References
- ANSI/AISC-360: Specification for structural steel buildings, American Institute of Steel Construction (AISC), Chicago, IL, 2022, 780 p.
- EN-1993, EUROCODE 3: Design of steel structures - Part 1-1: General rules and rules for buildings, 2005, 93p.
- THIEBAUD R. – LEBET J.P. – BEYER A. – BOISSONNADE N.: Lateral torsional buckling of steel bridge girders, Proceedings of the Annual Stability Conf,, Structural Stability Research Council Orlando, Florida, 2016, 19p.
- THIEBAUD R.: Lateral Torsional Buckling of Steel Bridges, 2014, Accessed on July 30th 2024 by the link: https://memento.epfl.ch/event/lateral-torsional-buckling-of-steel-bridges/.
- MEHRI H. – CROCETTI R.: Bracing of steel-concrete composite bridge during casting of the deck, Nordic Steel Construction Conference, Norway, 2012, 10p.
- SHEDBAL, N.: Lateral Torsional Buckling | Factors influencing LTB, 2017, Accessed on July 30th 2024 by the link: https://engineeringcivil.org/articles/civil-engineering/lateral-torsional-buckling-factors-influencing-ltb/.
- ELLWAND, O.: It could be weeks before source of buckling 102nd Avenue bridge girders is found: engineer, Edmonton journal, 2015, Accessed on July 30th 2024 by the link: https://edmontonjournal.com/news/local-news/it-could-be-weeks-before-source-of-buckling-102nd-avenue-bridge-girders-is-found-engineer.
- NAGARAJA RAO, N.R. – ESTUAR, F.R. – TALL, L.: Residual stresses in welded shapes, Fritz Laboratory Reports, 1963, pp. 93-105.
- ALPSTEN, G.A. – TALL, L.: Residual Stresses in Heavy Welded Shapes, Weld J. Res. Supl., 49, 1970, pp 93–105.
- DWIGHT, J.B. – WHITE, J.D.: Prediction of weld shrinkage stresses in plate structures. Preliminary Report, 2nd International Colloquium on Stability of Steel Structures, ECCS – IABSE, 1977, pp. 31-7.
- SKYTTEBOL, A., -JOSEFSON, B.L., -RINGSBERG, J.W.: Fatigue crack growth in a welded rail under the influence of residual stresses, Engineering Fracture Mechanics, 72, 2005, pp. 271–285.
- STRIDSMAN, R.E.: Residual stresses induced by welding in high performance steel, master’s thesis, Lulea university of technology, Lulea, Sweden, 2018, 105 p.
- VICAN, J. – GOCÁL, J. – ODROBINAK, J. – KOTES, P.: Existing steel railway bridges evaluation, Civil and Environmental Engineering, 12, 2016, pp. 103-110.
- KABIR, M.I. – BHOWMICK, A.K.: Lateral torsional buckling of welded wide flange beams. Proceedings of the annual stability conference, Structural Stability research council, Orlando, Florida, 2016, 14 p.
- ROSSI, A. – SAITO, D.H. – MARTINS, C.H.: The influence of structural imperfections on the LTB strength of I-beams, Structures, 29, 2021, pp. 1173-1186.
- TARAS, A.: Contribution to the Development of Consistent Stability Design Rules for Steel Members. TU Graz, 2010, 331 p.
- BARTH, K.E. – WHITE, D.W.: Finite element evaluation of pier moment-rotation characteristics in continuous-span steel I Girders, Engineering Structures, 2019, 98, pp. 761–78.
- SUBRAMANIAN, L. – WHITE, D.W.: Resolving the disconnects between lateral torsional buckling experimental tests, test simulations and design strength equations, J Constr Steel Res, 128, 2017, pp. 321–34.
- BOISSONNADE, N., -SOMJA, H.: Influence of imperfections in FEM modeling of lateral torsional buckling, Proceeding Annu. Stab. Conf. Struct. Stab. Res. Counc, 2012, pp. 1–15.
- LE, T. – BRADFORD, M.A., -LIU, X., -VALIPOUR, H.R.: Buckling of welded high-strength steel I-beams, Journal of Constructional Steel Research, 168, 2020, pp. 105938.
- TRAHAIR, N.S., -BRADFORD, M.A., -NETHERCOT, D.A., GARDNER, L.: The behaviour and design of steel structures to EC3. 4th edition, Taylor and Francis publisher, 1988, 513 p.
- TRAHAIR, N.S.: Inelastic buckling design of monosymmetric I-beams, Journal of Engineering Structures, 34, 2012, pp. 564-571.
- KUBO, M. – FUKOMOTO, Y.: Lateral torsional buckling of thin walled I beams, Journal of Structural Engineering, 114, 1988, pp. 841 – 855.
- NISHINO, F.– TALL, L. – OKUMURA, T.: Residual stress and torsional buckling strength of H and cruciform columns, Transaction of JSCE, 160, 1968, pp. 75-87.
