References
- 1. Leinfelder KF. An evaluation of casting alloys used for restorative procedures. J Am Dent Assoc. 1997:37-45.
- 2. Wylie ChM, Shelton RM, Fleming GJP, Davenport AJ. Corrosion of nickel-based dental casting alloys. Dent Mater. 2007:714-23.
- 3. Yilmaz H, Dinçer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent. 1999:215-22.
- 4. Palaskar J, Nadgir DV, Shah I. Effect of Recasting of Nickel: Chromium Alloy on its Castability. J Indian Prosthodont Soc. 2010:160-4.
- 5. Walczak M, Beer K, Surowska B, Borowicz J. The issue of using remelted CoCrMo alloys in dental prosthetics. Arch Civ Mech Eng. 2012:171-7.
- 6. Walczak M. Influence of the selected technological processes on durability of metal-ceramic systems used in dental prosthetics. Lublin: Published by Lublin University of Technology; 2014:120-2.
- 7. Walczak M, Pieniak D, Niewczas AM. Effect of recasting on the useful properties CoCrMoW alloy. Eksploatacja i Niezawodnosc – Maintenance and Reliability. 2014: 330-6.
- 8. Reisbick MH, Brantley WA. Mechanical property and micro-structural variations for recast low-gold alloy. Int J Prosthodont. 1995:346-50.
- 9. Bauer J, Cella S, Pinto MM, Costa JF, Reis A, Loguercio AD. The use of recycled metal in dentistry: Evaluation of mechanical properties of titanium waste recasting. Resour Conserv Recy. 2010:1312-26.
- 10. Peraire M, Martinez-Gomis J, Anglada JM, Bizar J, Salsench J, Gil FJ. Effects of Recasting on the Chemical Composition, Microstructure, Microhardness, and Ion Release of 3 Dental Casting Alloys and Titanium. Int J Prosthodont. 2007:286-8.
- 11. Al-Ali AA. Evaluation of Macrohardness of Recasted Cobalt– Chromium Alloy. Al-Rafidain Dent J. 2007:111-7.
- 12. Ozyegin LS, Tuncer R, Avci E. Hardness, Behavior and Metal Surface Evaluation of Recasting Non-Precious Dental Alloys. Key Eng Mater. 2007:1425-8.
- 13. Horasawa N, Marek M. The effect of recasting on corrosion of a silver-palladium alloy. Dent Mater. 2004:352-7.
- 14. Al-Hiyasat AS, Darmani H. The effects of recasting on the cytotoxicity of base metal alloys. J Prosthet Dent. 2005:158-63.
- 15. Yavuz T, Acar A, Akman S, Ozturk AN. Effect of Surface Treatment on Elemental Composition of Recast NiCr Alloy. Mater Sci Appl. 2012:163-7.
- 16. Ucar Y, Aksahin Z, Kurtoglu C. Metal ceramic bond after multiple casting of base metal alloy. J Prosthet Dent. 2009:165-71.
- 17. ISO 9693:2002, Metal-ceramic dental restorative systems. Geneva: International Organisation for Standardization; 2002.
- 18. Bauer JRO, Loguercio AD, Reis A, Filho LER. Microhardness of Ni-Cr alloys under different casting conditions. Braz Oral Res. 2006;20:40-6.
- 19. Anusavice KJ. Phillips’ Science of Dental Materials. 10th ed. Philadelphia: WB Saunders Company; 1996:457-63.
- 20. Presswood RG. Multiple recast of a nickel-chromium-beryllium alloy. J Prosthet Dent. 1983:198-9.
- 21. Palaskar J, Nadgir DV, Shah I. Effect of recasting of Nickel-Chromium alloy on its Hardness. Int J Dent Clin. 2010:8-11.
- 22. Prabhu R, Geetha Prabhu KR, Ilango T. Dental prosthesis: An evaluation on mechanical properties of recast base metal alloys. J Clin Diagn Res. 2011:1682-5.
- 23. Madhav VNV, Padmanabhan TV, Subramnian R. Evaluation of flexural bond strength of porcelain to used nickel-chromium alloy in various percentages. Indian J Dent Res. 2012:11-4.
- 24. Madani AS, Rokni SR, Mohammadi A, Bahrami M. The Effect of Recasting on Bond Strength between Porcelain and Base-Metal Alloys. J Prosthodont. 2011:190-4.