References
- TALEBI, E. - ZHAMATKESH, F.: Performance of BRBF System and Comparing it with the OCBF. Int. J. Civil, Environ. Struct. Constr. Archit. Eng., Vol. 4, No. 8, 2010, pp. 863–870.
- LAXMI GOLI, B. - KUMAR YERRAAMASETTY, H. - Nagarathinam, L. - Nandam, S.: Analytical Study of Buckling Restrained Braced Frames Under Lateral Loads Using Etabs. Int. J. Pure Appl. Math., Vol. 115, No. 8, 2017, pp. 431–436.
- BLACK, C. J. - MAKIRS, N. - I. D. AIKEN, D.: Component Testing, Seismic Evaluation and Characterization of Buckling-Restrained Braces. J. Struct. Eng., Vol. 130, No. 6, 2004, pp. 880–894.
- Babu, M. G.: Reliability Analysis for Buckling Restrained Braced Frame (BRBF). Int. J. Eng. reseach Technol., Vol. 10, No. 06, 2021, pp. 512–516.
- D. K. S. - S. C. G.: Significance of P-Delta Effects in High Rise RC Structure in Various Seismic Zones. 2021.
- VISWANATH, K. - PRAKASH, K. B. - Anant, D.: Seismic Analysis of Steel Braced Reinforced Concrete Frames. Int. J. Civ. Struct. Eng., Vol. 1, No. 1, 2010, pp. 114–122.
- KIM, J. - CHOI, H.: Behavior and design of structures with buckling-restrained braces. Eng. Struct., Vol. 26, No. 6, May 2004, pp. 693–706.
- SAHOO, D. R. - CHAO, S. H.: Performance-based plastic design method for buckling-restrained braced frames. Eng. Struct., Vol. 32, No. 9, Sep. 2010, pp. 2950–2958.
- AVINASH, T. - AUGUSTINE MANIRAJ PANDIAN, G.: Investigation of the effects of P-delta on tubular tall buildings. Int. J. Civ. Eng. Technol., Vol. 8, No. 2, 2017, pp. 487–495.
- SOMASE, A. N. - SAYYED, S. - GAWAI, A. G. - GAIKWAD, S. S.: Seismic Analysis of RCC Structure with Various Types of Bracing System Using ETABS for Different Seismic Zone. 2021.
- FERDINAND, N. - JIANCHANG, Z. - QIANGQIANG, Y. - WANG, G. - JUNJIE, X.: Research on application of buckling restrained braces in strengthening of concrete frame structures. Civ. Eng. J., Vol. 6, No. 2, Feb. 2020, pp. 344–362.
- SURENDRAN, N. - SUBHA, K.: Seismic Evaluation of Building With Buckling Restrained Braces (Brb). Int. J. Sci. Eng. Research, Vol. 8, No. 11, 2017, pp. 80–86.
- IS-1893-PART-1-2016: Criteria for Earthquake resistant design of structures, Part 1: General Provisions and buildings. Bur. Indian Stand. New Delhi, Vol. 1893, No. December 2016, pp. 1–44.
- IS 16700 , 2017: Indian Standard Criteria for Structural Safety of Tall Concrete Buildings. Bureau of Indian Standards, New Delhi, No. Reaffirmed 0, 2017, p. 32.
- IS: 875, 2015: Indian Standard design loads (other than earthquake) for buildings and structures-code of practice,part 3 (wind loads). Bureau of Indian Standards, New Delhi, 2015, p. 51.
- O. MARK - A. EDE - Ch. ARUM - P. AWOYERA: Strength and Durability Assessments of Induction Furnace Slag - Quarry Dust - Based High Performance Self - Compacting Concrete. Civil and Environmental Engineering, Vol. 18, Iss. 1, 2022, p. 1-16, doi: https://doi.org/10.2478/cee-2022-0001.
- P. SIYANI - S. TANK - P. V PATEL: Learning of etabs software - Design, 2009, pp. 1–50.