References
- Baich L., Marie H., Manogharan G.P., Study of Infill Print Design on Production Cost-Time of 3D Printed ABS Parts, Int. J. of Rapid Manuf., 5, Nos 3/4, 308-319, (2015).10.1504/IJRAPIDM.2015.074809
- Gibson I., Rosen D.W., Stucker B., Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, 2nd Ed., Springer, New York, 147-173, 2015.10.1007/978-1-4939-2113-3_6
- Hermann S, 2019, The Effect of Extrusion width on Strength and Quality of 3d Prints, CNC Kitchen, viewed: February 02, 2020,
- Rajpurohit S.R., Dave H.K., Analysis of Tensile Strength of a Fused Filament Fabricated PLA Part Using an Open-Source 3D Printer, The Int. J. of Adv. Manuf. Tech., 101, 1525-1536 (2019).
- Redwood B., Schöffer F., Garret B., The 3D Printing Handbook: Technologies, Design and Applications, 1st Ed., 3D Hubs B.V., Amsterdam, 34-70, 2017.
- Soares B. J., Finamor J., Silva F.P., Roldo L. Candido L.H., Analysis of the Influence of Polylactic Acid (PLA) Colour on FDM 3D Printing Temperature and Part Finishing, Rapid Prototyping J., 24, No. 8, 1305-1316 (2018).
- Weiner H., Fused Filament Fabrication – Simply Explained, ALL3DP, Viewed: February 05, 2020, https://all3dp.com/2/fused-filament-fabrication-fff-3d-printing-simply-explained/ (2020).
- Zuza M., Everything About Nozzles with a Different Diameter, PrusaPrinters, Viewed: February 09, 2020, https://blog.prusaprinters.org/everything-about-nozzles-with-a-different-diameter/ (2018).