State-of-the-Art of 3D Printing in Remanufacturing Within Industry 4.0
References
- Ahn S.-H., Wright P., Montero M., Odell D., Roundy S., Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyp. J., 8, 4, 258-266 (2002).
- Bolaños Arriola J., van Oudheusden A., Flipsen B., Faludi J., 3D Printing for Repair Guide, TU Delft Open Publishing, Delft, Netherlands, 2022.
- Brenken B., Barocio E., Favaloro A., Kunc V., Pipes B., Fused Filament Fabrication of Fiber-Reinforced Polymers: A Review, Addit. Manuf., 21, 1-16 (2018).
- British Standards Institution, Design for Manufacture, Assembly, Disassembly and Endof-Life Processing (MADE), BS 8887-220:2010, United Kingdom, 2010.
- Butzer S., Kemp D., Steinhilper R., Schötz S., On the Induction Motor Modeling in Static Analysis of the Power System Voltage Stability, Proc. of the IEEE European Technology and Engineering Management Summit, E-TEMS 11-13 September 2016, Frankfurt am Main, Germany, IEEE, 1-6.
- Chang M.M.L., Ong S.K., Nee A.Y.C., Approaches and Challenges in Product Disassembly Planning for Sustainability, Procedia CIRP, 60, 506-511 (2017).
- Chitariu D.F., Eduțanu F., Păduraru E., Chifan F., Oancea L., Mihai C.-G., Bișoc C., Hrib F.-V., Creativity in Industry 5.0, Proc. of the XXVIII International Conference “INVENTICA 2024. Science of Creativity” July 4th 2024, Iași, Romania, Sciendo, 012.
- Dipu M.N., An overview of additive manufacturing technology: Generic steps, fundamental categories, advantages, disadvantages, and applications, Next Res., 2, 100909 (2025).
- Dizon J.R., Gache C.C., Cascolan H.M., Cancino L., Advincula R., Post-Processing of 3D-Printed Polymers, Technologies, 9, 3, 61 (2021).
- Fernandez-Vicente M., Calle W., Ferrándiz S., Conejero A., Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing, 3D Print. Addit. Manuf., 3, 3, 183-192 (2016).
- Gamage J.R., Ijomah W.L., Windmill J., “What makes cleaning a costly operation in remanufacturing?”, in Proc. 11th Global Conf. Sustain. Manuf. (GCSM), Berlin, Germany, 2013, pp. 543-548.
- Gan S.S., Pujawan I.N., Suparno, Remanufacturing of Short Life-cycle Products, Oper. Supply Chain Manag., 7, 1, 13-22 (2014).
- Gao W., Zhang Y., Ramanujan D., Ramani K., Chen Y., Williams C., Wang C.C.L., Shin Y., Zhang S., Zavattieri P., The Status, Challenges, and Future of Additive Manufacturing in Engineering, Comput. Aided Des., 69, 65-89 (2015).
- Gibson I., Rosen D., Stucker B., Khorasani A., Additive Manufacturing Technologies, Springer, Cham, Switzerland, 2020.
- Gopal M., Lemu H., Mosisa E., Sustainable Additive Manufacturing and Environmental Implications: Literature Review, Sustainability, 15, 1, 504 (2023).
- Hatcher G.D., Ijomah W.L., Windmill J.F.C., Design for remanufacture: a literature review and future research needs, J. Clean. Prod., 19, 17–18, 2004-2014 (2011).
- Hermann M., Pentek T., Otto B., Design Principles for Industrie 4.0 Scenarios, Proc. Hawaii Int. Conf. Syst. Sci. (HICSS), 3928-3937 (2016).
- Jayakrishna K., V.K.E.K., Raj S.A., Kulatunga A.K., Sultan M.T.H., Davim J.P. (Eds.), Sustainable Manufacturing for Industry 4.0: An Augmented Approach, CRC Press, Boca Raton, 2020.
