References
- [1] SIBURG, C. - HEGGER, J.: Experimental investigations on the punching behaviour of reinforced concrete footings with structural dimensions. Structural Concrete, Vol. 15, Iss. 3, 2014, DOI:10.1002/suco.201300083.10.1002/suco.201300083
- [2] TOMASOVICOVA, D. – JENDZELOVSKY, N.: Stiffness Analysis of the Subsoil under Industrial Floor. Procedia Engineering, Vol. 190, 2017, pp. 365-370, DOI:10.1016/j.proeng.2017.05.350.10.1016/j.proeng.2017.05.350
- [3] TOMASOVICOVA, D. - JENDZELOVSKY, N. - MARTON, P.: Damage analysis of the industrial floor in the storage hall. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, Vol. 17, Iss. 12, 2017, pp. 191-198, DOI: 10.5593/sgem2017/12/S02.025.10.5593/sgem2017/12/S02.025
- [4] HRUBESOVA, E. - MOHYLA, M. - LAHUTA, H. - BUI, T.Q. - NGUYEN, P.D.: Experimental analysis of stresses in subsoil below a rectangular fiber concrete slab. Sustainability (Switzerland), Vol. 10, Iss. 7, art. no. 2216, 2018.10.3390/su10072216
- [5] PAZDERA, L. - CAJKA, R. - L. TOPOLÁŘ, - MATECKOVA, P. – BILEK, V. - SUCHARDA, O. Measurement and Utilization of Acoustic Emission for the Analysis and Monitoring of Concrete Slabs on the Subsoil. Periodica Polytechnica Civil Engineering, Vol. 63, Iss. 2, 2019, pp. 608-620, DOI:10.3311/PPci.12695.10.3311/PPci.12695
- [6] SUCHARDA, O. - SMIRAKOVA, M. - VASKOVA, J. - MATECKOVA, P.- KUBOSEK, J. - CAJKA, R.: Punching Shear Failure of Concrete Ground Supported Slab, International Journal of Concrete Structures and Materials, Vol. 12, Iss. 1, art. no. 36, 2018, DOI:10.1186/s40069-018-0263-6.10.1186/s40069-018-0263-6
- [7] KRÁLIK, J.: Probabilistic safety assessment of the design of tall buildings under the extreme load, AIP Conference Proceedings, 1738, art. no. 480088, 2016, DOI:10.1063/1.4952324.10.1063/1.4952324
- [8] KOTRASOVA, K. - KORMANIKOVA, E. Dynamic analysis of liquid storage tanks. AIP Conference Proceedings, 1863, art. no. 260005, 2017, DOI:10.1063/1.4992419.10.1063/1.4992419
- [9] SUCHARDA, O. - BILEK, V. - SMIRAKOVA, M. - KUBOSEK J. - CAJKA, R.: Comparative Evaluation of Mechanical Properties of Fibre Reinforced Concrete and Approach to Modelling of Bearing Capacity Ground Slab, Periodica Polytechnica Civil Engineering, Vol. 61, No. 4, 2017, DOI:10.3311/PPci.10688.10.3311/PPci.10688
- [10] CERVENKA, V. - JENDELE L. – CERVENKA, J.: ATENA Program documentation - Part 1: Theory. Cervenka Consulting. Pratur. 2016.
- [11] SUCHARDA O. - KONECNY, P.: Recommendation for the modelling of 3D non-linear analysis of RC beam tests. Computers and Concrete, Vol. 21, Iss. 1, 2018, pp. 11-20, DOI:10.12989/cac.2018.21.1.011.
- [12] AUGUSTIN, T. - FILLO, L. - HALVONIK J. - MARCIS, M.: Punching resistance of flat slabs with openings - experimental investigation, Solid State Phenomena, Vol. 272, 2018, pp. 41-46.10.4028/www.scientific.net/SSP.272.41
- [13] VIDA, R. - HALVONIK, J.: Shear assessment of concrete bridge deck slabs, Key Engineering Materials vol. 738, 2017, pp. 110-119, DOI:10.4028/www.scientific.net/KEM.738.110.10.4028/www.scientific.net/KEM.738.110
- [14] SUCHARDA, O. - BROZOVSKY, J. - MIKOLASEK, D.: Numerical modelling and bearing capacity of reinforced concrete beams, Key Engineering Materials, Vol. 577-578, 2014, pp. 281-284, DOI:10.4028/www.scientific.net/KEM.577-578.281.10.4028/www.scientific.net/KEM.577-578.281
- [15] SUCHARDA, O. – KUBOSEK, J.: Modelling and analysis of reinforced concrete beams, Key Engineering Materials, Vol. 662, 2015, pp. 81-84, DOI:10.4028/www.scientific.net/KEM.662.81.10.4028/www.scientific.net/KEM.662.81
- [16] WIECZOREK, B.: Numerical Model of the Load-Bearing Capacity of the Bottom Reinforcement Bars Passing over the Column, Procedia Engineering, Vol. 190, 2017, pp. 660-667, DOI:10.1016/j.proeng.2017.05.394.10.1016/j.proeng.2017.05.394
- [17] ZIENKIEWICZ, O.C. - TAYLOR, R.L.: The Finite Element Method, Fifth edition. Butterworth-Heinemann. Oxford, 2000.
- [18] HOSTETTER, G. - MANG H.A.: Computational Mechanics of Reinforced Concrete Structures. Braunschweig/Wiesbaden: Vieweg-Verlag, 1995, 366 p.
- [19] HEGGER, J. - RICKER, M. - ULKE, B. - ZIEGLER, M.: Investigations on the punching behaviour of reinforced concrete footings. Engineering Structures, Vol. 29, 2007, pp. 2233–2241, DOI:10.1016/j.engstruct.2006.11.012.10.1016/j.engstruct.2006.11.012
- [20] HEGGER, J. - SHERIF, G.A. - RICKER, M.: Experimental investigations on punching behavior of reinforced concrete footings. ACI Structural Journal, Vol. 103, 2006, pp. 604–613.10.14359/16437
- [21] HOANG, L. C. - POP, A.: Punching shear capacity of reinforced concrete slabs with headed shear studs. Magazine of Concrete Research, Vol. 68, Iss. (3), 2016, pp. 118–126.10.1680/macr.15.00033
- [22] HALVONIK, J. - FILLO, L.: The maximum punching shear resistance of flat slabs. Procedia Engineering, Vol. 65, 2013, pp. 376–381.10.1016/j.proeng.2013.09.058
- [23] EN 1992-1-1 (2004) (English): Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings.
- [24] BUCHTA, V. – JANULIKOVA, M. - FOJTIK, R.: Experimental Tests of Reinforced Concrete Foundation Slab. Procedia Engineering, Vol. 114, 2015, pp. 530-537, DOI:10.1016/j.proeng.2015.08.102.10.1016/j.proeng.2015.08.102
- [25] CEB-FIP Model Code 1990, First Draft, Comittee Euro-International du Beton, Bulletin d’information No. 195, 196, Mars.