References
- [1] Sheikholeslami, M., Gorji-Bandpy, M., Ganji, D. D., “Review of Heat Transfer Enhancement Methods: Focus on Passive Methods using Swirl Flow Devices”, Renewable and Sustainable Energy Reviews, Vol. 49, pp. 444–469, 2015.10.1016/j.rser.2015.04.113
- [2] Kishan, R., Singh, D., Sharma, A. K., “CFD Analysis of Heat Exchanger Models Design Using ANSYS Fluent”, International Journal of Mechanical Engineering and Technology, Vol.11, no. 2, pp. 1–9, 202010.34218/IJMET.11.2.2020.001
- [3] Choi, S. U., Eastman, J. A., “Enhancing Thermal Conductivity of Fluids with Nanoparticles”, International Mechanical Engineering Congress and Exhibition, 1995.
- [4] Lee, S., Choi, S. S., Li, S. A., Eastman, J. A., “Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles”, Journal of Heat Transfer, Vol. 121, no. 2, pp. 280–289, 1999.10.1115/1.2825978
- [5] Sivakumar, A., Alagumurthi, N., Senthilvelan, T., “Experimental Investigation in Thermal Conductivity of CuO and Ethylene Glycol Nanofluid in a Serpentine-shaped Microchannel”, International Journal of Engineering Science and Technology, Vol. 6, no. 7, pp. 430, 2014.
- [6] Majeed, A. H., Abd, Y. H., “Performance of Heat Exchanger with Nanofluids”, Materials Science Forum, Vol. 1021, pp. 160–170, 2021.10.4028/www.scientific.net/MSF.1021.160
- [7] Karimzadehkhouei, M., Sadaghiani, A. K., Motezakker, A. R., Akgönül, S., Ozbey, A., Şendur, M., Koşar, A., “Experimental and Numerical Investigation of Inlet Temperature Effect on Convective Heat Transfer of γ-Al2O3/Water Nanofluid Flows in Microtubes”, Heat Transfer Engineering, Vol. 40, no. 9-10, pp. 738–752, 2019.10.1080/01457632.2018.1442305
- [8] Gheynani, A. R., Akbari, O. A., Zarringhalam, M., Shabani, G. A. S., Alnaqi, A. A., Goodarzi, M., Toghraie, D., “Investigating the Effect of Nanoparticles Diameter on Turbulent Flow and Heat Transfer Properties of Non-Newtonian Carboxymethyl Cellulose/CuO Fluid in a Microtube”, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29, no. 5, pp. 1699–1723,. 201910.1108/HFF-07-2018-0368
- [9] Rasheed, A. H., Alias, H., Salman, S. D., “Effects of Coil Pitch Spacing on Heat Transfer Performance of Nanofluid Turbulent Flow through Helical Microtube Heat Exchanger”, International Journal of Engineering & Technology, Vol. 7, pp. 356–360, 2018.10.14419/ijet.v7i4.14.27674
- [10] Wen, D., Ding, Y., “Formulation of Nanofluids for Natural Convective Heat Transfer Applications”, International Journal of Heat and Fluid Flow, Vol. 26, no. 6, pp. 855–864, 2005.10.1016/j.ijheatfluidflow.2005.10.005
- [11] Kumar, P., “A CFD Study of Heat Transfer Enhancement in Pipe Flow with Al2O3 Nanofluid”, International Journal of Mechanical and Mechatronics Engineering, Vol. 5, no. 9, pp. 1843–1847, 2011.
