Glass Wear with Different Powders (Eutalloy Tung Tec, Metco 82VF-NS and MTS 8013)
References
- Belkhir N., Bouzid D., Herold V., Wear behavior of the abrasive grains used in optical glass polishing, Volume 209, Issue 20, 6140-6145, 2009.
- Chizhik P., Friedrichs M., Dietzel D., Schirmeisen A., Tribological Analysis of Contacts Between Glass and Tungsten Carbide Neat the Glass Transition Temperature, Tribology Letters, Volume 68, 127, 2020.
- Istrate B., Munteanu C., Matei M.N., Oprisan B., Chicet D., Earar K., Influence of ZrO2-Y2O3 and ZrO2-CaO coatings on microstructural and mechanical properties on Mg-1,3Ca-5,5Zr biodegradable alloy, IOP Conference Series: Materials Science and Engineering, Volume 133, ICIR Euroinvent, 2016.
- Kumar A., Boy J., Zatorski R., Stephenson L.D., Thermal Spray and Weld Repair Alloy for the Repair of Cavitation Damage in Turbines and Pumps: A Technical Note, Journal of Thermal Spray Technology, 14:177-182.
- Lee S.J., Kim G.M., Kim C.L., Friction and wear reduction effect of glass bubbles embedded in PDMS surface, Journal of Mechanical Science and Technology, 36(4) (2022).
- Mens J.W.M., De Gee A.W.J., Friction and wear behaviour of 18 polymers in contact with steel in environments of air and water, Wear, Volume 149, 1991.
- Mohan N., Mahesha C.R., Raja R., Tribo-mechanical behaviour of SiC filled glass-epoxy composites at elevated temperatures, International Journal of Engineering, Science and Technology, (5) 44-56, 1970.
- Usta U., Yildiz B.K., Mechanical Properties of ZTA-Cr2O3 Ceramic Composites Prepared with Nano and Micron Sized of Cr2O2, Powder on Different Ratios, OKU Journal of The Insitute of Science and Technologym 6(Suppl): 315-327, 2023.
- Yesica B., Fernando B., Liliana G., Esteban A., Densification and mechanical properties of ZrO2-CaAl4O7 composites obtained by reaction sintering, International Journal of Materials Research, 107(9) 851-859, 2016.
- Zhao Y., Liu R., Yah F., Zhang D., Liu J., Windblown sand-induced degradation of glass panels in curtain walls, Materials, 14(3) 1-12, (2021).
Language: English
Page range: 35 - 44
Submitted on: Nov 24, 2024
Accepted on: Dec 14, 2024
Published on: Jan 20, 2025
Published by: Gheorghe Asachi Technical University of Iasi
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2025 Bogdan Chiriac, Elena Adelina Chiriac, George Achitei, Dumitru Olaru, published by Gheorghe Asachi Technical University of Iasi
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.