The Variation of Temperature with the Heights of 3D Printed ABS Parts

.blurhash-client-img { display: none !important; }

Open Access

|Jul 2023

This paper presents the influence of the temperature on vertical to the part that has more than 100 mm.

References

Gershenfeld N., How to Make Almost Anything. The Digital Fabrication Revolution, Foreign Affairs, Vol. 91, No. 6, pp. 43-57 (2012)
Search in Google Scholar Back to article
Hwang S., Reyes E.I., Moon K.-S., Rumpf R.C., Kim N.S., Thermo-mechanical characterization of metal/polymer composite filaments and printing parameter study for fused deposition modeling in the 3D printing process, J. Electron. Mater. 44, 771-777 (2015).
Search in Google Scholar Back to article
Savu I.D., Savu S.V., Simion D., Sîrbu N.-A., Ciornei M., Ratiu S.A., PP in 3D printing ‒ Technical and economic aspects, Mat. Plast. 56, 931-936 (2019).
Search in Google Scholar Back to article
Xu W., Jambhulkar S., Zhu Y., Ravichandran D., Kakarla M., Vernon B., Lott B., Cornella J., Shefi O., Miquelard G., Yang Y., Song K., 3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications, Small, (2021).
Search in Google Scholar Back to article
**_* https://prusament.com/media/2022/10/ASA_Prusament_TDS_2022_16_EN.pdf
Search in Google Scholar Back to article

DOI: https://doi.org/10.2478/bipcm-2023-0008 | Journal eISSN: 2537-4869 | Journal ISSN: 1011-2855

Language: English

Page range: 105 - 113

Submitted on: May 17, 2023

Accepted on: May 31, 2023

Published on: Jul 22, 2023

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

© 2023 Bruno Rădulescu, Mara-Cristina Rădulescu, published by Gheorghe Asachi Technical University of Iasi
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.