References
- P.J. Rae, D.M. Dattelbaum, Poly(tetrafluoroethylene) properties (PTFE) in compression polymer, 45 (2004), pp. 7615-7625
- P.J. Rae, E.N. Brown, Poly(tetrafluoroethylene) properties (PTFE) in tension polymer, 46 (2005), pp. 8128-8140
- A. Hernández-Jimánez, J. Hernández-Santiago, A. Macias-García, J. Sánchez-González Relaxation mode in PMMA and PTFE assembly by the Maxwell Polym fractional model. Test, 21 (2002), pp. 325-331
- Z. Zhang, X. Chen, Y. Wang, Uniaxial ratchet behavior of polytetrafluoroethylene to polym at elevated temperatures. Test., 29 (2010), pp. 352-357
- Z. Zhang, X. Chen, Multiaxial ratchet behavior of PTFE at room temperature Polym. Test., 28 (2009), pp. 288-295
- E.N. Brown, D.M. Dattelbaum, The Role of the Crystalline Phase on Fracture and Evolution of Polytetrafluoroethylene (PTFE) Polymer Microstructure, 46 (2005), pp. 3056-3068
- C. Ebert, W. Hufenbach, A. Langkamp, M. Gude, Modeling of Strain Behavior Dependent on the Strain Rate of Polypropylene Polym. Test., 30 (2011), pp. 183-187
- J. Richeton, S. Ahzi, K.S. Vecchio, F.C. Jiang, R.R. Adharapurapu, The Influence of Temperature and Strain Rate on the Mechanical Behavior of Three Amorphous Polymers: Characterization and Modeling of Compressive Elastic Stress Int. J. Solids Struct., 43 (2006), pp. 2318-2335
- B. Farrokh, A.S. Khan, A Strain Rate-Dependent Performance Criterion for Isotropic Polymers: Low to High Euro Charge Rates J. Mech. A/Solids, 29 (2010), pp. 274-282
- Erhard Krempl, Fazeel Khan, Rate-Dependent Deformation Behavior (Time): An Overview of Some Properties of Solid Metals and Polymers Int. J. Plasticity, 19 (2003), pp. 1069-1095
- Qin-Zhi Fang, T.J. Wang, H.G. Beom, H.P. Zhao, High Velocity-Dependent Deformation Behavior of PC/ABS Polymer, 50 (2009), pp. 296-304
- M. Wendlandt, T.A. Tervoort, U.W. Suter, The Nonlinear and Velocity-Dependent Work Hardening Behavior of Polymer Glass, 46 (2005), pp. 11786-11797
- J.S. Bergstrom, L.B. Hilbert Jr., A Constitutive Model for Predicting Thermomechanical Behavior at Large Deformation of Mech. Fluoropolymers Mater., 37 (2005), pp. 899-913
- C.Y. Tang, C.P. Tsui, W. Shen, C.C. Li, L.H. Peng, Modeling the Nonlinear Stress-Strain Behavior of HIPS with Crack Damage in the Tensile Load-Discharge Process, Polym. Test., 20 (2001), pp. 15-28
- F. Za'ri, M. Na't-Abdelaziz, J.M. Gloaguen, J.M. Lefebvre, Modeling the Elasto-Viscoplastic Deterioration Behavior of Vitreous Polymers, Int. J. Plasticity, 24 (2008), pp. 945-965
- C. G'Sell, J.M. Hiver, A. Dahoun, Experimental characterization of strain deterioration in solid polymers under stress and its interrelation with shrinkage, Int. J. Solids Struct., 39 (2002), pp. 3857-3872
- E.N. Brown, P.J. Rae, E.B. Orler, Influence of Temperature and Strain Rate on the Constitutive and Harmful Responses of Polychlorinated Trifluoroethylene (PCTFE, Kel-F 81), Polymer, 47 (2006), pp. 7506-7518
- Standard Test Method for Tensile Properties of Plastics. ASTM – D 638–08.
- N.K. Naik_, Y. Pearl, Mechanical Behavior of Acrylic Under High-Speed Tensile Load, Polym. Test., 27 (2008), pp. 504-512
- M. Schoßg, C. Bieröel, W. Grellmann, Thomas Mecklenburg, Mechanical Behavior of Glass Fiber Reinforced Thermoplastics Under High Deformation Rates, Polym. Test., 27 (2008), pp. 893-900
- A.D. Mulliken, M.C. Boyce, Mechanics of velocitydependent elastic-plastic deformation of small to tall vitreous polymers, Int. J. Solids Struct., 43 (2006), pp. 1331-1356
- L.C.S. Nunes, Mechanical Characterization of Polytetrafluoroethylene Polymer Using the Full-Field Displacement Method, Opt. Lasers Eng., 49 (2011), pp. 640-646
- H.S. da Costa Mattos, G. Minak, F. Di Gioacchino, A. Soldà, Modeling the superplastic behavior of Mg alloy sheets under stress using a theory of continuous deterioration, Mater. Design, 30 (2009), pp. 1674-1679
- H.S. da Costa Mattos, I.N. Bastos, J.A.C.P. Gomes, A Simple Model for Slow Deformation Rate and Constant Load Corrosion Testing of Austenitic Stainless Steel in an Acidic Aqueous Solution Containing Sodium Chloride, Corros. Sci., 50 (2008), pp. 2858-2866
- H.S. da Costa Mattos, A.H. Monteiro, E.M. Sampaio, Modeling the Strength of Soldered Butt Joints, Compos. B. Eng., 41 (2010), pp. 654-662
- H.S. da Costa-Mattos, F.E.G. Chimisso, Modeling Creep Tests in HMPE Fibers Used in Ultra-Deep Mooring Cables, Int. J. Solids Struct., 48 (2011), pp. 144-152
- K. Levenberg, A Method for Solving Certain Problems in the Smallest Squares, Quart. Appl. Math., 2 (1944), pp. 164-168.
- Alexis Negrea, Maria Cristiana Enescu, Elena Valentina Stoian and Ivona Petre, Virtual Studies on the Behavior of Polyurethane on Mechanical Stresses Scientific Bulletin of Valahia University - Materials and Mechanics VOLUME 18 (2022): ISSUE 18 (APRIL 2022) Apr 30, 2022
- M.C.Enescu, Simulation de résistence à la traction et compression dans un composite macromoléculaire, U.P.B. Sci. Bull., Series B, 72, 3, 2010, p.211
- Enescu, M.C., Stoian, E.V., Negrea, A., Petre, I., Rusanescu, C.O., Experimental and virtual studies in mechanical applications of PP-RCT pipes with armored materials Materiale Plastice, 2019, 56(2), pp. 324–329
- M.C. Enescu, D. Ungureanu, E.V. Stoian, Simulation of tensile and compression strength of a Macromolecular composite, The Scientific Bulletin of Valahia University Materials and Mechanics, 1(5), 2007, p.19.