Finite Element Analysis of Double-Bolt Shear-Out Fracture Failure

Adewole Kazeem Kayode; Leopold Mbereyaho

doi:10.2478/cee-2020-0021

Abstract

This paper presents the finite element (FE) analysis of double-bolt shear-out (DBSO) fracture failure. The DBSO fracture shape consists of two oppositely: inclined outer main shear fractures, inner main shear fracture, outer shear lips, and curved inner curved fractures. The DBSO begins with two outer main shear fracture initiations under shear, vertical compressive bending, and sideways bending deformations/stresses followed by the two inner main shear fracture initiations under shear and vertical compressive bending deformations. The outer shear lips occurred under vertical compression bending, shear, and sideways tensile bending stresses/deformations while the two inner curved fractures occur under rotational deformation.

References

[1] KANVINDE, A. M. - DEIERLEIN, G. G.: Finite-Element Simulation of Ductile Fracture in Reduced Section Pull-Plates Using Micromechanics-Based Fracture Models. Journal of Structural Engineering, 2007, DOI: 10.1061/(ASCE)0733-9445(2007)133:5(656), pp. 1-39.
Open DOI Search in Google Scholar Back to article
[2] PRZYWARA, J. - KAPIL, K.: Failure in Structural Steels and Overview of I-35W, Bridge Collapse. University of Notre Dame, 2017, https://www3.nd.edu/~cpssl/group/work/Failure-in-Structural-Steels-and-Overview-of-I-35W-Bridge-Collapse.pdf. Assessed on 24/06/2018.
Search in Google Scholar Back to article
[3] ROGERS, C. A. - HANCOCK, G. J.: Failure Modes of Bolted Sheet Steel Connections Loaded in Shear. Research Report No R772, Centre for Advanced Structural Engineering, Department of Civil Engineering, Sydney NSW 2006, AUSTRALIA, http://www.civil.usyd.edu.au, assessed 20th May, 2016.
Search in Google Scholar Back to article
[4] MOŽE, P. - BEG, D. A complete study of bearing stress in single bolt connections. Journal of Constructional Steel Research, 95, 2014, pp. 126–140.10.1016/j.jcsr.2013.12.002
Search in Google Scholar Back to article
[5] VANDER VOORT, G. F.: Visual examination and light microscopy, ASM Handbook, Vol. 12, Fractography, ASM International, Materials Park, Ohio, 1987, pp. 91–165.10.31399/asm.hb.v12.a0001834
Search in Google Scholar Back to article
[6] MOŽE, P. - BEG, D.: High strength steel tension splices with one or two bolts. Journal of Constructional Steel Research 66, 2010, pp. 1000-1010.10.1016/j.jcsr.2010.03.009
Search in Google Scholar Back to article
[7] KIM, T. - KUWAMURA, H.: Finite element modelling of bolted connections in thin-walled stainless steel plates under static shear. Thin-Walled Structures 45, 2007, pp. 407–42110.1016/j.tws.2007.03.006
Search in Google Scholar Back to article
[8] KIM, T. - KUWAMURA, H.: Numerical investigation on strength design and curling effect of mechanically fastened joints in cold-formed austenitic stainless steel. Materials and Design, 32, 2011, pp. 3942–3956.10.1016/j.matdes.2011.02.030
Search in Google Scholar Back to article
[9] KIM, T. S. - HAN, B. S.: Numerical Simulation and Effect of Curling on Bolted Connections in Cold-formed Stainless Steel. ISIJ International, Vol. 47(6), 2007, pp. 920–929.10.2355/isijinternational.47.920
Search in Google Scholar Back to article
[10] KIM, T. S. - KUWAMURA, H. - KIM, S. - LEE, Y. T. - CHO, T.: A parametric study on ultimate strength of single shear bolted connections with curling. Thin-Walled Structures, 46, 2008, pp. 38–53.10.1016/j.tws.2007.08.009
Search in Google Scholar Back to article
[11] KIM, T. S. - KUWAMURA, H. - KIM, S. - LEE, Y. T. - CHO, T.: Investigation on ultimate strength of thin-walled steel single shear bolted connections with two bolts using finite element analysis. Thin-Walled Structures, 47, 2009, pp. 1191–1202.10.1016/j.tws.2009.04.009
Search in Google Scholar Back to article
[12] DRAGANIĆ, H. - DOKŠANOVIĆ, T. - MARKULAK, D.: Investigation of bearing failure in steel single bolt lap connections. Journal of Constructional Steel Research, 98, 2014, pp. 59–72.10.1016/j.jcsr.2014.02.011
Search in Google Scholar Back to article
[13] SALIH, E. L. - GARDNER, L. - NETHERCOT, D. A.: Bearing failure in stainless steel bolted connection. Engineering Structures, 33, 2011, pp. 549–562.10.1016/j.engstruct.2010.11.013
Search in Google Scholar Back to article
[14] HOOPUTRA, H. - GESE, H. - DELL, H. - WERNER, H. A.: Comprehensive failure model for crashworthiness simulation of aluminium extrusions. International Journal of Crashworthiness, 9(5), 2004, pp. 449–64.10.1533/ijcr.2004.0289
Search in Google Scholar Back to article
[15] SIMULIA 2007: Abaqus documentation, Abaqus Incorporated, Dassault Systemes, 2007.
Search in Google Scholar Back to article
[16] ADEWOLE, K. K. - BULL, S. J.: Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation. Construction and Building Materials, 41, 2013, pp. 9–14.10.1016/j.conbuildmat.2012.11.089
Search in Google Scholar Back to article
[17] ADEWOLE, K. K. - BULL, S. J.: Numerical Prediction of Differences in Micromechanical Fracture Sequence in Notched and Un-Notched Wires for Civil Engineering Applications. Civil Engineering Dimension, Vol. 16, No. 2, Sept. 2014, pp. 87-95.10.9744/ced.16.2.87-95
Search in Google Scholar Back to article
[18] ADEWOLE, K K. - TEH, L. H.: Predicting Steel Tensile Responses and Fracture Using the Phenomenological Ductile Shear Fracture Model. Journal of Materials in Civil engineering, American Society of Civil Engineers, 2017, 06017019-6, DOI: 10.1061/(ASCE)MT.1943-5533.0002094.
Open DOI Search in Google Scholar Back to article
[19] ADEWOLE, K. K. – OLUTOGE: Numerical prediction of structural steel flat and slant fracture modes using phenomenological shear fracture model. Journal of King Saud University-Engineering Sciences, 31, 2017, pp. 234 – 237, DOI: 10.1016/j.jksues.2017.11.001.
Open DOI Search in Google Scholar Back to article
[20] WANG Y. B. - LYU, Y. F. - LI, G. Q.: Experimental investigation of two-bolt connections for high strength steel members. 12th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2018). Universitat Politècnica de València, València, Spain, June 27-29, 2018, http://dx.doi.org/10.4995/ASCCS2018.2018.7211.10.4995/ASCCS2018.2018.7211
Search in Google Scholar Back to article
[21] ADEWOLE, K. K. - ADESOGAN, S. O.: Finite Element Single-Bolt Shear Connection Shear-Out Fracture Failure Analysis. Journal of Failure Analysis and Prevention. Vol. 18, Issue 3, 2018, pp. 659 – 666, https://doi.org/10.1007/s11668-018-0457-x.10.1007/s11668-018-0457-x
Search in Google Scholar Back to article

Finite Element Analysis of Double-Bolt Shear-Out Fracture Failure

Abstract

Paradigm

My account