References
- R. D. ABDULLAH, A. AL-DAHAWI, and H. H. ZGHAIR, “Mechanical Characteristics and Self-Monitoring Technique of Smart Cementitious Mixtures with Carbon Fiber and Graphite Powder as Hybrid Functional Additives,” Engineering and Technology Journal, vol. 40, no. 11, pp. 1537-1547, 2022, doi: 10.30684/etj.2022.134097.1220.
- A. AL-DAHAWI, O. ÖZTÜRK, F. EMAMI, G. YILDIRIM, and M. ŞAHMARAN, “Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials,” Construction and Building Materials, vol. 104, pp. 160-168, 2016, doi: http://dx.doi.org/10.1016/j.conbuildmat.2015.12.072.
- R. D. ABDULLAH, A. M. AL-DAHAWI, and H. H. ZGHAIR, “Mechanical and self-sensing properties of cementitious composites with hybrid carbon particles/fibers as functional fillers,” presented at the 4th International Scientific Conference of Engineering Sciences and Advances Technologies, 2023.
- Y. WANG, S. SUN, and L. ZHANG, “Self-sensing cementitious composites incorporating hybrid NGPs/CNTs/NCBs for structural health monitoring,” Sensors and Actuators A: Physical, vol. 357, 2023, doi: https://doi.org/10.1016/j.sna.2023.114365.
- F. MUSSA, A. AL-DAHAWI, Q. S. BANYHUSSAN, M. R. BAANOON, and M. A. SHALASH, “Carbon Fiber-Reinforced Asphalt Concrete: An Investigation of Some Electrical and Mechanical Properties,” IOP Conference Series: Materials Science and Engineering, vol. 737, p. 012122, 2020, doi: 10.1088/1757-899X/737/1/012122.
- A. M. A.-D. AYAD K. MOHAMMED, QAIS S. BANYHUSSAN, “Effect of adding additional Carbon Fiber on Piezoresistive Properties of Fiber Reinforced Concrete Pavements under Impact Load,” Engineering and Technology Journal, vol. 39, no. 12, pp. 1771-1780, 2021, doi: http://doi.org/10.30684/etj.v39i12.1942.
- D. GHADHBAN, H. H. JONI, and A. M. AL-DAHAWI, “Carbon Fiber-Based Cementitious Composites for Traffic Detection and Weighing In Motion,” Engineering and Technology Journal, vol. 39, no. 8, pp. 1250-1256, 2021, doi: 10.30684/etj.v39i8.1875.
- I. T. HAMEED and A. AL-DAHAWI, “Electro-mechanical Properties of Functional Fiber-Based Rigid Pavement under Various Loads Applied on a Large-Scale in-Situ Section,” E3S Web of Conferences, vol. 427, p. 03033, 2023, doi: https://doi.org/10.1051/e3sconf/202342703033.
- F. NANNI, B. L. MAYORAL, F. MADAU, G. MONTESPERELLI, and T. MCNALLY, “Effect of MWCNT alignment on mechanical and self-monitoring properties of extruded PET–MWCNT nanocomposites,” Composites Science and Technology, vol. 72, no. 10, pp. 1140-1146, 2012, doi: http://dx.doi.org/10.1016/j.compscitech.2012.03.015.
- B. HAN et al., “Smart concretes and structures: A review,” Journal of Intelligent Material Systems and Structures, vol. 26, no. 11, pp. 1303-1345, 2015, doi: https://doi.org/10.1177/1045389X15586452.
- A. D’ALESSANDRO, M. RALLINI, F. UBERTINI, A. L. MATERAZZI, and J. M. KENNY, “Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications,” Cement and Concrete Composites, vol. 65, pp. 200-213, 2016, doi: http://dx.doi.org/10.1016/j.cemconcomp.2015.11.001.
- Z. BEKZHANOVA, S. A. MEMON, and J. R. KIM, “Self-Sensing Cementitious Composites: Review and Perspective,” Nanomaterials (Basel), vol. 11, no. 9, Sep 10 2021, doi: https://doi.org/10.3390/nano11092355.
- D. WANG, S. DONG, X. WANG, A. ASHOUR, X. LV, and B. HAN, “Investigating the compatibility of nickel coated carbon nanotubes and cementitious composites through experimental evidence and theoretical calculations,” Construction and Building Materials, vol. 300, 2021, doi: 10.1016/j.conbuildmat.2021.124340.
