References
- Abu-Tair, A., Rigden, S., Burley, E., 1996. Testing the Bond Between Repair Materials and Concrete Substrate, ACI Materials Journal, 93(6), 553-558
- Tayeh, B., Bakar, B.H., Megat J., Megat A., Voo, Y. 2013. Evaluation of Bond Strength between Normal Concrete Substrate and Ultra High Performance Fiber Concrete as a Repair Material, Procedia Engineering, 54, 554–563. 10.1016/j.proeng.2013.03.050.
- Alghuff, A., Shihada, S., Tayeh, B., 2019. Comparative Study of Static and Response Spectrum Methods for Seismic Analysis of Regular RC Buildings, Journal of Applied Sciences.
- Al Saffar, D., Alsaad, A., Tayeh, B. 2019. Effect of Internal Curing on Behavior of High Performance Concrete: An Overview. Case Studies in Construction Materials, 10. 10.1016/j.cscm.2019.e00229.
- Blikhars’kyi, Z. Ya., Obukh, Y. (2018). Influence of the Mechanical and Corrosion Defects on the Strength of Thermally Hardened Reinforcement of 35GS Steel. Materials Science, 54. 10.1007/s11003-018-0183-2.
- Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Research of RC Columns Strengthened by Carbon FRP Under Loading, Matec Web of Conferences, 174, 1-8, DOI: 10.1051/matecconf/20181740401710.1051/matecconf/201817404017
- Blikharskyy, Z., Selejdak, J., Blikharskyy, Y., Khmil, Roman., 2019. Corrosion of Reinforce Bars in RC Constructions, System Safety: Human - Technical Facility - Environment. 1. 277-283. 10.2478/czoto-2019-0036.
- Bobalo, T., Blikharskyy, Y., Vashkevich, R., Volynets, M., 2018. Bearing capacity of RC beams reinforced with high strength rebars and steel plate. Matec Web of Conferences, 230, 02003, DOI: 10.1051/matecconf/201823002003.10.1051/matecconf/201823002003
- Brózda, K., Selejdak, J., Koteš, P., 2017. The Analysis of Beam Reinforced with FRP Bars in Bending, Procedia Engineering, 192, 64-68, DOI: 10.1016/j.proeng.2017.06.01110.1016/j.proeng.2017.06.011
- Dudek, A., Lisiecka, B., Ulewicz, R., 2017. The Effect of Alloying Method on the Structure and Properties of Sintered Stainless Steel, Archives of Metallurgy and Materials, 62(1), 281-287, DOI: 10.1515/amm-2017-004210.1515/amm-2017-0042
- Fadhil, B., Al-Rumaithi, A., Al-Sherrawi, M. 2018. Properties of Reactive Powder Concrete with Different Types of Cement. International Journal of Civil Engineering and Technology. 9. 1313-1321.
- Khmil, R., Tytarenko R., Blikharskyy, Y., Vegera, P., 2018. Development of the procedure for the estimation of reliability of reinforced concrete beams, strengthened by building up the stretched reinforcing bars under load, Eastern-European Journal of Enterprise Technologies, 5/7 (95), DOI: 10.15587/1729-4061.2018.142750.10.15587/1729-4061.2018.142750
- Kos Ž., Gotal Dmitrović, L., Klimenko, E., 2017. Developing a Model of a Strain (Deformation) of a Damaged Reinforced Concrete Pillar in Relation to a Linear Load Capacity, Technical Journal, 11(4), 150-154, (https://hrcak.srce.hr/190990)
- Krainskyi, P., Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Experimental Study of the Srengthening Effect of Reinforced Concrete Columns Jacketed Under Service Load Level, Matec Web of Conferences, 183, 1-5, DOI: 10.1051/matecconf/20181830200810.1051/matecconf/201818302008
- Krainskyi, P., Blikharskyy, Y., Khmil, R., Vegera, P., 2018. Influence of loading level on the bearing capacity of RC columns strengthened by jacketing. Matec Web of Conferences, 230, 02013, DOI: 10.1051/matecconf/201823002013.10.1051/matecconf/201823002013
- Kramarchuk, A., Ilnytskyy, B., Lytvyniak, O., Grabowski, A., 2019. The increase of seismic stability for existing industrial buildings. AIP Conference Proceedings. 2077. 020029. 10.1063/1.5091890.
- Selejdak, J., Khmil R., Blikharskyy, Z., 2018. The Influence of Simultaneous Action of the Aggressive Environment and Loading on Strength of RC Beams, Matec Web of Conference, 183, 1-6, DOI: 10.1051/matecconf/20181830200210.1051/matecconf/201818302002
- Selejdak, J., Ulewicz, R., Ingaldi, M., 2014. The Evaluation of the Use of a Device for Producing Metal Elements Applied in Civil Engineering, 23rd International Conference on Metallurgy and Materials, Ostrava, Tanger, 1882-1888
- Sobol, K., Blikharskyy, Z., Petrovska, N., Terly`a, V., 2014. Analysis of Structure Formation Peculiarities during Hydration of Oil-Well Cement with Zeolitic Tuff and Metakaolin Additives, Chemistry & Chemical Technology 8(4), 461-465 DOI: 10.23939/chcht08.04.46110.23939/chcht08.04.461
- Vegera, P., Vashkevych, R., Blikharskyy, Z., 2018. Fracture Toughness of RC Beams With Different Shear Span, Matec Web of Conferences, 174, 1-8, DOI: 10.1051/matecconf/20181740202110.1051/matecconf/201817402021
- Yang, M., Zhou, J., Zhang, H., Liao, L., Zhao, R., 2018. Magnetic Memory Detection of Rebar Corrosion in Concrete, Journal of Building Materials. 21. 345-350. DOI: 10.3969/j.issn.1007-9629.2018.02.028.10.3969/j.issn.1007-9629.2018.02.028
- Zhang, Q., Mol’kov, Y.V., Sobko, Y.M., Blikhars’kyi, Y.Z., Khmil, R.E., 2015. Specific Fracture Energy of Thermally Hardened Reinforcement, Materials Science, 50(6), 824-829.