Have a personal or library account? Click to login
Experimental Investigation on the Coating of Nickel-Base Super Alloy Using Wire Flame Spraying Cover

Experimental Investigation on the Coating of Nickel-Base Super Alloy Using Wire Flame Spraying

Acta Universitatis Sapientiae, Electrical and Mechanical Engineering
Volume 14 (2022): Issue 1 (December 2022)
By: Noureddine Menasri,  Said Zergane,  Noureddine Aimeur and  Abdelhamid Saci  
Open Access
|Jan 2023

References

  1. [1] Mudgal, D., et al., “Corrosion behavior of bare, Cr3C2-25%(NiCr), and Cr3C2-25%(NiCr)+ 0.4% CeO2-coated superni 600 under molten salt at 900° C”, Journal of materials engineering and performance, Vol. 23, no. 11, pp. 3805–3818, 2014. DOI: https://doi.org/10.1007/s11665-014-1177-3.10.1007/s11665-014-1177-3
    Search in Google ScholarBack to article
  2. [2] Kumar, S., et al., “Cyclic oxidation behavior of bare and Cr3C2-25 (NiCr) coated super alloy at elevated temperature”, Adv. Mater. Lett, Vol. 4, no. 10, pp. 754–761, 2013. DOI: https://doi.org/10.5185/amlett.2013.2428.10.5185/amlett.2013.2428
    Search in Google ScholarBack to article
  3. [3] Yang, Q., Xing, A., and Zhanqiang, L., “Machining performance and tool wear of coated carbide inserts in high speed turning powder metallurgy nickel-base superalloy”, in 2010 WASE International Conference on Information Engineering, IEEE, 2010, pp. 71–74.10.1109/ICIE.2010.195
    Search in Google ScholarBack to article
  4. [4] Mazur, Z., et al., “Failure analysis of a gas turbine blade made of Inconel 738LC alloy”, Engineering failure analysis, Vol. 12, no. 3, pp. 474–486, 2005. DOI: https://doi.org/10.1016/j.engfailanal.2004.10.002.10.1016/j.engfailanal.2004.10.002
    Search in Google ScholarBack to article
  5. [5] Li, S.-L., Qi, H.-Y., and Yang, X.-G., “Oxidation-induced damage of an uncoated and coated nickel-based superalloy under simulated gas environment”, Rare Metals, Vol. 37, no. 3, pp. 204–209, 2018. DOI: https://doi.org/10.1007/s12598-017-0931-8.10.1007/s12598-017-0931-8
    Search in Google ScholarBack to article
  6. [6] Alidokht, S. A. and Chromik, R. R., “Sliding wear behavior of cold-sprayed Ni-WC composite coatings: Influence OF WC content”, Wear, Vol. 477, pp. 203792, 2021. DOI: https://doi.org/10.1016/j.wear.2021.203792.10.1016/j.wear.2021.203792
    Search in Google ScholarBack to article
  7. [7] Gibson, G., et al., “Influence of shot peening on high-temperature corrosion and corrosion-fatigue of nickel based superalloy 720Li”, Materials at High Temperatures, Vol. 33, no. 3, pp. 225–233, 2016, DOI: https://doi.org/10.1080/09603409.2016.1161945.10.1080/09603409.2016.1161945
    Search in Google ScholarBack to article
  8. [8] Aouici, S., et al., “Corrosion Resistance of Coatings Produced by Spraying Powders Under a Laser Beam in a Saline Environment NaCl 3% by the Electrochemical Method”, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, Vol. 12, no. 1, pp. 105–116, 2020.10.2478/auseme-2020-0008
    Search in Google ScholarBack to article
  9. [9] Rachidi, R., El Kihel, B., and Delaunois, F., “Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying”, Materials Science and Engineering: B, Vol. 241, pp. 13–21, 2019. DOI: https://doi.org/10.1016/j.mseb.2019.02.002.10.1016/j.mseb.2019.02.002
    Search in Google ScholarBack to article
  10. [10] Redjdal, O., et al., “Characterization of thermal flame sprayed coatings prepared from FeCr mechanically milled powder”, Journal of Materials Processing Technology, Vol. 213, no. 5, pp. 779-790, 2013, DOI: https://doi.org/10.1016/j.jmatprotec.2012.11.018.10.1016/j.jmatprotec.2012.11.018
    Search in Google ScholarBack to article
  11. [11] Amokrane, B. M., et al., “Microstructural and mechanical properties of Ni-base thermal spray coatings deposited by flame spraying”, Metallurgical and materials transactions B, Vol. 42, no. 5, pp. 932–938, 2011, DOI: https://doi.org/10.1007/s11663-011-9551-0.10.1007/s11663-011-9551-0
    Search in Google ScholarBack to article
  12. [12] Bradai, M. A., et al., “Study of microstructure, phases and microhardness of metallic coatings deposited by flame thermal spray”, Journal of Materials Processing Technology, Vol. 200, no. 1–3, pp. 410–415, 2008, DOI: https://doi.org/10.1016/j.jmatprotec.2007.08.048.10.1016/j.jmatprotec.2007.08.048
    Search in Google ScholarBack to article