- X. YU and E. KWON, “A carbon nanotube/cement composite with piezoresistive properties,” Smart Materials and Structures, vol. 18, no. 5, p. 055010, 2009/03/30 2009, doi: 10.1088/0964-1726/18/5/055010.
- B. HAN, X. YU, and E. KWON, “A self-sensing carbon nanotube/cement composite for traffic monitoring,” Nanotechnology, vol. 20, no. 44, 2009, doi: 10.1088/0957-4484/20/44/445501.
- J. SUCHORZEWSKI, M. PRIETO, and U. MUELLER, “An experimental study of self-sensing concrete enhanced with multi-wall carbon nanotubes in wedge splitting test and DIC,” Construction and Building Materials, vol. 262, 2020, doi: https://doi.org/10.1016/j.conbuildmat.2020.120871.
- M. J. JEONG, “Effects of Carbon Nanotubes on Ultra-High Performance Concrete for Multi-Functional Applications,” 2020.
- M. O. MOHSEN, M. S. AL ANSARI, R. TAHA, N. AL NUAIMI, and A. A. TAQA, “Carbon Nanotube Effect on the Ductility, Flexural Strength, and Permeability of Concrete,” Journal of Nanomaterials, vol. 2019, pp. 1-11, 2019, doi: 10.1155/2019/6490984.
- X. YAO, G. HUANG, M. WANG, and X. DONG, “Mechanical Properties and Microstructure of PVA Fiber Reinforced Cemented Soil,” KSCE Journal of Civil Engineering, vol. 25, no. 2, pp. 482-491, 2020, doi: https://doi.org/10.1007/s12205-020-0998-x.
- A. DEHGHANI and F. ASLANI, “Piezoelectric behaviour of hybrid engineered cementitious composites containing shape-memory alloy, steel, and carbon fibres under compressive stress cycles,” Construction and Building Materials, vol. 273, 2021, doi: https://doi.org/10.1016/j.conbuildmat.2020.121671.
- A. HABIB and M. ALAM, “Mechanical Properties of Synthetic Fibers Reinforced Mortars,” International Journal of Scientific and Engineering Research vol. 4, no. 4, 2013.
- S. P. YAP, U. J. ALENGARAM, and M. Z. JUMAAT, “Enhancement of mechanical properties in polypropylene– and nylon–fibre reinforced oil palm shell concrete,” Materials & Design, vol. 49, pp. 1034-1041, 2013/08/01/2013, doi: https://doi.org/10.1016/j.matdes.2013.02.070.
- L. FERNANDO, K. PEMASIRI, and B. DASSANAYAKE, “Combined effects of rice husk ash and nylon fiber on engineering properties of cement mortar,” SN Applied Sciences, vol. 2, no. 3, 2020, doi: 10.1007/s42452-020-2198-1.
- G. YILDIRIM, O. ÖZTÜRK, A. AL-DAHAWI, A. AFŞIN ULU, and M. ŞAHMARAN, “Self-sensing capability of Engineered Cementitious Composites: Effects of aging and loading conditions,” Construction and Building Materials, vol. 231, 2020, doi: https://doi.org/10.1016/j.conbuildmat.2019.117132.
- R. ABDULLAH, A. AL-DAHAWI, and H. ZGHAIR, “Mechanical Characteristics and Self-Monitoring Technique of Smart Cementitious Mixtures with Carbon Fiber and Graphite Powder as Hybrid Functional Additives,” Engineering and Technology Journal, vol. 40, no. 11, pp. 1537-1547, 2022, doi: http://doi.org/10.30684/etj.2022.134097.1220.
- R. D. ABDULLAH, “Mechanical and Self-Sensing Properties of Cementitious Pavement Composites Enhanced with Hybrid Electrically Conductive Materials,” University of Technology, 2022.
- A. M. AL-DAHAWI, R. D. ABDULLAH, and H. H. JONI, “An investigation of self-sensing and mechanical properties of smart engineered cementitious composites reinforced with functional materials,” Open Engineering, vol. 14, no. 1, 2024, doi: https://doi.org/10.1515/eng-2022-0568.
- A. M. AL-DAHAWI, “Effect of curing age on the self-sensing behavior of carbon-based engineered cementitious composites (ECC) under monotonic flexural loading scenario,” MATEC Web of Conferences, vol. 162, 2018, doi: https://doi.org/10.1051/matecconf/201816201034.
