Employing High Speed Machining on a Complex Part

Rădulescu, Bruno; Rădulescu, Mara-Cristina

doi:10.2478/bipcm-2023-0019

.blurhash-client-img { display: none !important; }

Employing High Speed Machining on a Complex Part

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

Volume 69 (2023): Issue 2 (June 2023)

By: Bruno Rădulescu and Mara-Cristina Rădulescu

Open Access

|Oct 2023

Abstract

This paper presents the influence of high speed milling process over the time savings. High-speed machining is used in all areas of business. It can be used for mass processing or for making moulds for various applications.

References

Keyal P., Optimal ball-end and fillet-end mills selection for 3-axis finish machining of point-based surface, International Journal of CAD/CAM, vol. 7, 2007.
Search in Google Scholar Back to article
Khani R.A., Fakhrabadi N., Mahdavinejad M.M.S.D., Optimization of milling parameters using artificial neural network and artificial immune system, Journal of Mechanical Science and Technology, vol. 26, pp. 4097-4104, 2012.
Search in Google Scholar Back to article
Osan A., Cosma M., Nasui V., Milling convex surfaces with toroidal cutting edge, International Conference on Innovative Ideas in Science and Social and Technological Development, 2018.
Search in Google Scholar Back to article
Seguy A., From the spindle speed selection to the spindle speed variation for chatter control in thin wall milling: modelling and experiments (in French), PhD University of Toulouse, France (2008).
Search in Google Scholar Back to article
Zhang H., Jackson M.J., Ni J., Stability analysis on spindle speed variation method formachining chatter suppression, International Journal of Machining and Machinability of Materials 5, pp. 107-128 (2009).
Search in Google Scholar Back to article

DOI: https://doi.org/10.2478/bipcm-2023-0019 | Journal eISSN: 2537-4869 | Journal ISSN: 1011-2855

Journal RSS Feed

Language: English

Page range: 109 - 114

Submitted on: Jul 14, 2023

Accepted on: Jul 31, 2023

Published on: Oct 13, 2023

Published by: Gheorghe Asachi Technical University of Iasi

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

High Speed Machining,

the influence of feed on machining,

part design,

cutting speed,

productivity and quality gained

Related subjects:

Engineering,

Mechanical engineering,

Fundamentals of mechanical engineering,

Thermodynamics,

Production technology,

Mechatronics and automotive

© 2023 Bruno Rădulescu, Mara-Cristina Rădulescu, published by Gheorghe Asachi Technical University of Iasi
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous article Volume 69 (2023): Issue 2 (June 2023)Next article