References
- Cement Concrete & Aggregates Australia, “Use of Recycled Aggregates in Construction,” May 2008.
- I. GULL, “Testing of Strength of Recycled Waste Concrete and its Applicability,” Journal Construction Engineering and Management, Vol. 137, No. 1, PP. 1-5, 2011.
- N. D. OIKONOMOU, “Recycled Concrete Aggregates,” Cement and Concrete Composites, Vol. 27, No. 2, PP. 315-318, 2005.
- Y. DOSHO, “Application of Recycled Aggregate Concrete for Structural Concrete: A Recycling System for Concrete Waste,” International Symposium on Sustainable Development of Cement, concrete and concrete structures, Toronto, Canada, 2005.
- KHALAF, F.M. et al., “Recycling of Demolished Masonry Rubble as Coarse Aggregate in Concrete”: review.’ ASCE J Mater Civil Eng. 331–340, 2004.
- CRENTSIL SAGOE, K.K., BROWN T., AND TAYLOR A. H., “Performance of Concrete Made with Commercially Produced Coarse Recycled Concrete Aggregate,” Journal of Cement and Concrete Research, 31, 707-712, 2001.
- JIANZHUANG XIAO, AND CHUANZENG ZHANG, “Fire Damage and Residual Strengths of Recycled Aggregate Concrete, “Key Engineering Materials Online: 2007-09-15ISSN: 1662-9795, Vol. 348-349, PP. 937-940, 2007.
- HONGYING DONG, WANLIN CAO, JIANHUI BIAN, AND JIANWEI ZHANG, “The Fire Resistance Performance of Recycled Aggregate Concrete Columns with Different Concrete Compressive Strengths”, Materials 2014, 7, 7843-7860; doi: 10.3390/ma7127843.
- FRANCISCO B. VARONA, FRANCISCO BAEZA-BROTONS, ANTONIO J. TENZA-ABRIL, F. JAVIER BAEZA AND LUIS BAÑÓN, “Residual Compressive Strength of Recycled Aggregate Concretes after High Temperature Exposure”, Materials 2020, 13, 1981; doi:10.3390/ma13081981.
- ALI, AL. et al., “Examining Mechanical Properties of Recycled Aggregate Concrete,” IMDC-IST 2021, September 07-09, Sakarya, Turkey Copyright © 2022, EAI DOI 10.4108/eai.7-9-2021.2314894
- TRAN MINH TUNG, OLUSOLA EMMANUEL BABALOLA, DUC-HIEN LE, “Investigation of Post Fire Mechanical Performance of Recycled Aggregate Concrete Containing Ground Granulated Blast Furnace Slag,” E3S Web of Conferences 437, 03003, 2023.
- MADUMITA SADAGOPAN, ALEXANDER OLIVA RIVERA, KATARINA MALAGA, AND AGNES NAGY, “Recycled Fine and Coarse Aggregates’ Contributions to the Fracture Energy and Mechanical Properties of Concrete,” Materials 2023, 16, 6437. https://doi.org/10.3390/ma16196437.
- HAWRAA HASAN MOUSA, ALI ABBAS KADEM, HUSSEIN SHAKIR AL-BAHRANI, AND QUSAY A. JABAL, LAITH ALASADI, “Study The Re-Use Of Construction And Demolition Waste For Friendlier Environment: Waste Concrete And Waste Granite Aggregates”, Civil and Environmental Engineering, Vol. 20, Issue 2, 711-719, DOI: 10.2478/cee-2024-0053.
- MOHAMMAD ESAM SHAREEF, DHEYAA GHANIM ABDULRAZZAQ, MURTATHA ALSHIJLAWI, “Investigation of Using Waste Glass Powder (WGP) as a Partial Natural Sand Replacement in Concrete for a Potential Use in Iraqi Construction Field,” Civil and Environmental Engineering, Vol. 19, Issue 2, pp. 700-713, DOI: 10.2478/cee-2023-0063.
- Iraqi Standard Specifications I.Q.S, “Portland Cement “, No.5 2010.
- Iraqi Standard (I.Q.S) No. 45, 1980 “Natural Resources Aggregate Used in Concrete and Building”.
- Civiconcepts. (n.d.), “Specific Gravity and Water Absorption Test of Coarse Aggregate, “ Retrieved July 5, 2024, from https://www.civiconcepts.com
- ASTM International. (2003), “ Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (ASTM C131), “
- Testbook. (n.d.). Los Angeles Abrasion Test: Purpose, Procedure, and Calculations. Retrieved July 5, 2024
- AJAY KUMAR, AROON KUMA, MUNEER AHMED MAGSI, MAHBOOB OAD, “COMPRESSIVE STRENGTH OF RECYCLED AGGREGATE CONCRETE INCORPORATING SILICA FUME, “ International Research Journal of Modernization in Engineering Technology and Science, Volume:05/Issue:10/October-2023.
- ASTM C 143/C 143M – 03, “Standard Test Method for Slump of Hydraulic-Cement Concrete,” American Society for Testing and Materials.
- BSI. (2009), “ Testing fresh concrete: Part 4 Degree of compatibility (BS EN 12350-4:2009) “.
- ALI ALSALMAN, JAMAL KHUDAIR, RAHMAN S. KAREEM, LATEEF ASSI, CANH N DANG, JOSÉ R,” Examining Mechanical Properties of Recycled Aggregate Concrete”, IMDC-IST 2021, September 07-09, Sakarya, Turkey.
- ASTM C642-13, “Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, “ ASTM International, United States, Annual Book of ASTM Standards .
- THÉRÉNÉ, F., KEITA, E., NAËL-REDOLFI, J., BOUSTINGORRY, P., BONAFOUS, L., & ROUSSEL, N, “Water Absorption of Recycled Aggregates: Measurements, Influence of Temperature and Practical Consequences,” Cement and Concrete Research, Vol. 137, 2020. https://doi.org/10.1016/j.cemconres.2020.106196.
- Bs. 2000. “Testing hardened concrete - Part 1: Shape, dimensions, and other requirements for specimens and molds,” (BS EN 12390-1:2000). BSI.
- ASTM. 1996. “Standard test method for splitting tensile strength of cylindrical concrete specimens,” (ASTM C496-96).
- MINDESS, S., YOUNG, J. F., & DARWIN, D. (2003). Concrete (2nd ed.). Prentice Hall.
- KOU, S. C., & POON, C. S. (2009), “Properties of concrete prepared with low-grade recycled aggregates,” Construction and Building Materials, 23(2), 548-556. https://doi.org/10.1016/j.conbuildmat.2008.02.005
- XIAO, J., LI, J., ZHANG, C., & ZHANG, L. (2012), “Mechanical properties of recycled aggregate concrete under uniaxial loading,” “Cement and Concrete Research, 42(3), 665-673. https://doi.org/10.1016/j.cemconres.2011.12.010
- TARIKU ASFAW TEDLA, DHARAMVEER SINGH, BURHAN SHOWKAT, “Effects of air voids on comprehensive laboratory performance of cold mix containing recycled asphalt pavement,” Construction and Building Materials, Vol. 368, 2023.
- LEE, J., LOPEZ, M.M, “An Experimental Study on Fracture Energy of Plain Concrete”, Int J Concr Struct Mater 8, 129–139 (2014). https://doi.org/10.1007/s40069-014-0068-1