References
- Adil G., Kevern J.T., Mann D., Influence of silica fume on mechanical and durability of pervious concrete, Construction and Building Materials, 247, 118453, 2020, https://doi.org/10.1016/j.conbuildmat.2020.118453.
- Behnood A., Ziari H., Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures, Cement and Concrete Composites, 30, 106-112, 2008, doi: 10.1016/j.cemconcomp.2007.06.003.
- Bajpai R., Choudhary K., Srivastava A., Sangwan K.S., Singh M., (2020), Environmental impact assessment of fly ash and silica fume based geopolymer concrete. Journal of Cleaner Production, 254, 120147. doi: 10.1016/j.jclepro.2020.120147.
- Chung C.W., Shon C.S., Kim Y.S., Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze-thaw cycles, Construction and Building Materials, 24, 1739-1745, 2010, doi: 10.1016/j.conbuildmat.2010.02.015.
- Gökçe H.S., Hatungimana D., Ramyar K., Effect of fly ash and silica fume on hardened properties of foam concrete, Construction and Building Materials, 194, 1-11, 2019, doi: 10.1016/j.conbuildmat.2018.11.036.
- Guo Y.L., Liu X.Y. Hu Y.P., Study on the influence of fly ash and silica fume with different dosage on concrete strength, E3S Web of Conferences, 237, 03038, 2021, https://doi.org/10.1051/e3sconf/202123703038.
- Khan M.I., Siddique R., Utilization of silica fume in concrete: Review of durability properties, Resources, Conservation and Recycling, 57, 30-35, 2011, https://doi.org/10.1016/j.resconrec.2011.09.016.
- Kumar S., Rai B., (2022), Synergetic effect of fly ash and silica fume on the performance of high volume fly ash self-compacting concrete. Journal of Structural Integrity and Maintenance, 7, 61-74, 2022, https://doi.org/10.1080/24705314.2021.1892571.
- Lu B., Li M., Qian S., Leong K.F., Tan M.J., Develop cementitious materials incorporating fly ash cenophere for spray‑based 3D printing, Proceedings of the 3rd International Conference on Progress in Additive Manufacturing, 38‑43, 2018, doi:10.25341/D4RG6Q.
- Lou Y., Khan K., Amin M.N., Ahmad W., Deifalla A.F., Ahmad A., Performance characteristics of cementitious composites modified with silica fume: A systematic review, Case Studies in Construction Materials, 18, e01753, 2023, https://doi.org/10.1016/j.cscm.2022.e01753.
- Mazloom M., Ramezanianpour A., Brooks J., Effect of silica fume on mechanical properties of high-strength concrete, Cement and Concrete Composites, 26, 347–357, 2004, https://doi.org/10.1016/S0958-9465(03)00017-9.
- Mustapha F.A., Sulaiman A., Mohame, R.N., Umara S.A., The effect of fly ash and silica fume on self-compacting high-performance concrete, Materials Today: Proceedings, 39, 965-969, 2021, doi: 10.1016/j.matpr.2020.04.493.
- Nath P., Sarker P., Effect of fly ash on the durability properties of high strength concrete, Procedia Engineering, 14, 1149-1156, 2011, https://doi.org/10.1016/j.proeng.2011.07.144.
- Nayak D.K., Abhilash P.P., Singh R., Kumar R., Kumar V., Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies. Cleaner Materials, 6, 100143, 2022, https://doi.org/10.1016/j.clema.2022.100143.
- Onyelowe K.C., Ebid A.M., Riofrio A., Soleymani A., Baykara H., Kontoni D.P.N., Mahdi H.A., Jahangir H., Global warming potential-based life cycle assessment and optimization of the compressive strength of fly ash-silica fume concrete; environmental impact consideration, Frontiers in Built Environment, 8, 992552, 2022, https://doi.org/10.3389/fbuil.2022.992552.
- Poon C.S., Lam L., Wong Y.L., A study on high strength concrete prepared with large volumes of low calcium fly ash, Cement and Concrete Research, 30, 447-455, 2000. https://doi.org/10.1016/S0008-8846(99)00271-9.
- Pan Z., Zeng X., Hu Z., Effect of fly ash and silica fume on mechanical properties of high-performance FRCC, IOP Conference Series: Materials Science and Engineering, 562, 012048, 2019, doi:10.1088/1757-899X/562/1/012048.
- Romanian Standard Association, SR EN 12390-6:2010 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens, Bucharest, Romania, 2010.
- Romanian Standard Association, SR EN 450-1:2012. Fly ash for concrete. Part 1: Definitions, conditions and quality control, Bucharest, Romania, 2012.
- Romanian Standard Association, SR EN 12390-2:2019 Testing hardened concrete. Part 2: Making and curing specimens for strength tests, Bucharest, Romania, 2019.
- Romanian Standard Association, SR EN 12390-5:2019 Testing hardened concrete - Part 5: Flexural strength of test specimens, Bucharest, Romania, 2019.
- Romanian Standard Association, SR EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens, Bucharest, Romania, 2019.
- Ramezanianpour A.A., Malhotra V.M., Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume, Cement and Concrete Composites, 17, 125-133, 1995, https://doi.org/10.1016/0958-9465(95)00005-W.
- Shmlls M., Bozsaky D., Horváth T., Compressive, flexural and splitting strength of fly ash and silica fume concrete, Pollack Periodica, 17, 50-55, 2022, https://doi.org/10.1556/606.2021.00448.
- Wu W., Wang R., Zhu C., Meng Q., The effect of fly ash and silica fume on mechanical properties and durability of coral aggregate concrete, Construction and Building Materials, 185, 69-78, 2018, https://doi.org/10.1016/j.conbuildmat.2018.06.097.
- Wang L., Jin M., Guo F., Wang Y., Tang S., Pore structural and fractal analysis of the influence of fly ash and silica fume on the mechanical property and abrasion resistance of concrete, Fractals, 29, 2140003, 2021, https://doi.org/10.1142/S0218348X2140003X.
- Zhang P., Li Q., Effect of silica fume on durability of concrete composites containing fly ash, Science and Engineering of Composite Materials, 20, 57-65, 2012, https://doi.org/10.1515/secm-2012-0081.
- Zhang Y., Zeng R., Lv L., (2017), Study of Static Mechanical Properties of Concrete Mixed with Silica Fume and Fly Ash, In International Conference on Mechanics and Materials Science, 1197-1204, Springer, Singapore, 2017, https://doi.org/10.1142/9789813228177_0154.