- Kmita T., Skoneczny W., 2008. Tribological properties of anodic oxide coatings modified with molybdenum disulfide. Computer Systems Aided Science and Engineering Work in Transport, Mechanics and Electrical Engineering, Technical University of Radom.
- Korzekwa J., 2012. Tribological characteristics of sliding couple: Al2O3/WS2 coatings–PEEK/BG plastic. Tribologia, 43, 6, 246.
- Korzekwa J., Skoneczny W., Kaptacz S., 2009. The impact of the conditions of obtaining Al2O3/WS2 layers on their tribological properties, Logistyka, 6, 13th Int. Conf. Computer Systems Aided Science, Industry and Transport "TRANSCOMP 2009".
- Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35
- Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-039410.1515/amm-2015-0394
- Lipinski, T., 2018. The effect of the diameter and spacing between impurities on the fatigue strength coefficient of structural steel. Arch. Metall. Mater., 63, 519-524. DOI: 10.24425/11897010.24425/118970
- Lu C., Feng X., Yang J., Jia J., Yi G., Xie E., Sun Y., 2019. Influence of surface microstructure on tribological properties of PEO-PTFE coating formed on aluminum alloy, Surface & Coatings Technology 364, 127–134. DOI: 10.1016/j.surfcoat.2019.02.06410.1016/j.surfcoat.2019.02.064
- Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011
- Pietraszek, J., Dwornicka, R., Krawczyk, M., Kolomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017: 2nd Int. Conf. Uncertainty Quantification in Computational Sciences and Engineering, Rhodes, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.1722510.7712/120217.5395.17225
- Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome. Advanced Materials Research-Switzerland, 874, 145-149. DOI: 10.4028/www.scientific.net/AMR.874.14510.4028/www.scientific.net/AMR.874.145
- Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
- Skoneczny, W., Bara, M., 2007. Aluminium oxide composite layers obtained by the electrochemical method in the presence of graphite. Materials Science-Poland, 25, 1053-1062.
- Skoneczny, W., Niedzwiedz, M., Bara, M., 2018. The effect of production parameters of oxide layers on their nanostructure, nanomorphology and surface free energy. Applied Sciences-Basel, 8, art. 2251. DOI: 10.3390/app8112251
- Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
- Wang Z., Wu L., Qi Y., Cai W., Jiang Z., 2010. Self-lubricating Al2O3/PTFE composite coating formation on surface of aluminium alloy, Surface & Coatings Technology 204, 3315–3318. DOI: 10.1016/j.surfcoat.2010.03.04910.1016/j.surfcoat.2010.03.049