- [12] Danook, S. H., Jasim, Q. K., Hussein, A. M., “Nanofluid Convective Heat Transfer Enhancement Elliptical Tube inside the Circular Tube under Turbulent Flow”, Mathematical and Computational Applications, Vol. 23, no. 4, pp. 78, 2018.10.3390/mca23040078
- [13] Madhesh, D., Kalaiselvam, S., “Experimental Study on the Heat Transfer and Flow Properties of Ag–Ethylene Glycol Nanofluid as a Coolant”, Heat and Mass Transfer, Vol. 50, no. 11, pp. 1597–1607, 2014.10.1007/s00231-014-1370-9
- [14] Fule, P. J., Bhanvase, B. A., Sonawane, S. H., “Experimental Investigation of Heat Transfer Enhancement in Helical Coil Heat Exchangers using Water-based CuO Nanofluid”, Advanced Powder Technology, Vol. 28, no. 9, pp. 2288–2294, 2017.10.1016/j.apt.2017.06.010
- [15] Doshmanziari, F. I., Zohir, A., Kharvani, H. R., Jalali-Vahid, D., Kadivar, M., “Characteristics of Heat Transfer and Flow of Aluminum Oxide/Water Nanofluid in a Spiral-Coil Tube for Turbulent Pulsating Flow”, Heat and Mass Transfer, Vol. 52, no. 7, pp. 1305–1320, 2016.10.1007/s00231-015-1651-y
- [16] Qi, C., Yang, L., Chen, T., Rao, Z., “Experimental Study on Thermo-Hydraulic Performances of TiO2-H2O Nanofluids in a Horizontal Elliptical Tube”, Applied Thermal Engineering, Vol. 129, pp. 1315–1324, 2018.10.1016/j.applthermaleng.2017.10.137
- [17] Fabbri, G., “Optimum Profiles for Asymmetrical Longitudinal Fins in Cylindrical Ducts”, International Journal of Heat and Mass Transfer, Vol. 42, no. 3, pp. 511–523, 1999.10.1016/S0017-9310(98)00179-3
- [18] Ouzzane, M., Galanis, N., “Numerical Analysis of Mixed Convection in Inclined Tubes with External Longitudinal Fins”, Solar Energy, Vol. 71, no. 3, pp. 199-211, 2001.10.1016/S0038-092X(01)00030-5
- [19] Barba, A., Rainieri, S., Spiga, M., “Heat Transfer Enhancement in a Corrugated Tube”, International Communications in Heat and Mass Transfer, Vol. 29, no. 3, pp. 313–322, 2002.10.1016/S0735-1933(02)00321-4
- [20] Muzychka, Y. S., Yovanovich, M. M., “Laminar Forced Convection Heat Transfer in the Combined Entry Region of Non-Circular Ducts”, Journal of Heat Transfer, Vol. 126, no. 1, pp. 54–61, 2004.10.1115/1.1643752
- [21] Jarungthammachote, S., “Entropy Generation Analysis for Fully Developed Laminar Convection in Hexagonal Duct Subjected to Constant Heat Flux”, Energy, Vol. 35, no. 12, pp. 5374–5379, 2010.10.1016/j.energy.2010.07.020
- [22] Schenk, J., Han, B. S., “Heat Transfer from Laminar Flow in Ducts with Elliptic Cross-Section”, Applied Scientific Research, Vol. 17, no. 2, pp. 96–114, 1967.10.1007/BF00419779
- [23] Rao, S. S., Ramacharyulu, N. C. P., Krishnamurty, V. V. G., Laminar Forced Convection in Elliptic Ducts”, Applied Scientific Research, Vol. 21, no. 1, pp. 185–193, 1969.10.1007/BF00411606
- [24] Parlak, Z., “Optimal Design of Wavy Microchannel and Comparison of Heat Transfer Characteristics with Zigzag and Straight Geometries”, Heat and Mass Transfer, Vol. 54, no. 11, pp. 3317–3328, 2018.10.1007/s00231-018-2375-6
- [25] Rao, G. S., Sharma, K. V., Chary, S. P., Bakar, R. A., Rahman, M. M., Kadirgama, K., Noor, M. M., “Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column”, Journal of Mechanical Engineering and Sciences, Vol. 1, no. 1, pp. 1–15, 2011.10.15282/jmes.1.2011.1.0001
- [26] Maiga, S. E. B., Palm, S. J., Nguyen, C. T., Roy, G., Galanis, N., “Heat Transfer Enhancement by using Nanofluids in Forced Convection Flows”, International Journal of Heat and Fluid Flow, Vol. 26, no. 4, pp. 530–546, 2005.10.1016/j.ijheatfluidflow.2005.02.004
