References
- VIJAYALAKSHMI, R. - RAMANAGOPAL, S.: Compression behaviour of polypropylene fibre reinforced cellular light weight concrete masonry prism. Civil and Environmental Engineering Reports, 2020.
- ACI Committee 213R-03, Guide for Structural Lightweight-Aggregate Concrete, American Concrete Institute, USA, 2003, pp. 1-37.
- KE, Y. - BEAUCOUP, A. L. - ORTOLA, S. - DUMONTET, H. - CABRILLAC, R.: Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete. Construction and Building Materials, 23, 8, 2008, pp. 2821-2828.
- WIDODO, S. - SATYARNO, I. - TUDJONO, S.: Effects of hybrid polypropylene-steel fiber addition on some hardened properties of lightweight concrete with pumice breccia aggregate. International Scholarly Research Notices, 2012.
- SHOAIB, A. - LUBELL, A. S. - BINDIGANAVILE, V. S.: Shear response of lightweight steel fiber reinforced concrete members without stirrups. Materials and Structures, 48, 10, 2015, pp. 3141-3157.
- KHALIL, W. I. - MOZAN, S. A.: Some Properties of Hybrid Fibers High Strength Lightweight Aggregate Concrete. Engineering and Technology Journal, Vol. 33(4), 2015.
- SUNDAR, R., et al.: Flexural behaviour of polyproplene fiber reinforced concrete beams. Int J Eng Sci Comput, 7.3, 2017, pp. 5507-5511.
- SLDOZIAN, R. J. A.: Preparing Light Weight Concrete with Reinforced Fibers. Al-Nahrain Journal of Science, 20, 1, 2017, pp. 51-57.
- SINGH, N. K. - RAI, B.: A review of fiber synergy in hybrid fiber reinforced concrete. Journal of applied engineering sciences, 8, 2, 2018, pp. 41-50.
- INFANT ALEX, X. - ARUNACHALAM, K.: Flexural behavior of fiber reinforced lightweight concrete. Revista de la construcción, 2019, 18.3, pp. 536-544.
- SHANMUGAM, G. - GUNASEKARAN, E. - KARUPPUSAMY, R. S. - RAMESH, R. - VELLAICHAMY, P.: Utilization of aerogel in building construction–A Review. IOP Conference Series: Materials Science and Engineering. Vol. 955, No. 1, 2020.
- ISMAEL, T. M. - MOHAMMED, S. D.: Enhancing the mechanical properties of lightweight concrete using mono and hybrid fibers. IOP Conference Series: Materials Science and Engineering. Vol. 1105, No. 1, 2021.
- RAFAL, H.: Bond Behavior of Lightweight Foamed Reinforced Cconcrete. College of Engineering, the University of Diyala in Partial Fulfillment of the Requirements, Iraq, 2021, pp. 57-58.
- YANG, K. H. - KIM, H. Y. - LEE, H. J.: Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers. International Journal of Concrete Structures and Materials, 16.1, 2022, pp. 1-14.
- ZHOU, Y. - CHEN, M. G.: Static and Dynamic Compression Performances of Hybrid Fiber -Reinforced Lightweight Aggregate Concrete. Advances in Civil Engineering, 2022.
- KUMAR, A. D. - POLURAJU, P. - KASAGANI, H.: Experimental Investigation on Mechanical Properties of Lightweight Aggregate Concrete. Civil and Environmental Engineering, Vol. 18, Iss. 2, 2022, pp. 666-677, doi: https://doi.org/10.2478/cee-2022-0061.
- HRABOVÁ, K. - LÁNÍK, J. - LEHNER, P.: Statistical and practical evaluation of the mechanical and fracture properties of steel fibre reinforced concrete. Buildings, Vol. 12.8, 2022, art. 1082.
- IRAQI Standard Specification No. 5/1984: Portland cement. Central Organization for Standardization and Control Quality.
- IRAQI Standard Specification No. 45/1984, Aggregate from Natural Sources for Concrete and Construction. Central Organization for Standardization and Control Quality.
- ASTM, C 330 – 04 Standard: Specification for Portland cement test, West Conshohocken, PA, American Society for Testing and Materials, 2004.
- BS EN 12390-3:2019: Testing hardened concrete - Compressive Strength of test specimens. British Standards Institution, 2019.
- ASTM C496/C496M-11: Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. American Society of Testing and Materials, 2011.
- ASTM C 143/C143M-03: Standard Test Method for Slump of Hydraulic-Cement Concrete, Manual Book of ASTM Standards, Vol. 04.02, Concrete and Aggregates, West Conshohocken, PA, 2003, 4 p.
- ABD, S. M. - ISMAIL, D. K. - GHALIB, D.: Mechanical properties of the lightweight foamed concrete with steel fiber of different aspect ratios. 1st International Scientific Conference of Engineering Sciences-3rd Scientific Conference of Engineering Science (ISCES). IEEE, 2018, pp. 305-310.