- BAKER, K.A. – KENNEDY, D.J.: Resistance factors for laterally unsupported steel beams and biaxially loaded steel beam columns, Canadian J.of Civil Engineering, 11, 1984, pp. 1008 – 1019.
- ZIEMIAN, R.D.: Guide to stability design criteria for metal structures, John Wiley&Sons, 2010.
- ABEBE, D. – CHOI, J. – PARK, J.U.: Study on Inelastic Buckling and Residual Strength of H-Section Steel Column Member, International journal of steel structures, 15, 2014, pp. 365-374.
- KENNEDY, D.J.L. – ALY, M.G.: Limit states design of steel structures-performance factors, Canadian Journal of Civil Engineering, 7, 1980, pp. 45 – 77.
- WHITE, D.W. – JEONG, W.Y. – TOGAY, O.: Comprehensive Stability Design of Steel Members and Systems via Inelastic Buckling Analysis. 8th International Symposium on Steel Structures, Jeju, Korea, 2015, 13 p.
- COUTO C. – VILA REAL P.: Numerical investigation on the influence of imperfections in the lateral-torsional buckling of beams with slender I-shaped welded sections, Thin-Walled Struct., 145, 2019, pp. 106429.
- VALEŠ, J. – STAN, T.C.: FEM Modelling of Lateral-Torsional Buckling Using Shell and Solid Elements, Procedia Engineering, 190, 2017, pp. 464-471.
- PEZESHKY, P. – SAHRAEI, A. – MOHAREB, M.: Effect of bracing height on lateral torsional buckling resistance of steel beams. The CSCE con. on the Leadership in Sustainable Infrastructure, Vancouver, Canada, 2017, 10 p.
- DOU, C. – PI, Y.L.: Effects of Geometric Imperfections on Flexural Buckling Resistance of Laterally Braced Columns, ASCE Journal of Structural Engineering, 142, 2016, pp. 04016048.
- KORTIS J. – DANIEL, L. – SKARUPA, M. – DURATNY, M., Experimental model test of the laboratory model of steel truss structure, Civil and Environmental Engineering, 12, 2016, pp. 116-121.
- GOCAL, J. – HLINKA, R. – JOST, J. – BAHLEDA, F., Experimental analysis of stiffness of the reveted steel railway bridge deck members‘ joints, Civil and Environmental Engineering, 10, 2014, pp. 104-109.
- CANH, T.N. – JIHO, M. – VAN, N.L. – LEE, H.E.: Lateral-torsional buckling of I-girders with discrete torsional bracings, Journal of Constructional Steel Research, 66, 2010, pp. 170-177.
- CANH,T.N. – JIHO,M. – VAN,N.L. – LEE,H.E.: Flexural-torsional buckling strength of I-girders with discrete torsional braces under various loading conditions, Engineering Structures, 36, 2012, pp. 337-350.
- CANH,T.N. – JIHO,M. – VAN, N.L. – LEE, H.E.: Natural frequency for torsional vibration of simply supported steel I-girders with intermediate bracings, Thin-Walled Struc., 49, 2011, pp. 534-542.
- FOSTER, A.S.J. – GARDNER, L.: Ultimate behaviour of continuous steel beams with discrete lateral restraints, Thin-Walled Structures, 88, 2015, pp. 58-69.
- MOHAMMADI, E. – HOSSEINI, S.S., -ROHANIMANESH, M.S.: Elastic lateral-torsional buckling strength and torsional bracing stiffness requirement for monosymmetic I-beams, Thin-Walled Structures, 104, 2016, pp. 116-125.
- NAKAMURA, T.: Strength and Deformability of H-Shaped Steel Beams and Lateral Bracing Requirements, J Construct. Steel Research, 9, 1988, pp. 217-228.
- TONG, G.S. – CHEN, S.F.: Buckling of Laterally and Torsionally Braced Beams, J Construct. Steel Research, 11, 1988, pp. 41-55.
- PHE, P.V. – HUY, N.X.: Moment resistances of wide flange beams with initial imperfection and residual stresses, Journal of Materials and Engineering Structures, 7, 2020, pp. 651-658.
- PHE, P.V.: Enhancement of moment resistance of steel beams with initial imperfections and residual stresses by using stiffeners and GFRP plates, Journal of Materials and Engineering Structures, 7, 2020, pp. 659-667.
- BACHIRI, A. – BOUSSOUAR, A. – KABOUCHE, A. – SULEIMAN, M.F.: Numerical Study on Lateral Torsional Buckling of High Steel Welded I-Section Beam, First Arab Conference on Me. Eng., Biskra, Algeria, 2017, 6 p.
- YI, G.S.– KIM, J.K. – CHOI, B.H.: Inelastic moment-rotation response of 690 MPa Grade Steel I-section girders, International Journal of Steel Structures, 17, 2017, pp. 1667-2678.
- VIČAN, J. – FARBAK, M., Analysis of high-strength steel pin connection, Civil and Environmental Engineering, 16, 2020, pp. 276-281.