  13. [13] Lunn, G. D., Riley, M., and McCartney, D., “A study of wire breakup and in-flight particle behavior during wire flame spraying of aluminum”, Journal of Thermal Spray Technology, Vol. 26, no. 8, pp. 1947–1958, 2017, DOI: https://doi.org/10.1007/s11666-017-0639-1.10.1007/s11666-017-0639-1
    Search in Google ScholarBack to article
  14. [14] Bhosale, D. G., et al., “High temperature solid particle erosion behaviour of SS 316L and thermal sprayed WC-Cr3C2–Ni coatings”, Wear, Vol. 462, pp. 203520, 2020. DOI: https://doi.org/10.1016/j.wear.2020.203520.10.1016/j.wear.2020.203520
    Search in Google ScholarBack to article
  15. [15] Liu, W.-H., Shieu, F.-S., and Hsiao, W.-T., “Enhancement of wear and corrosion resistance of iron-based hard coatings deposited by high-velocity oxygen fuel (HVOF) thermal spraying”, Surface and Coatings Technology, Vol. 249, pp. 24–41, 2014, DOI: https://doi.org/10.1016/j.surfcoat.2014.03.041.10.1016/j.surfcoat.2014.03.041
    Search in Google ScholarBack to article
  16. [16] Hardwicke, C. U. and Lau, Y.-C., “Advances in thermal spray coatings for gas turbines and energy generation: a review”, Journal of Thermal Spray Technology, Vol. 22, no. 5, pp. 564–576, 2013, DOI: https://doi.org/10.1007/s11666-013-9904-0.10.1007/s11666-013-9904-0
    Search in Google ScholarBack to article
  17. [17] Adarsha, H., et al., “Investigations on the abrasive wear behaviour of molybdenum coating on SS304 and A36 using HVOF technique”, Materials Today: Proceedings, Vol. 5, no. 11, pp. 25667–25676, 2018, DOI: https://doi.org/10.1016/j.matpr.2018.11.008.10.1016/j.matpr.2018.11.008
    Search in Google ScholarBack to article
  18. [18] Hong, S., et al., “Microstructure and electrochemical properties of nanostructured WC–10Co–4Cr coating prepared by HVOF spraying”, Surface and Coatings Technology, Vol. 235, pp. 582–588, 2013, DOI: https://doi.org/10.1016/j.surfcoat.2013.08.029.10.1016/j.surfcoat.2013.08.029
    Search in Google ScholarBack to article
  19. [19] Szymański, K., et al., “Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers-A review”, Surface and Coatings Technology, Vol. 268, pp. 153–164, 2015, DOI: https://doi.org/10.1016/j.surfcoat.2014.10.046.10.1016/j.surfcoat.2014.10.046
    Search in Google ScholarBack to article
  20. [20] Patil, V., et al., “High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30% SiO2 and NiCrMoFeCoAl-30% Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment”, International Journal of Engineering: Transactions A: Basics, Vol. 35, no. 7, pp. 1416-1427, DOI: https://doi.org/10.5829/ije.2022.35.07a.19.10.5829/IJE.2022.35.07A.19
    Search in Google ScholarBack to article
  21. [21] Kumar, D., Murtaza, Q., and Singh, R., “Sliding wear behavior of aluminum alloy coating prepared by two-wire electric arc spray process”, The International Journal of Advanced Manufacturing Technology, Vol. 85, no. 1, pp. 237–252, 2016, DOI: https://doi.org/10.1007/s00170-015-7920-6.10.1007/s00170-015-7920-6
    Search in Google ScholarBack to article
  22. [22] Lima, C., et al., “Assessment of abrasive wear of nanostructured WC-Co and Fe-based coatings applied by HP-hVOF, flame, and wire arc spray”, Journal of Thermal Spray Technology, Vol. 23, no. 7, pp. 1097–1104, 2014, DOI: https://doi.org/10.1007/s11666-014-0101-6.10.1007/s11666-014-0101-6
    Search in Google ScholarBack to article
  23. [23] Kumar, S., Kumar, M., and Handa, A., “Comparative study of high temperature oxidation behavior and mechanical properties of wire arc sprayed NiCr and NiAl coatings”, Engineering failure analysis, Vol. 106, pp. 104173, 2019, DOI: https://doi.org/10.1007/s11666-014-0101-6.10.1007/s11666-014-0101-6
    Search in Google ScholarBack to article
  24. [24] Yang, Q., Zhao, L., and Patnaik, P., “Erosion performance, corrosion characteristics and hydrophobicity of nanolayered and multilayered metal nitride coatings”, Surface and Coatings Technology, Vol. 375, pp. 763-772, 2019, DOI: https://doi.org/10.1016/j.surfcoat.2019.07.074.10.1016/j.surfcoat.2019.07.074
    Search in Google ScholarBack to article
  25. [25] Kumar, R. and Kumar, S., “Thermal Spray Coating: A Study”, International Journal Of Engineering Sciences & Research Technology, Vol. 7, no. 3, pp. 610–617. DOI: https://doi.org/10.5281/zenodo.1207005.
    Search in Google ScholarBack to article
  26. [26] Pattankude, B. G. and Balwan, A., “A Review On Coating Process”, International Research Journal of Engineering and Technology, Vol. 6, no. 3, pp. 7980–7984, 2019.
