References
- Belous V., Inventions (transl. from Romanian), Asachi Publishing House, Iaşi, 1992.
- Botez I., Stoicev P., Nastas A., Automatizarea proceselor de asamblare, o modalitate importantă de sporire a durabilităţii maşinilor, Intellectus, 1, 77-85 (2013).
- Cornwell P., Concept Maps in the Mechanical Engineering Curriculum, Rose-Hulman Institute of Technology, 1996.
- Leahu C., Hydraulic calculation model – UIR project (transl. from Romanian), Transylvania University, Brașov, 2021.
- Merticaru V., Automation and Robotization of Technological Processes (transl. from Romanian), “Gheorghe Asachi” Technical University, Iași, 2008.
- Michalscheck J., Michalscheck K., Korpela J., Reissner K., Vasko D., Fordenwalt M., Jauquet J., Ericsson M., Wilber A., System and methods for a multi-purpose sensing device for industrial automation equipment, patent US 11740614 B2/2023.
- Nagîț Gh., Technological Innovation (transl. from Romanian), Tehnica-Info Publishing House, Chișinău, 2001.
- Pereverzev P, Aksintseva A.V., Alsigar M.K., Ardashev D.V., Designing optimal automatic cycles of round grinding based on the synthesis of digital twin technologies and dynamic programming method, Mech. Sci., 10, 331–341 (2019).
- Rashid A., Yahya N., Senawi A., Investigation of the Automatic Sorting Machine Based on PLC – Pneumatic System, J. Phys.: Conf. Ser. 2933, 012025 (2025), DOI:10.1088/1742-6596, 2025.
- Vavruska P., Pesice M., Zeman P., Kozlok T., Automated feed rate optimization with consideration of angular velocity according to workpiece shape, Results in Eng., 16, 100762 (2022).
- Voicu M., Introducere în Automatică, Iași, Editura Polirom, 2002.
- Wang Q., Wang Z., Xu R., Gao L., Zhang W., Chen Z., Huang H., Wu X., Automatic detection device and detection method for roller surface of roller press, patent AU 2021239037 B2/2021.
- Wei Z., Ning J., Yang Z., Wang W., Xue H., Automatic step steel plate cutting and welding device, and method thereof, patent US 10821547 B2/2020.
- Wilson J.P., Shen Z., Awasthi U., Bollas G.M., Gupta S., Multi-Objective Optimization for Cost-Efficient and Resilient Machining under Tool Wear, J. Adv. Manuf. Proces. 4, 4, e10140 (2022), https://doi.org:10.1002/amp2.10140.