Have a personal or library account? Click to login
Open Access
|May 2023

References

  1. MISHUTIN, A. - ZELJKO, K. - IRYNA, G. - CHINTEA, L.: Durability of modified fiber concrete for rigid pavements. Croatian Regional Development Journal, Vol. 2, Iss. 1, 2018, pp. 30-40, https://doi.org/10.2478/crdj-2021-0006.
  2. ESMAILPOUR, M. - RAHMANI, K. - PIROTI, S.: Experimental evaluation of the effect of silica fume on compressive, tensile strength, abrasion resistance, slump and impact test and water permability coefficient of concrete. Journal of Applied Engineering Sciences, Vol. 8, Iss. 1, 2018, pp. 27-36, https://doi.org/10.2478/jaes-2018-0004.
  3. ACI 522R-10, Report on pervious concrete. American Concrete Institute Committee 522, 2010,
  4. ACI Material Journal, Vol. 108, Iss. 1, 2011, pp. 46-54, https://www.concrete.org/publications/acimaterialsjournal.aspx.
  5. GUNAWAN, C.: Perilaku kekuatan tekan beton serbuk reaktif, Tugas Akhir, RC 14-1501. Jurnal Fakultas Teknik Sipil dan Perencanaan Universitas Sebelas November, https://repository.its.ac.id/59890/1/3111100027-Undergraduate%20Thesis.pdf.
  6. KRISTIADI, A. - MARZUKO, A.: Pengaruh penambahan bahan additif berupa campuran semen dengan difa ® ss pada tanah butir halus terhadap nilai Cbr (California Bearing Ratio). Jurnal Teknik Sipil, Uniersitas Islam Indonesia, 2016, https://dspace.uii.ac.id/bitstream/handle/123456789/1630/08%20naskah%20publikasi.pdf?sequence=17&isAllowed=y.
  7. ASTM International, 2004, ASTM 2004 Vol. 04.02, Concrete and Aggregates.
  8. Civil Rights Data Collection, CRD-C 104-80, Method of calculation of the fineness modulus of aggregate. The U.S. Department of Education, 1980.
  9. ACI Material Journal: Rational proportioning of preformed foam cellular concrete, 1967.
  10. FERDIAN, F. - MAKMUR, A.: Studi penelitian komposisi beton berpori dengan variasi dan persentase bahan admixture terkait nilai kuat tekan beton pada aplikasi sidewalk, Laporan Penelitian, 2011.
  11. MULYONO, T. - M. T. Ir.: Teknologi beton, Fakultas Teknik, Universitas Negeri Jakarta, 2005.
  12. MURDOCK, L. J. - BROOK, K. M. - HINDARKO: Bahan dan Praktek Beton Edisi Keempat, Erlangga, 2013, Jakarta, http://e-journal.uajy.ac.id/8413/7/TS614010.pdf.
  13. NUGRAHA - PAUL. - ANTONI: Teknologi Beton, Penerbit ANDI, Yogyakarta, 2007.
  14. INDRAYADI, M. - SUTANDAR, E. - SUPRIYADI, A. - SALIM, D. - ELIZABET: Beton berpori precast. Journal of Civil Engineering University of Tanjungpura, Vol. 21, Iss. 2, 2021, pp. 146-155, https://jurnal.untan.ac.id/index.php/jtsuntan/article/view/51318.
  15. SUTANDAR, E. – SUPRIYADI, A. – INDRAYADI, M. – SYAHRUDIN: The Effect of Coarse Aggregate Size on Pervious Concrete Mixture. Journal of Civil Engineering University of Tanjungpura, Vol. 22, Iss. 1, 2022, https://jurnal.untan.ac.id/index.php/jtsuntan/article/view/55159.
  16. SK SNI S-04-1989-F: Spesifikasi bahan bangunan bagian a. Departemen Pekerjaan Umum.
  17. SNI 03-1968-1990: Metode pengujian tentang analisis saringan agregat halus dan kasar. Departemen Pekerjaan Umum.
  18. SNI 03-1969-1990: Metode pengujian berat jenis danpenyerapan air agregat kasar. Departemen Pekerjaan Umum.
  19. SNI 03-1973-1990: Metode pengujian berat isi beton. Departemen Pekerjaan Umum.
  20. SNI 03-2491-2002: Metode pengujian kuat tarik belah beton. Departemen Pekerjaan Umum.
  21. SNI 03-4431-1997: Metode pengujian kuat lentur normal dengan dua titik pembebanan. Departemen Pekerjaan Umum.
  22. WAHYUNI, M. S. - YANTI G. - ZAINURI: Hubungan karakteristik beton porous dengan variasi komposisi agregat kasar. Program Studi Teknik Sipil Fakultas Teknik Universitas Tri sakti, 2021, https://e-journal.trisakti.ac.id/index.php/pakar/article/view/6794.
  23. HADIJAH, I.: Analisis kepadatan lapangan dengan sand cone pada kegiatan peningkatan struktur jalan tegineneng, batas kota metro. Jurusan Teknik Sipil Fakultas Teknik Universitas Muhammadiyah Metro, 2015, https://ojs.ummetro.ac.id/index.php/tapak/article/view/138.
  24. PETKOVA-SLIPETS, R. - ZLATEVA, P.: Thermal properties of a new pavement material for using in road construction. Civil and Environmental Engineering, Vol. 14, Iss. 2, 2018, pp. 99-104, https://doi.org/10.2478/cee-2018-0013.
  25. Al-LUHYBI, A. S. - DIYAR, N. - QADER, D. N.: Mechanical properties of concrete with recycled plastic waste. Civil and Environmental Engineering, Vol. 17, Iss. 2, 2021, pp. 629-643, https://doi.org/10.2478/cee-2021-0063.
  26. ADNAN, D. - FALAH, H.: Punching shear behavior of fibrous high strength concrete slabs reinforced with bfrp bars. Civil and Environmental Engineering, Vol. 18, Iss. 2, 2022, https://doi.org/10.2478/cee-2022-0054.
  27. ASTM International, ASTM C1701, Standard test method for infiltration rate of in place pervious concrete, 2009.
  28. MULYONO, T.: Modul 5 Mekanika tanah dan pondasi. Modul Fakultas Teknik Universitas, Negeri Jakarta, 2017, file:///C:/Users/user/Downloads/5_klasifikasitanah.pdf.
DOI: https://doi.org/10.2478/cee-2023-0005 | Journal eISSN: 2199-6512 | Journal ISSN: 1336-5835
Language: English
Page range: 48 - 58
Published on: May 12, 2023
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year

© 2023 Asep Supriyadi, Erwin Sutandar, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.