References
- ASM Handbook. 2004. Metalography and Microstructures. Volume 9. Materials Park, Ohio, USA.
- Barhoumi. H. et al. 2015. Influence of heat treatment on the microstructures and mechanical properties of squeeze cast AlSi9Cu3 alloys. International Journal of Microstructure and Materials Properties. 10(5-6), 472-487. https://doi.org/10.1504/IJMMP.2015.074999
- Badgayan, N. 2013. Investigation of effects of various alloying additions on properties of Al-Si casting alloy and analysis of iron as impurity in Al-Si casting alloy. International Journal of Engineering Research & Technology. 2(9), 289-299.
- Das, K. S., Gren, J. A. 2010. Aluminum Industry and Climate Change-Assessment and Responses. JOM - the journal of the Minerals, Metals and Materials Society, 62(2), 27-31.
- Fabrizi, A., Ferraro, S., Timelli, G. 2013. The influence of Sr, Mg and Cu addition on the microstructural properties of a secondary AlSi9Cu3(Fe) die casting alloy. Materials Characterization. 85, 13-25. https://doi.org/10.1016/j.matchar.2013.08.01210.1016/j.matchar.2013.08.012
- Fabrizi A. et all. 2015. Evolution of Fe-rich compounds in a secondary Al-Si-Cu alloy: Influence of cooling rate. International Journal of Materials Research. 106(7), 719-724. https://doi.org/10.3139/146.11123810.3139/146.111238
- Farkašová, M., Tillová, E., Chalupová, M. 2013. Modification of Al-Si-Cu cast alloy. FME Transactions, New series, 41(3), 210-215.
- Hurtalová, L., Tillová, E., Chalupová, M. 2014a. The Study of Iron Intermetallic Phases Morphology with Applying Deep Etching in Secondary Al-Si Alloys. Materials Science Forum. 782, 359-364. https://doi.org/10.4028/www.scientific.net/MSF.782.35910.4028/www.scientific.net/MSF.782.359
- Hurtalová, L., Tillová, E., Chalupová, M. 2014b. Optimalization of Eutectic Si Particles Morphology in Secondary Al-Si Cast Alloys after Different Heat Treatment. Advanced Materials Research. 1025-1026, 349-354. https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.34910.4028/www.scientific.net/AMR.1025-1026.349
- Kuchariková, L., Tillová, E., Bokůvka, O., 2016a. Recycling and properties of recycled aluminium alloys used in the transportation industry. Transport problems. 11(2), 117-122. DOI: 10.20858/tp.2016.11.2.1110.20858/tp.2016.11.2.11
- Kuchariková, L., Tillová, E., Chalupová, M., 2016b. The Si particles morphology in hypoeutectic Al-Si casts. Materials Today proceedings. 2(4), 1031-1036. https://doi.org/10.1016/j.matpr.2016.03.04210.1016/j.matpr.2016.03.042
- Li, Z. et al. 2017. Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy. Materials Science and Engineering A. 689, 286-297. https://doi.org/10.1016/j.msea.2017.02.04110.1016/j.msea.2017.02.041
- Manente, A., Timelli, G. 2011. Optimizing the heat treatment process of cast aluminium alloys. Recent Trends in Processing and Degradation of Aluminium Alloys, Zaki Ahmad, IntechOpen, DOI: 10.5772/2165910.5772/21659
- Sága, M., Kopas, P., Uhríčik, M. 2012. Modeling and Experimental Analysis of the Aluminium Alloy Fatigue Damage in the case of Bending - Torsion Loading. Procedia Engineering. 48, 599-606. https://doi.org/10.1016/j.proeng.2012.09.55910.1016/j.proeng.2012.09.559
- Samuel, E., Samuel, A.M., Doty, H.W., Valtierra, S. Samuel, F.H. 2014. Intermetallic phases in Al-Si based cast alloys: new perspective. International Journal of Cast Metals Research, 27(2), 107-114. https://doi.org/10.1179/1743133613Y.000000008310.1179/1743133613Y.0000000083
- Samuel, A.M., Samuel, F.H., Doty, H.W., Valtierra, S. 2018. Beta Al5FeSi phase platelets-porosity formation relationship in A319.2 type alloys. International Journal of Metalcasting 12(1), 55-70. https://doi.org/10.1007/s40962-017-0136-910.1007/s40962-017-0136-9
- Shaha, S.K. et al. 2016. Effect of Cr, Ti, V, and Zr micro-additions on microstructure and mechanical properties of the Al-Si-Cu-Mg cast alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47(5), 2396-2409. https://doi.org/10.1007/s11661-016-3365-210.1007/s11661-016-3365-2
- Shabsestari, S.G. 2004. The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys. Mater. Sci. Eng. A, 383, 289-298. https://doi.org/10.1016/j.msea.2004.06.02210.1016/j.msea.2004.06.022
- Schlesinger, M. 2007. Aluminum recycling. Boca Raton, FL. CRC Press, Taylor & Francis Group.
- Taylor, J. A. 2004. The effect of iron in Al-Si casting alloys. 35th Australian Foundry Institute National Conference, Adelaide, South Australia, 148-157.
- Taylor, J. A. 2012. Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Materials Science, 1, 19-33. https://doi.org/10.1016/j.mspro.2012.06.00410.1016/j.mspro.2012.06.004
- Tillová, E., Chalupová, M. 2009. Structural analysis of Al-Si alloys, first ed., EDIS, Žilina, Slovakia.
- Tillová, E., Chalupová, M., Hurtalová, L. 2011a. Evolution of phases in a recycled Al-Si cast alloy during solution treatment. Chapter 21: The scaning Electron Microscopy. Dr. Viacheslav Kazmiruk, pp. 411 - 438, INTECH. DOI: 10.5772/3454210.5772/34542
- Tillová, E., Chalupová, M., Hurtalová, L., Ďuriníková, E. 2011b. Quality control of microstructure in recycled Al-Si cast alloys. Manufacturing Technology, 11, 70-76.
- Tillová, E., Chalupová, M. 2014. Unconventional Metallographic Methods for the Structural Characterization of Laser Hardened Al-Zn-Si Cast Alloy. Materials Science Forum. 782, 369-372. https://doi.org/10.4028/www.scientific.net/MSF.782.36910.4028/www.scientific.net/MSF.782.369
- VDS. 2000. Aluminium Recycling in Europe - the Road to High Quality Products. Aluminium Verlag, Düsseldorf, Germany. https://www.european-aluminium.eu/
- Závodská, D., Tillová, E., Guagliano, M., Kuchariková, L., Chalupová, M. 2017. Fatigue resistance of self-hardening aluminium cast alloy. Mater. Today: Proceedings. 4, 6001-6006. https://doi.org/10.1016/j.prostr.2018.12.317
- Wang, B. 2014. Alcoa Unveils Next-Generation Aluminum Materials Through Breakthrough Manufacturing Technology. Alcoa, Drucker Worldwide.