- Jazdi N., Cyber physical systems in the context of Industry 4.0, Proc. of the IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 22-24 May 2014, Cluj-Napoca, Romania, IEEE, 1-4.
- Kantaros A., Zacharia P., Drosos C., Papoutsidakis M., Pallis E., Ganetsos T., Smart Infrastructure and Additive Manufacturing: Synergies, Advantages, and Limitations, Appl. Sci., 15, 4, 3719 (2025).
- Kerin M., Pham D., A Review of Emerging Industry 4.0 Technologies in Remanufacturing, J. Clean. Prod., 237, 117805 (2019).
- Lasi H., Fettke P., Kemper H.-G., Feld T., Hoffmann M., Industry 4.0, Bus. Inf. Syst. Eng., 6, 239–242 (2014).
- Mboli J.S., Thakker D., Mishra J.L., An Internet of Things‐enabled decision support system for circular economy business model, Softw. Pract. Exper., 52, 3, 772-787 (2022).
- Müller J.M., Business model innovation in small- and medium-sized enterprises, J. Manuf. Technol. Manage., 30, 8, 1127-1142 (2019).
- Nikishina L.B., Industry 4.0: history of emergence, development, prospects of transformation into Industry 5.0, E3S Web Conf., 458, 06023 (2023).
- Pramanik P.K.D., Mukherjee B., Pal S., Upadhyaya B.K., Dutta S., Ubiquitous Manufacturing in the Age of Industry 4.0: A State-of-the-Art Primer, A Roadmap to Industry 4.0: Smart Production, Sharp Business and Sustainable Development, ch. 5, Springer, Cham, Switzerland, 73–113 (2019).
- Rajab S., Afy-Shararah M., Salonitis K., Using Industry 4.0 Capabilities for Identifying and Eliminating Lean Wastes, Procedia CIRP, 107, 21-27 (2022).
- Shi Z., Optimal Remanufacturing and Acquisition Decisions in Warranty Service Considering Part Obsolescence, Comput. Ind. Eng., 135, 1-2, 766-779 (2019).
- Suryo Wasono R., Abd Wahab D., Azman A.H., Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives, Processes, 7, 11, 802 (2019).
- Tien J., Toward the Fourth Industrial Revolution on Real-Time Customization, J. Syst. Sci. Syst. Eng., 29, 1-16 (2019).
- Trismawati, Rizky S.A., Handayani D.I., A Comprehensive Approach to Minimize Inventory Costs Using RCM, RCS, and Economic Order Quantity Methods, J. Dev. Res., 8, 1, 62-69 (2024).
- Vaidya S., Ambad P., Bhosle S., Industry 4.0 –A Glimpse, Procedia Manuf., 20, 233-238 (2018).
- van Oudheusden A., Bolaños Arriola J., Faludi J., Flipsen B., Balkenende R., 3D Printing for Repair: An Approach for Enhancing Repair, Sustainability, 15, 6, 5168 (2023).
- Yang L., Kota S., Material Evaluation and Selection Criteria for 3D Printing, J. Stud. Res., 14, 1, Article 8995 (2025).
- Yeshiwas T., Tiruneh A., Sisay M., A review article on the assessment of additive manufacturing, J. Mater. Sci.: Mater. Eng., 20, 306 (2025).
- Zhong R.Y., Xu X., Klotz E., Newman S.T., Intelligent Manufacturing in the Context of Industry 4.0: A Review, Engineering, 3, 5, 616-630 (2017).
Language: English
Page range: 99 - 110
Submitted on: May 19, 2026
Accepted on: May 29, 2026
Published on: Jun 27, 2026
Published by: Gheorghe Asachi Technical University of Iasi
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2026 Gabriel Signeanu, Dragoş-Florin Chitariu, Florin-Daniel Eduţanu, IonuȚ-Alin Bejenaru, Anita Sănducu, published by Gheorghe Asachi Technical University of Iasi
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.