- [27] You, S. M., Kim, J. H., Kim, K. H., “Effect of Nanoparticles on Critical Heat Flux of Water in Pool Boiling Heat Transfer”, Applied Physics Letters, Vol. 83, no. 16, pp. 3374–3376, 2003.10.1063/1.1619206
- [28] Sardarabadi, M., Passandideh-Fard, M., “Experimental and Numerical Study of Metal-Oxides/Water Nanofluids as a Coolant in Photovoltaic Thermal Systems (PVT)”, Solar Energy Materials and Solar Cells, Vol. 157, pp. 533–542, 2016.10.1016/j.solmat.2016.07.008
- [29] Chamsa-Ard, W., Brundavanam, S., Fung, C. C., Fawcett, D., Poinern, G., “Nanofluid Types, Their Synthesis, Properties, and Incorporation Indirect Solar Thermal Collectors: A Review”, Nanomaterials, Vol. 7, no. 6, pp. 131, 2017.10.3390/nano7060131548577828561802
- [30] Ali, H. M., Ali, H., Liaquat, H., Maqsood, H. T. B., Nadir, M. A., “Experimental Investigation of Convective Heat Transfer Augmentation for Car Radiator using ZnO–Water Nanofluids”, Energy, Vol. 84, pp. 317–324, 2015.10.1016/j.energy.2015.02.103
- [31] Hussein, A. M., Bakar, R. A., Kadirgama, K., “Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System”, Case Studies in Thermal Engineering, Vol. 2, pp. 50–61, 2014.10.1016/j.csite.2013.12.001
- [32] Rasheed, A. H., Alias, H. B., Salman, S. D., “Experimental and Numerical Investigations of Heat Transfer Enhancement in Shell and Helically Microtube Heat Exchanger using Nanofluids”, International Journal of Thermal Sciences, Vol. 159, pp. 106547, 2021.10.1016/j.ijthermalsci.2020.106547
- [33] Ahmed, W., Chowdhury, Z. Z., Kazi, S. N., Johan, M. R., Akram, N., Oon, C. S., “Effect of ZnO-Water-Based Nanofluids from Sonochemical Synthesis Method on Heat Transfer in a Circular Flow Passage”, International Communications in Heat and Mass Transfer, Vol. 114, pp. 104591, 2020.10.1016/j.icheatmasstransfer.2020.104591
- [34] Safir, N. H, Bin-Abdun, N. A., Razlin, Z. M., Amin, N. A. M., Voon, C. H., “Enhancement of Heat Transfer Properties for ZnO/Water Nanofluid in Heat Exchange Applications”, AIP Conference Proceedings, Vol. 2030, pp. 020010, 2018.10.1063/1.5066651
- [35] Lahari, M. L. R. C., Sai, P. H. V. S. T., Swamy, K. S. N., Murthy, N. K., Sharma, K. V., “Investigation on Heat Transfer Properties of Water Based TiO2-ZnO Nanofluids”, Materials Science and Engineering, Vol. 455, pp. 012092, 2018.10.1088/1757-899X/455/1/012092
- [36] Shahrul, I. M., Mahbubul, I. M., Saidur, R., Sabri, M. F. M., “Experimental Investigation on Al2O3–W, SiO2–W and ZnO–W Nanofluids and Their Application in a Shell and Tube Heat Exchanger”, International Journal of Heat and Mass Transfer, Vol. 97, pp. 547–558, 2016.10.1016/j.ijheatmasstransfer.2016.02.016
- [37] Ali, H. M., Ali, H., Liaquat, H., Maqsood, H. T. B., Nadir, M. N., “Experimental Investigation of Convective Heat Transfer Augmentation for Car Radiator using ZnO–Water Nanofluids”, Energy, Vol. 84, pp. 317–324, 2015.10.1016/j.energy.2015.02.103
- [38] Noorbakhsh, M., Ajarostaghi, S. S. M., Zaboli, M., Kiani, B., “Thermal Analysis of Nanofluids Flows in a Double Pipe Heat Exchanger with Twisted Tapes Insert on Both Sides”, Journal of Thermal Analysis and Calorimetry, pp. 1–12, 2021.10.1007/s10973-021-10738-x
- [39] Namburu, P. K., Das, D. K., Tanguturi, K. M., Vajjha, R. S., “Numerical Study of Turbulent Flow and Heat Transfer Characteristics of Nanofluids Considering Variable Properties”, International Journal of Thermal Sciences, Vol. 48, no. 2, pp. 290–302, 2009.10.1016/j.ijthermalsci.2008.01.001