- M. H. SARWARY et al., “Self-Sensing of Flexural Damage in Large-Scale Steel-Reinforced Mortar Beams,” ACI Materials Journal, vol. 116, no. 4, 2019, doi: https://doi.org/10.14359/51715581.
- M. ŞAHMARAN and V. C. LI, “Durability of mechanically loaded engineered cementitious composites under highly alkaline environments,” Cement and Concrete Composites, vol. 30, no. 2, pp. 72-81, 2008, doi: https://doi.org/10.1016/j.cemconcomp.2007.09.004.
- M. SAHMARAN, G. YILDIRIM, and T. K. ERDEM, “Self-healing capability of cementitious composites incorporating different supplementary cementitious materials,” Cement and Concrete Composites, vol. 35, no. 1, pp. 89-101, 2013, doi: https://doi.org/10.1016/j.cemconcomp.2012.08.013.
- ASTM-C348–02, “Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars,” Annual Book of ASTM Standards, vol. 14, 2002.
- ASTM-C307−03, “Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings1,” ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States 2012, doi: https://doi.org/10.1520/c0307-03r12.
- A. AL-DAHAWI et al., “Electrical percolation threshold of cementitious composites possessing self-sensing functionality incorporating different carbon-based materials,” Smart Materials and Structures, vol. 25, no. 10, 2016, doi: http://dx.doi.org/10.1088/0964-1726/25/10/105005.
- A. AL-DAHAWI, G. YILDIRIM, O. ÖZTÜRK, and M. ŞAHMARAN, “”Assessment of self-sensing capability of Engineered Cementitious Composites within the elastic and plastic ranges of cyclic flexural loading”,” Construction and Building Materials, vol. 145, pp. 1-10, 2017, doi: https://doi.org/10.1016/j.conbuildmat.2017.03.236.
- S. WEN and D. D. L. Chung, “”Piezoresistivity in continuous carbon fiber cement-matrix composite”,” Cement and Concrete Research/pergamon, p. 5, 1999.
- A. HAWREEN, J. A. BOGAS, and A. P. S. DIAS, “On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes,” Construction and Building Materials, vol. 168, pp. 459-470, 2018/04/20/ 2018, doi: https://doi.org/10.1016/j.conbuildmat.2018.02.146.
- A. HAWREEN, J. A. BOGAS, and R. KURDA, “Mechanical Characterization of Concrete Reinforced with Different Types of Carbon Nanotubes,” Arabian Journal for Science and Engineering, vol. 44, no. 10, pp. 8361-8376, 2019/10/01 2019, doi: 10.1007/s13369-019-04096-y.
- A. SEDAGHATDOOST and K. BEHFARNIA, “Mechanical properties of Portland cement mortar containing multi-walled carbon nanotubes at elevated temperatures,” Construction and Building Materials, vol. 176, pp. 482-489, 2018/07/10/ 2018, doi: https://doi.org/10.1016/j.conbuildmat.2018.05.095.
- F. NAEEM, H. K. LEE, H. K. KIM, and I. W. NAM, “Flexural stress and crack sensing capabilities of MWNT/cement composites,” Composite Structures, vol. 175, pp. 86-100, 2017/09/01/ 2017, doi: https://doi.org/10.1016/j.compstruct.2017.04.078.
- M. M. SADIQ, P. SOROUSHIAN, M. G. BAKKER, and A. M. BALACHANDRA, “Ultra-high-performance cementitious composites with enhanced mechanical and durability characteristics,” SN Applied Sciences, vol. 3, no. 6, 2021, doi: 10.1007/s42452-021-04628-y.
- F. SANCHEZ and K. SOBOLEV, “Nanotechnology in concrete – A review,” Construction and Building Materials, vol. 24, no. 11, pp. 2060-2071, 2010/11/01/ 2010, doi: https://doi.org/10.1016/j.conbuildmat.2010.03.014.
- P. A. DANOGLIDIS, M. S. KONSTA-GDOUTOS, and E. E. GDOUTOS, “Residual Strength and Toughness of Nano and Micro Scale Fiber Reinforced Cementitious Composites,” in Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics, Cham, E. Gdoutos and M. Konsta-Gdoutos, Eds., 2020// 2020: Springer International Publishing, pp. 58-63.
