Have a personal or library account? Click to login
Quality Improvement of a Safety Valve with the Use of Numerical and Experimental Studies Cover

Quality Improvement of a Safety Valve with the Use of Numerical and Experimental Studies

Conference Quality Production Improvement – CQPI
Volume 1 (2019): Issue 1 (July 2019)
By: Grzegorz Filo,  Mariusz Domagała,  Paweł Lempa,  Joanna Fabiś-Domagała,  Dominik Kwiatkowski and  Hassan Momeni  
Open Access
|Oct 2019

References

  1. Beune, A., Kuerten, J.G.M., van Heumen, M.P.C., 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves, Computers & Fluids 64, 108-116, DOI:10.1016/j.compfluid.2012.05.010.10.1016/j.compfluid.2012.05.010
    Open DOISearch in Google ScholarBack to article
  2. Bjerre, M., Eriksen, J.G.I., Andreasen, A., Stegelmann, C., Mando, M., 2017. Analysis of Pressure Safety Valves for fire protection on offshore oil and gas installations, Process Safety and Env. Protection 105, 60-68, DOI: 10.1016/j.psep.2016.10.008.10.1016/j.psep.2016.10.008
    Open DOISearch in Google ScholarBack to article
  3. Dempster, W., Alshaikh, M., 2015. An Investigation of the Two Phase Flow and Force Characteristics of a Safety Valve, Procedia Engineering 130, 77-86, DOI: 10.1016/j.proeng.2015.12.177.10.1016/j.proeng.2015.12.177
    Open DOISearch in Google ScholarBack to article
  4. Dossena, V., Franchina, N., Savini, M., Marinoni, F., Cecchi, F., Bassi, F., 2017. Reynolds number effects on the performance of safety valves operating with incompressible flows, Journal of Loss Prevention in the Process Industries 49, 525-535, DOI: 10.1016/j.jlp.2017.05.020.10.1016/j.jlp.2017.05.020
    Open DOISearch in Google ScholarBack to article
  5. Dossena, V., Marinoni, F., Bassi, F., Franchina, N., Savini, M., 2013. Numerical and experimental investigation on the performance of safety valves operating with different gases, International Journal of Pressure Vessels and Piping 104, 21-29, DOI: 10.1016/j.ijpvp.2013.01.002.10.1016/j.ijpvp.2013.01.002
    Open DOISearch in Google ScholarBack to article
  6. Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133
    Open DOISearch in Google ScholarBack to article
  7. Galbally, D., Garcia, G., Hernando, J., de Dios Sanchez, J., 2015. Analysis of pressure oscillations and safety relief valve vibrations in the main steam system of a Boiling Water Reactor, Nuclear Engineering and Design 293, 258–271, DOI: 10.1016/j.nucengdes.2015.08.005.10.1016/j.nucengdes.2015.08.005
    Open DOISearch in Google ScholarBack to article
  8. Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088
    Open DOISearch in Google ScholarBack to article
  9. Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545.
    Search in Google ScholarBack to article
  10. Kozien, E., Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.
    Search in Google ScholarBack to article
  11. Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35
    Open DOISearch in Google ScholarBack to article
  12. Lisowski E., Filo G., 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Conversion and Management 123, 15-28, doi:10.1016/j.enconman.2016.06.025.10.1016/j.enconman.2016.06.025
    Open DOISearch in Google ScholarBack to article
  13. Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method, Flow Measurement and Instrumentation 53, 269–278, DOI: 10.1016/j.flowmeasinst.2016.12.009.10.1016/j.flowmeasinst.2016.12.009
    Open DOISearch in Google ScholarBack to article
  14. Manimaran, A., Hiremath, S.S., Shekhar, P., 2016. Dynamic Simulation and Validation of a Vent and Safety Valve for Cryogenic Flight Tanks, Procedia Technology 25, 1320-1334, DOI:10.1016/j.protcy.2016.08.232.10.1016/j.protcy.2016.08.232
    Open DOISearch in Google ScholarBack to article
  15. Miller, C., Bredemyer, L., 2007. Innovative safety valve selection techniques and data, Journal of Hazardous Materials 142, 685-688, doi: 10.1016/j.jhazmat.2006.06.072.10.1016/j.jhazmat.2006.06.07217011117
    Open DOISearch in Google ScholarBack to article
  16. Moncalvo, D., Friedel, L., 2010. A viscosity correction factor for shear-thinning liquid flows in safety valves, Journal of Loss Prevention in the Process Industries 23, 289-293, DOI: 10.1016/j.jlp.2009.10.008.10.1016/j.jlp.2009.10.008
    Open DOISearch in Google ScholarBack to article
  17. Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31
    Open DOISearch in Google ScholarBack to article
  18. Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
    Open DOISearch in Google ScholarBack to article
  19. Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42
    Open DOISearch in Google ScholarBack to article
  20. Radek, N., Pasieczynski, L., Makrenek, M., Dudek, A., 2018. Mechanical Properties of Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 243-247. DOI: 10.21741/9781945291814-4310.21741/9781945291814-43
    Open DOISearch in Google ScholarBack to article
  21. Scuro, N.L., Angelo, E., Angelo, G., Andrade, D.A., 2018. A CFD analysis of the flow dynamics of a directly-operated safety relief valve, Nuclear Engineering and Design 328, 321-332, DOI: 10.1016/j.nucengdes.2018.01.024.10.1016/j.nucengdes.2018.01.024
    Open DOISearch in Google ScholarBack to article
  22. Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556
    Search in Google ScholarBack to article
  23. Song, X.G., Wang, L.T., Park, Y.C., Sun, W., 2015. A Fluid-Structure Interaction Analysis of the Spring-Loaded Pressure Safety Valve during Popping Off, Procedia Engineering 130, 87-94, DOI: 10.1016/j.proeng.2015.12.178.10.1016/j.proeng.2015.12.178
    Open DOISearch in Google ScholarBack to article
  24. Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
    Search in Google ScholarBack to article
  25. Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: DOI: 10.21741/9781945291814-710.21741/9781945291814-7
    Open DOISearch in Google ScholarBack to article
DOI: https://doi.org/10.2478/cqpi-2019-0051 | Journal eISSN: 2657-8603
Journal RSS Feed
Language: English
Page range: 378 - 385
Submitted on: Apr 8, 2019
|
Accepted on: May 28, 2019
|
Published on: Oct 8, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
hydraulic system protection,
safety valve,
relief valve,
numerical modelling,
test bench experiments
Related subjects:
Business and economics,
Business management,
Business management, other,
Engineering,
Introductions and overviews,
Engineering, other,
Mechanical engineering,
Production technology,
Social sciences,
Sociology,
Sociology of science, technology, and environment

© 2019 Grzegorz Filo, Mariusz Domagała, Paweł Lempa, Joanna Fabiś-Domagała, Dominik Kwiatkowski, Hassan Momeni, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous articleVolume 1 (2019): Issue 1 (July 2019)Next article