- [40] Rudyak, V. Y., Minakov, A. V., “Thermophysical Properties of Nanofluids”, Eur. Phys. J., Vol. 41, pp. 15, 2018.10.1140/epje/i2018-11616-929380078
- [41] Nguyen, C. T., Desgranges, F., Roy, G., Galanis, N., Maré, T., Boucher, S., Mintsa, H. A., “Temperature and Particle-size Dependent Viscosity Data for Water-Based Nanofluids–Hysteresis Phenomenon”, International Journal of Heat and Fluid Flow, Vol. 28, no. 6, pp. 1492–1506, 2007.10.1016/j.ijheatfluidflow.2007.02.004
- [42] Lu, W. Q., Fan, Q. M., “Study for the Particle’s Scale Effect on Some Thermophysical Properties of Nanofluids by a Simplified Molecular Dynamics Method”, Engineering Analysis with Boundary Elements, Vol. 32, no. 4, pp. 282–289, 2008.10.1016/j.enganabound.2007.10.006
- [43] Pastoriza-Gallego, M. J., Casanova, C., Legido, J. A., Piñeiro, M. M., “CuO in Water Nanofluid: Influence of Particle Size and Polydispersity on Volumetric Behavior and Viscosity”, Fluid Phase Equilibria, Vol. 300, no. 1-2, pp. 188–196, 2011.10.1016/j.fluid.2010.10.015
- [44] Eastman, J. A., Choi, S. U. S., Li, S., Yu, W., Thompson, L. J., “Anomalously Increased Effective Thermal Conductivities of Ethylene Glycol-Based Nanofluids Containing Copper Nanoparticles”, Applied Physics Letters, Vol. 78, no. 6, pp. 718–720., 200110.1063/1.1341218
- [45] Chon, C. H., Kihm, K. D., Lee, S. P., Choi, S. U., “Empirical Correlation Finding the Role of Temperature and Particle Size for Nanofluid (Al2O3) Thermal Conductivity Enhancement”, Applied Physics Letters, Vol. 87, no. 15, pp. 153107, 2005.10.1063/1.2093936
- [46] Karthikeyan, N., Philip, J., Raj, B., “Effect of Clustering on the Thermal Conductivity of Nanofluids”, Materials Chemistry and Physics, Vol. 109, no. 1, pp. 50–55, 2008.10.1016/j.matchemphys.2007.10.029
- [47] Beck, M. P., Yuan, Y., Warrier, P., Teja, A. S., “The Effect of Particle Size on the Thermal Conductivity of Alumina Nanofluids”, Journal of Nanoparticle Research, Vol. 11, no. 5, pp. 1129–1136, 2009.10.1007/s11051-008-9500-2
- [48] Yeganeh, M., Shahtahmasebi, N., Kompany, A., Goharshadi, E., Youssefi, A., Šiller, L., “Volume Fraction and Temperature Variations of the Effective Thermal Conductivity of Nanodiamond Fluids in Deionized Water”, International Journal of Heat and Mass Transfer, Vol. 53, pp. 3186–3192, 2010.10.1016/j.ijheatmasstransfer.2010.03.008
- [49] Sundar, L. S., Singh, M. K., Sousa, A. C., “Investigation of Thermal Conductivity and Viscosity of Fe3O4 Nanofluid for Heat Transfer Applications”, International Communications in Heat and Mass Transfer, Vol. 44, pp. 7–14, 2013.10.1016/j.icheatmasstransfer.2013.02.014
- [50] Li, C. H., Peterson, G. P., “Experimental Investigation of Temperature and Volume Fraction Variations on the Effective Thermal Conductivity of Nanoparticle Suspensions (Nanofluids)”, Journal of Applied Physics, Vol. 99, pp. 084314, 2006.10.1063/1.2191571
- [51] Pryazhnikov, M., Minakov, A., Rudyak, V., Guzei, D., “Thermal Conductivity Measurements of Nanofluids”, International Journal of Heat and Mass Transfer, Vol. 104, pp. 1275–1282, 2017.10.1016/j.ijheatmasstransfer.2016.09.080
- [52] Alias, H., Rasheed, A. H., Salman, S. D., “Enhancement of Nanofluid Heat Transfer in Elliptical Pipe and Helical Micro Tube Heat Exchanger”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 66, no. 1, pp. 53–63, 2020.