- S. KHAN, A. ALI, T. BIBI, and F. WADOOD, “Improving the durability and mechanical performance of self-compacting mortar utilizing natural and synthetic fibers,” Innovative Infrastructure Solutions, vol. 9, no. 8, p. 329, 2024/07/30 2024, doi: 10.1007/s41062-024-01646-8.
- D.-Y. YOO, S. KIM, and S. H. LEE, “Self-sensing capability of ultra-high-performance concrete containing steel fibers and carbon nanotubes under tension,” Sensors and Actuators A: Physical, vol. 276, pp. 125-136, 2018, doi: https://doi.org/10.1016/j.sna.2018.04.009.
- S. H. LEE, S. KIM, and D.-Y. YOO, “Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete,” Construction and Building Materials, vol. 185, pp. 530-544, 2018, doi: 10.1016/j.conbuildmat.2018.07.071.
- F. REZA, G. B. BATSON, J. A. YAMAMURO, and J. S. AND LEE, “Resistance Changes during Compression of Carbon Fiber Cement Composites,” Materials in Civil Engineering, vol. 15, no. 5, 2003, doi: https://doi.org/10.1061/(ASCE)0899-1561(2003)15:5(476).
- D. WANG, S. WANG, D. CHUNG, and J. CHUNG, “Comparison of the Electrical Resistance and Potential Techniques for the Self-sensing of Damage in Carbon Fiber Polymer-Matrix Composites,” Journal of Intelligent Material Systems, vol. 17, 10/01 2006, doi: 10.1177/1045389X06060218.
- T. J. CHU, R. E. ROBERTSON, H. NAJM, and A. E. NAAMAN, “Effects of poly(vinyl alcohol) on fiber cement interfaces. Part II: Microstructures,” Advanced Cement Based Materials, vol. 1, no. 3, pp. 122-130, 1994/03/01/ 1994, doi: https://doi.org/10.1016/1065-7355(94)90043-4.
- Y.-W. CHAN and S.-H. CHU, “Effect of silica fume on steel fiber bond characteristics in reactive powder concrete,” Cement and Concrete Research, vol. 34, no. 7, pp. 1167-1172, 2004/07/01/ 2004, doi: https://doi.org/10.1016/j.cemconres.2003.12.023.
- M. AL-BAHRANI, “The Manufacture and Testing of Self-Sensing CNTs Nanocomposites for Damage Detecting Applications “ PHD, School of Engineering, University of Plymouth, PEARL, 2019.
- B. HAN, S. DING, and X. YU, “Intrinsic self-sensing concrete and structures: A review,” Measurement, vol. 59, pp. 110-128, 2015, doi: https://doi.org/10.1016/j.measurement.2014.09.048.
- T.-C. HOU and J. LYNCH, “Conductivity-based strain monitoring and damage characterization of fiber reinforced cementitious structural components,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 5765, 05/01 2005, doi: 10.1117/12.599955.
- Z. J. ZHOU and Z. F. YANG, “Study on the smart property of carbon coated nylon fiber-reinforced concrete composites,” Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, vol. 29, pp. 192-195, 04/01 2001.
- I. PAEGLE, “Characterization and modeling of fiber reinforced concrete for structural applications in beams and plates,” PhD, Department of Civil Engineerin, Technical University of Denmark, 2015.
- V. LIN, M. LI, J. LYNCH, and V. LI, “Mechanical and Electrical Characterization of Self-Sensing Carbon Black ECC,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 7983, 03/01 2011, doi: 10.1117/12.880178.
- M. SAAFI, “Wireless and embedded carbon nanotube networks for damage detection in concrete structures,” Nanotechnology, vol. 20, p. 395502, 10/01 2009, doi: 10.1088/0957-4484/20/39/395502.
- I. F. AL-MULLA, A. S. AL-AMEERI, and T. S. AL-ATTAR, “CREEP Coefficient and Specific Creep of Engineered Cementitious Composite -Bendable Concrete,” Civil and Environmental Engineering, vol. 20, no. 1, pp. 377-386, 2024, doi: 10.2478/cee-2024-0029.
- M. J. TAHER, T. S. AL-ATTAR, and A. S. AL-ADILI, “Compatibility and Mechanical Performance of High-Strength Self-Compacting Concrete Produced with Recycled Glass Powder,” Civil and Environmental Engineering, vol. 20, no. 2, pp. 1107-1119, 2024, doi: 10.2478/cee-2024-0080.