References
- [1] TAM, V. W. Y.: Cost effectiveness of using low cost housing technologies in construction. Procedia Engineering, Vol. 14, 2011, pp. 156-160.10.1016/j.proeng.2011.07.018
- [2] LÓPEZ, M. - BELINDA, Á. P. - ANA, T. - TERESA, G.: Comparison of environmental impacts of building structures with in situ cast floors and with precast concrete floors. Building and Environment, Vol. 44, No. 4, 2009, pp. 699-712.10.1016/j.buildenv.2008.05.017
- [3] EMMANUEL, R.: Estimating the environmental suitability of wall materials: preliminary results from Sri Lanka. Building and Environment, Vol. 39, No. 10, 2004, pp. 1253-1261.10.1016/j.buildenv.2004.02.012
- [4] GALÁN, M. C. - CARLOS, R. G. ANTONIO G. M.: Embodied energy of conventional load-bearing walls versus natural stabilized earth blocks. Energy and Buildings, Vol. 97, 2015, pp. 146-154.10.1016/j.enbuild.2015.03.054
- [5] HUANG, B. - XIAOFENG, G. - XIAOZHEN, X. - JIALING S. - YONG, G. - JOSEPH, S. - TOMER, F. - HARNWEI, K. - JUN, N.: A life cycle thinking framework to mitigate the environmental impact of building materials. One Earth 3, Vol. 5, 2020, pp. 564-573.10.1016/j.oneear.2020.10.010
- [6] YASANTHA, A. U. G., - SANDHYA, B.: A quest for sustainable materials for building elements in Sri Lanka: Foundations. Environmental progress & sustainable energy, Vol. 29, No. 3, 2010, pp. 370-381.10.1002/ep.10420
- [7] DIAS, W. P. S. - POOLIYADDA, S. P.: Quality based energy contents and carbon coefficients for building materials: A systems approach. Energy, Vol. 29, No. 4, 2004, pp. 561-580.10.1016/j.energy.2003.10.001
- [8] CHURKINA. - GALINA. - ALAN. O. - CHRISTOPHER P. R. - ANDREW R. K. V. - ZHU. L. -BARBARA. K. - RECK T. E. G. - HANS J. S.: Buildings as a global carbon sink. Nature Sustainability, Vol. 3, No. 4, 2020, pp. 269-276.10.1038/s41893-019-0462-4
- [9] RYSANEK, A. M. - CHOUDHARY. R.: Optimum building energy retrofits under technical and economic uncertainty. Energy and Buildings, Vol. 57, 2013, pp. 324-337.10.1016/j.enbuild.2012.10.027
- [10] JRADI – MUHYIDDINE – CHRISTIAN. V. – BO, N. J.: Deep energy renovation of the Mærsk office building in Denmark using a holistic design approach. Energy and Buildings, Vol. 151, 2017, pp. 306-319.10.1016/j.enbuild.2017.06.047
- [11] DOTZLER, CH. - SEBASTIAN, B. – DANIEL, K. WERNER, L.: Methods for optimising energy efficiency and renovation processes of complex public properties. Energy and Buildings, Vol. 164, 2018, pp. 254-265.10.1016/j.enbuild.2017.12.060
- [12] ALMULHIM - MOHAMMAD, S. M. - DEXTER, V. H. - CHRIS D. R.: A Resilience and Environmentally Sustainable Assessment Framework (RESAF) for Domestic Building Materials in Saudi Arabia. Sustainability, Vol. 12, No. 8, 2020, pp. 30-92.10.3390/su12083092
- [13] STEVULOVA, N. - JUNAK, J.: Green Building Materials Based on Waste Filler and Binder. Civil and Environmental Engineering, Vol. 17, Iss. 2, 2021, pp. 542-548.10.2478/cee-2021-0055
- [14] DĘBSKA, L.: Assessment of the Indoor Environment in the Intelligent Building. Civil and Environmental Engineering, Vol. 17, Iss. 2, 2021, pp. 572-582.10.2478/cee-2021-0058
- [15] ABDURREHMAN - HAFIZ, M. - FAHAD, A. - ALSULAIMAN - AAMIR, M. - SEHAR SHAKIR, -MUHAMMAD, U.: The potential of energy savings and the prospects of cleaner energy production by solar energy integration in the residential buildings of Saudi Arabia. Journal of cleaner production, Vol. 183, 2018, pp. 1122-1130.10.1016/j.jclepro.2018.02.187
- [16] AL SHAMES, M.: Sustainability in residential architecture at the level of interior design. Journal of the College of Arts and Media, Vol. 6, No. 11, 2021.
- [17] ALSAYED, S.: Building with Positive Solar Architecture and Methods of Integrating Photovoltaic Cells with Buildings. Master Thesis, Department of Architecture, Cairo University, 2010, 20 p.
- [18] ENAS, R.: Foundations of Employing Environmental Techniques in Architecture. Master’s Thesis. Faculty of Engineering, Department of Architecture, Cairo University, 2010, 7 p.
- [19] EL ESAWY, M.: Economics of Environmental Design, Ph.D. Thesis, Department of Architecture, Cairo University, 2007, 149 p.
- [20] SHERIF, A.: The Importance of Energy and Environmental Aspects in the Design of Solar Passive Buildings. Doctoral Thesis. Architecture Department, Ain Shams University, 2002, p. 58.
- [21] ABEYSUNDARA, U. Y. - SANDHYA, B. - SHABBIR G.: A matrix in life cycle perspective for selecting sustainable materials for buildings in Sri Lanka. Building and environment, Vol. 44, No. 5, 2009, pp. 997-1004.10.1016/j.buildenv.2008.07.005
- [22] RINALDI, R. - ABDELRAHMAN. M. - HANNA, A.: Experimental Investigation on Shell Footing Models Employing High-Performance Concrete. International Congress and Exhibition Sustainable Civil Infrastructures : Innovative Infrastructure Geotechnology, 2017, pp. 373-390.
- [23] LI JIE - HAO, Z. - WENWEN, C. - ZHONGFAN, C.: Mechanical properties of a new type recycled aggregate concrete interlocking hollow block masonry. Sustainability, Vol. 13, No. 2, 2021, 15 p.10.3390/su13020745
- [24] THANOON - WALEED, A. - MOHD, S. J. - MOHD, R. A. - ABANG, A. D. N.: Development of an innovative interlocking load bearing hollow block system in Malaysia. Construction and Building Materials, Vol. 18, No. 6, 2004, pp. 445-454.10.1016/j.conbuildmat.2004.03.013
- [25] THALLON, R.: Dry-Stack Block. Precision-ground concrete blocks make it easy to build a wall. Fine Homebuilding, August/September 1983, pp. 54-57.
- [26] KHAN, H. S. – MUHAMMAD, A.: Impact of green roof and orientation on the energy performance of buildings: A case study from Saudi Arabia. Sustainability, Vol. 9, No. 4, 2017, 18 p.10.3390/su9040640