    Search in Google ScholarBack to article
  27. [27] Poursaeidi, E., Torkashvand, K., and Mohammadi, M., “Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading”, International Journal Of Engineering. Transactions C: Aspects, Vol. 32, no. 6, pp. 872–876, 2019, DOI: https://doi.org/10.5829/ije.2019.32.06c.11.10.5829/ije.2019.32.06c.11
    Search in Google ScholarBack to article
  28. [28] Thiem, P., et al., “Comparison of microstructure and adhesion strength of plasma, flame and high velocity oxy-fuel sprayed coatings from an iron aluminide powder”, Surface and Coatings Technology, Vol. 324, pp. 498–508, 2017, DOI: https://doi.org/10.1016/j.surfcoat.2017.06.016.10.1016/j.surfcoat.2017.06.016
    Search in Google ScholarBack to article
  29. [29] Goldbaum, D., et al., Review on cold spray process and technology US patents, in Modern Cold Spray, Springer, pp. 403–429. 2015.10.1007/978-3-319-16772-5_12
    Search in Google ScholarBack to article
  30. [30] Suo, X., et al., “Preparation and characterization of magnesium coating deposited by cold spraying”, Journal of Materials Processing Technology, Vol. 212, no. 1, pp. 100-105, 2012, DOI: https://doi.org/10.1016/j.jmatprotec.2011.08.010.10.1016/j.jmatprotec.2011.08.010
    Search in Google ScholarBack to article
  31. [31] Rani, S., Agrawal, A. K., and Rastogi, V., “Failure analysis of a first stage IN738 gas turbine blade tip cracking in a thermal power plant”, Case studies in engineering failure analysis, Vol. 8, pp. 1–10, 2017, DOI: https://doi.org/10.1016/j.csefa.2016.11.002.10.1016/j.csefa.2016.11.002
    Search in Google ScholarBack to article
  32. [32] Schiefler Filho, M., et al., “Influence of process parameters on the quality of thermally sprayed X46Cr13 stainless steel coatings”, Journal of the brazilian society of mechanical sciences and engineering, Vol. 26, no. 1, pp. 98–106, 2004.10.1590/S1678-58782004000100016
    Search in Google ScholarBack to article
  33. [33] Gong, X., et al., “Microstructure evolution of an EB-PVD NiAl coating and its underlying single crystal superalloy substrate”, Journal of Alloys and Compounds, Vol. 672, pp. 36-44, 2016, DOI: https://doi.org/10.1016/j.jallcom.2016.02.115.10.1016/j.jallcom.2016.02.115
    Search in Google ScholarBack to article
  34. [34] Kopec, M., et al., “Aluminide thermal barrier coating for high temperature performance of MAR 247 nickel based superalloy”, Coatings, Vol. 11, no. 1, pp. 48, 2021, DOI: https://doi.org/10.3390/coatings11010048.10.3390/coatings11010048
    Search in Google ScholarBack to article
  35. [35] An, T. F., et al., “Effect of the Al2O3 transformation in scales on the oxidation behavior of a nickel-base superalloy with an aluminide diffusion coating”, Oxid Met, Vol. 54, no. 3/4, pp. 301–316, 2000, DOI: https://doi.org/10.1023/A:1004654429687.10.1023/A:1004654429687
    Search in Google ScholarBack to article
  36. [36] Miracle, D., “Overview No. 104 The physical and mechanical properties of NiAl”, Acta metallurgica et materialia, Vol. 41, no. 3, pp. 649-684, 1993, DOI: https://doi.org/10.1016/0956-7151(93)90001-910.1016/0956-7151(93)90001-9
    Search in Google ScholarBack to article
  37. [37] Hesari, F., Moradi, M., and Torknik, F., “Transmission Electron Microscopy Sample Preparation of INCONEL 738 Nickel-Base Superalloy”, International Journal of Engineering, Vol. 32, no. 6, pp. 852–859, 2019, DOI: https://doi.org/10.5829/ije.2019.32.06c.08.10.5829/ije.2019.32.06c.08
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/auseme-2022-0003 | Journal eISSN: 2066-8910
Journal RSS Feed
Language: English
Page range: 28 - 39
Submitted on: Jul 22, 2022
|
Accepted on: Oct 15, 2022
|
Published on: Jan 5, 2023
Published by: Sapientia Hungarian University of Transylvania
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Nickel-based super alloy,
wire flame spraying,
XRD diffraction,
microhardness,
microstructure
Related subjects:
Engineering,
Electrical engineering,
Information technology,
Energy engineering,
Mechanical engineering,
Tools and methods,
Process engineering and industrial engineering

© 2023 Noureddine Menasri, Said Zergane, Noureddine Aimeur, Abdelhamid Saci, published by Sapientia Hungarian University of Transylvania
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 14 (2022): Issue 1 (December 2022)Next article