- [53] Ahmadi, K., Khanmohammadi, S., Khanmohammadi, S., Bahiraei, M., Bach, Q. V., “Heat Transfer Assessment of Turbulent Nanofluid Flow in a Circular Pipe Fitted with Elliptical-cut Twisted Tape Inserts”, Journal of Thermal Analysis and Calorimetry, pp. 1–14, 2020.10.1007/s10973-020-10338-1
- [54] Qi, C., Chen, T., Wang, Y., Yang, L., “Experimental Study on the Thermo-Hydraulic Performance of Nanofluids in Diverse Axial Ratio Elliptical Tubes with a Built-in Turbulator”, Korean Journal of Chemical Engineering, Vol. 37, no. 9, pp. 1466-1481, 2020.10.1007/s11814-020-0566-6
- [55] Chaurasia, P., Kumar, A., Yadav, A., Rai, P. K., Kumar, V., Prasad, L., “Heat Transfer Augmentation in Automobile Radiator using Al2O3–Water-Based Nanofluid”, SN Applied Sciences, Vol. 1, no. 3, pp. 1–7, 2019.10.1007/s42452-019-0260-7
- [56] Ragueb, H., Mansouri, K., “Numerical Investigation of Laminar Forced Convection for Non-Newtonian Nanofluids Flowing Inside an Elliptical Duct under Convective Boundary Condition”, International Journal of Numerical Methods for Heat & Fluid Flow., Vol. 29, no. 1, pp. 334–364, 2019.10.1108/HFF-02-2018-0055
- [57] Hussein, A. M., Bakar, R. A., Kadirgama, K., Sharma, K. V., “Heat Transfer Enhancement with the Elliptical Tube under Turbulent Flow TiO2-Water Nanofluid”, Thermal Science, Vol. 20, no. 1, pp. 89–97, 2016.10.2298/TSCI130204003H
- [58] Zheng, Z., Fletcher, D. F., Haynes, B. S., “Chaotic Advection in Steady Laminar Heat Transfer Simulations: Periodic Zigzag Channels with Square Cross-Sections”, International Journal of Heat and Mass Transfer, Vol. 57, no. 1, pp. 274–284, 2013.10.1016/j.ijheatmasstransfer.2012.10.029
- [59] Zheng, Z., Fletcher, D. F., Haynes, B. S., “Laminar Heat Transfer Simulations for Periodic Zigzag Semicircular Channels: Chaotic Advection and Geometric Effects”, International Journal of Heat and Mass Transfer, Vol. 62, pp. 391–401, 2013.10.1016/j.ijheatmasstransfer.2013.02.073
- [60] Ma, D. D., Xia, G. D., Li, Y. F., Jia, Y. T., Wang, J., “Effects of Structural Parameters on Fluid Flow and Heat Transfer Characteristics in a Microchannel with Offset Zigzag Grooves in the Sidewall”, International Journal of Heat and Mass Transfer, Vol. 101, pp. 427–435, 2016.10.1016/j.ijheatmasstransfer.2016.04.091
- [61] Shi, H., Raimondi, N. D. M., Fletcher, D. F., Cabassud, M., Gourdon, C., “Numerical Study of Heat Transfer in Square Millimetric Zigzag Channels in the Laminar Flow Regime”, Chemical Engineering and Processing-Process Intensification, Vol. 144, pp. 107624, 2019.10.1016/j.cep.2019.107624
- [62] Afshari, E., Ziaei-Rad, M., Dehkordi, M. M., “Numerical Investigation on a Novel Zigzag-Shaped Flow Channel Design for Cooling Plates of PEM Fuel Cells”, Journal of the Energy Institute, Vol. 90, no. 5, pp. 752–763, 2017.10.1016/j.joei.2016.07.002
- [63] Karmo, D., Ajib, S., Al Khateeb, A., “A New Method for Designing an Effective Finned Heat Exchanger”, Applied Thermal Engineering, Vol. 51, no. 1–2, pp. 539–550, 2013.10.1016/j.applthermaleng.2012.09.042
- [64] Nuntadusit, C., Piya, I., Wae-hayee, M., Eiamsa-ard, S., “Heat Transfer Characteristics in a Channel Fitted with Zigzag-Cut Baffles”, Journal of Mechanical Science and Technology, Vol. 29, no. 6, pp. 2547–2554, 2015.10.1007/s12206-015-0552-9
- [65] Toghraie, D., Abdollah, M. M. D., Pourfattah, F., Akbari, O. A., Ruhani, B., “Numerical Investigation of Flow and Heat Transfer Characteristics in Smooth, Sinusoidal, and Zigzag-Shaped Microchannel with and without Nanofluid”, Journal of Thermal Analysis and Calorimetry, Vol. 131, no. 2, pp. 1757–1766, 2018.10.1007/s10973-017-6624-6
- [66] Ajeel, R. K., Salim, W. I., Hasnan, K., “Thermal and Hydraulic Characteristics of Turbulent Nanofluids Flow in Trapezoidal-Corrugated Channel: Symmetry and Zigzag-Shaped”, Case Studies in Thermal Engineering, Vol. 12, pp. 620–635, 2018.10.1016/j.csite.2018.08.002
- [67] Zheng, Z., Fletcher, D. F., Haynes, B. S., “Transient Laminar Heat Transfer Simulations in Periodic Zigzag Channels”, International Journal of Heat and Mass Transfer, Vol. 71, pp. 758–768, 2014.10.1016/j.ijheatmasstransfer.2013.12.056
