The Impact of the Image Resolution on the Value of Measured Geometric Parameters on the Example of Ductile Iron Structure

Aneta Gądek-Moszczak; Joanna Korzekwa; Joanna Fabiś-Domagała

doi:10.2478/cqpi-2019-0047

.blurhash-client-img { display: none !important; }

The Impact of the Image Resolution on the Value of Measured Geometric Parameters on the Example of Ductile Iron Structure

Conference Quality Production Improvement – CQPI

Volume 1 (2019): Issue 1 (July 2019)

By: Aneta Gądek-Moszczak, Joanna Korzekwa and Joanna Fabiś-Domagała

Open Access

|Oct 2019

Abstract

Paper presents the influence of the image resolution on measurement geometric parameters of the objects. Employing as test images the ductile iron structure images allow to analyze the effect of resolution distortion on a model of objects with regular shape. Authors showed on the example images, how decreasing resolution of digital images distorts the value of the parameters describing the shape of the objects, its perimeter and its quantity. The analysis was performed by an automatic algorithm applying image analysis and stereological method.

References

ASTM E2567 - 14:2014 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
Search in Google Scholar Back to article
Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088
Open DOI Search in Google Scholar Back to article
Lisiecka, B., Dudek, A., 2018. The Surface Treatment of Sintered Stainless Steel. Materials Research Proceeding, 5, 148-153. DOI: 10.21741/9781945291814-2610.21741/9781945291814-26
Open DOI Search in Google Scholar Back to article
Orman, L.J., Radek, N., Broncek, J., 2018a. Sintered Mesh Layers for the Production of Efficient Phase - Change Heat Exchangers. Materials Research Proceedings, 5, 189-193. DOI: 10.21741/9781945291814-3310.21741/9781945291814-33
Open DOI Search in Google Scholar Back to article
Orman, L.J., Radek, N., Kapjor, A., 2018b. Surface Treatment Technologies for Boiling Heat Transfer Augmentation. Materials Research Proceedings, 5, 216-219. DOI: 10.21741/9781945291814-3810.21741/9781945291814-38
Open DOI Search in Google Scholar Back to article
Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31
Open DOI Search in Google Scholar Back to article
Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-1110.21741/9781945291814-11
Open DOI Search in Google Scholar Back to article
Pasieczynski, L., Radek, N., Klonica, M., Kaminski, J., Swiderski, J., 2018. Properties of BO100-AGR Clearcoat Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 225-230. DOI: 10.21741/9781945291814-4010.21741/9781945291814-40
Open DOI Search in Google Scholar Back to article
Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24
Open DOI Search in Google Scholar Back to article
Radek, N., Pietraszek, J., Antoszewski, B., 2014. The Average Friction Coefficient of Laser Textured Surfaces of Silicon Carbide Identified by RSM Methodology. Adv. Mat. Res.-Switz., 874, 29-34. DOI: 10.4028/www.scientific.net/AMR.874.2910.4028/www.scientific.net/AMR.874.29
Open DOI Search in Google Scholar Back to article
Russ, J.C., 1995. The Image Processing Handbook. CRC Press.
Search in Google Scholar Back to article
Russ, J.C., DeHoff, R.T., 2000. Practical stereology. Kluwer Academic/Plenum Publisher.10.1007/978-1-4615-1233-2
Search in Google Scholar Back to article
Ryś, J., 1970. Wstęp do metalografii ilościowej. Wydawnictwo Śląsk, Katowice, Poland.
Search in Google Scholar Back to article
Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: DOI: 10.21741/9781945291814-710.21741/9781945291814-7
Open DOI Search in Google Scholar Back to article
Underwood, E.E., 1970. Quantitative Stereology. Addison-Wesley.
Search in Google Scholar Back to article
Strzelczak, K., Dudek, A., 2018. Characteristics of Multimaterial Joints of Nickel-Based Superalloys. Materials Research Proceedings, 5, 166-171. DOI: 10.21741/9781945291814-2910.21741/9781945291814-29
Open DOI Search in Google Scholar Back to article
Wojnar, L., Gądek, A., 2006. Ocena powtarzalności wyników ilościowej oceny struktury. Archiwum Odlewnictwa, 6, 193-198. [in Polish]
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/cqpi-2019-0047 | Journal eISSN: 2657-8603

Journal RSS Feed

Language: English

Page range: 350 - 357

Submitted on: Apr 7, 2019

Accepted on: May 21, 2019

Published on: Oct 8, 2019

Published by: Quality and Production Managers Association

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

image processing,

stereology,

digital measurement

Related subjects:

Business and economics,

Business management,

Business management, other,

Engineering,

Introductions and overviews,

Engineering, other,

Mechanical engineering,

Production technology,

Social sciences,

Sociology,

Sociology of science, technology, and environment

© 2019 Aneta Gądek-Moszczak, Joanna Korzekwa, Joanna Fabiś-Domagała, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 1 (2019): Issue 1 (July 2019)