References
- A. Kazemian, Xiao Yuan, Ryan Meier and Behrokh Khoshnevis, Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing. 3D Concrete Printing Technology 2019, Pages 13-35.
- A. Kazemian, X. Yuan, R. Meier, E. Cochran, B. Khoshnevis, Construction-scale 3D printing: shape stability of fresh printing concrete, 12th International Manufacturing Science and Engineering Conference (MSEC 2017), Los Angeles, CA, 2017.
- Biranchi Panda and Ming Jen Tan, Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing, Ceramics International, https://doi.org/10.1016/j.ceramint.2018.03.031.
- C. Gosselin, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger, P. Morel, Largescale 3D printing of ultra-high-performance concrete–a new processing route for architects and builders, Mater. Des. 100 (2016) 102–109.
- G. Ma, L. Wang, A critical review of preparation design and workability measurement of concrete material for largescale 3D printing, Front. Struct. Civil Eng. (2017) 1_19.
- I. Agustí-Juan, F. Müller, N. Hack, T. Wangler, G. Habert, Potential benefits of digital fabrication for complex structures: environmental assessment of a robotically fabricated concrete wall, J. Clean. Prod. 154 (2017) 330–340, https://doi.org/10.1016/j.jclepro.2017.04.002.
- J. Buchli, M. Giftthaler, N. Kumar, M. Lussi, T. Sandy, K. D¨orfler, N. Hack, Digital in situ fabrication - challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond, Cement Concr. Res. 112 (2018) 66–75, https://doi.org/10.1016/j.cemconres.2018.05.013.
- M. A. Khan, Mix suitable for concrete 3D printing: A review, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.03.825.
- Ma, Guowei, Li Wang, A critical review of preparation design and workability measurement of concrete material for largescale 3D printing, Front. Struct. Civil Eng. 12 (3) (2018) 382–400.
- P. Wu, J. Wang, X. Wang, A critical review of the use of 3-D printing in the construction industry, Autom. Constr. 68 (2016) 21–31;
- R.A. Buswell, W.L. de Silva, S.Z. Jones, J. Dirrenberger, 3D printing using concrete extrusion: A roadmap for research, Cem. Concr. Res. 112 (2018) 37–49.
- S.C. Paul, Y.W.D. Tay, B. Panda, M.J. Tan, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch. Civ. Mech. Eng. 18 (1) (2018) 311–319.
- SR EN 12390-2 Încercări pe beton întărit Partea 2: Pregătirea și păstrarea epruvetelor pentru încercări de rezistență.
- V.N. Nerella, S. Hempel, V. Mechtcherine, Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing, Construct. Build. Mater. 205 (2019) 586–601, https://doi.org/10.1016/j.con.build.mat.2019.01.23.
- Zhixin Liu, Mingyang Li, Yiwei Weng, Teck Neng Wong, Ming Jen Tan, Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing, Construction and Building Materials 198 (2019) 245–255.