Corrosion Resistance of Coatings Produced by Spraying Powders Under a Laser Beam in a Saline Environment NaCl 3% by the Electrochemical Method

Samia Aouici; El Hadi Boussaha; Ferial Krid; Fadia Mechati

doi:10.2478/auseme-2020-0008

Abstract

The manuscript focuses on the study of corrosion resistance in NaCl medium of a 304L type stainless steel after application of protective nickel-based and cobalt-based coatings produced by powder spraying under a continuous CO₂ laser (10.6 µm wavelength) beam. Using polarization and electrochemical impedance spectroscopy methods, the results found confirm that metallic coatings produced under high energy beams offer excellent protection up to an efficiency of E = 98.12% in aggressive environments with salinity to 3%.

References

[1] Pelletier, J. M., Sahour, M. C., Pilloz, M., and Vannes, A. B., “Influence of processing conditions on geometrical features of laser claddings obtained by powder injection”, Journal of Materials Science, vol. 28, pp. 5184-5188, 1993.
Search in Google Scholar Back to article
[2] Sallamand, P., “Surface alloy and coatings produced under a laser beam by spraying powder on an aluminum-based substrate: microstructural, mechanical and tribological characterization”, Thesis, INSA Lyon, 1994.
Search in Google Scholar Back to article
[3] Sexton, C. L., Byrne, G., and Walkins, K.G., “Alloy development by laser cladding: an overview”, Journal of Laser Applications, vol. 13, 2-11, 2001.10.2351/1.1340337
Search in Google Scholar Back to article
[4] Hidouci, A., Pelletier, J. M., Ducoin, F., Dezert, D., El Guerjouma, R., “Microstructural and mechanical characteristics of laser coatings”, Surface and Coatings Technology, vol. 123, pp. 17-23, 2000.10.1016/S0257-8972(99)00394-1
Search in Google Scholar Back to article
[5] Pei, Y. T., Ouyang, J. H., and Lei, T.C., “Microstructure of bonding zones in laser-clad Ni-alloy-based composite coatings reinforced with various ceramic powders”, Surf. Metall. Mater. Trans, vol. 27A2, pp. 391-400, 1996.10.1007/BF02648416
Search in Google Scholar Back to article
[6] Sexton, C. L., Byrne, G., and Walkins, K. G., “Alloy development by laser cladding: An overview”, Journal of Laser Applications, vol. 13, pp. 2-11, 2001.10.2351/1.1340337
Search in Google Scholar Back to article
[7] Safonov, A. N., and Aleksenko, S., “Effect of laser treatment on the wear resistance of steels”, Metal Science and Heat treatment, vol. 40, pp. 399-401, 1998.10.1007/BF02468246
Search in Google Scholar Back to article
[8] Ajao, J., and Hamar-Thibault, S., “Influence of additions on the solidification behaviour of Ni-B alloys- crystallography of Ni-Ni3B eutectic”, Journal of Materials Science, 1988.10.1007/BF01154022
Search in Google Scholar Back to article
[9] De Oliveira, U., Ocelik, V., and De Hosson, J. T. M., “Analysis of coaxial laser cladding processing conditions JTM”, Surface & Coatings Technology: 197.2-3, 127-136 10. vol. 23, pp. 1112–1125, 2005.
Search in Google Scholar Back to article
[10] Boussaha, E. H., and Al., “Study of powder particle size effect on microstructural and geometrical features of laser claddings using response surface methodology RSM”, Electrical and Mechanical Engineering, Acta Universitatis Sapientiae, vol. 11, pp. 99-116, 2019.10.2478/auseme-2019-0009
Search in Google Scholar Back to article
[11] Da Rocha, J., Gomes, J., D’Elia, E., “Aqueous Extracts of Mango and Orange Peel as Green Inhibitors for Carbon Steel in Hydrochloric Acid Solution”, Mater Research, 17:1581-1587. https://doi.org/10.1590/1516-1439.285014, 2014.10.1590/1516-1439.285014
Search in Google Scholar Back to article
[12] Aounitia, A., Elmsellema, H., Tighadouinia, S., and Al. “Schiff’s base derived from 2-acetyl thiophene as corrosion inhibitor of steel in acidic medium”, https://doi.org/10.1016/j.jtusci.11.008, 2015.
Search in Google Scholar Back to article
[13] Scully, J. C., “Corrosion Protection, Fundamental principles”, Editor: Masson, Materials Science Collection, 208p., Released July 1995.
Search in Google Scholar Back to article
[14] Monsempès. T., “Corrosion of steel by oils containing naphthenic acids: search for a method to measure the instantaneous rate of corrosion”, Materials Doctoral School of Lyon, Doctoral thesis, France, 2000.
Search in Google Scholar Back to article
[15] Ntienoue, J., “Study, characterization and electrochemical monitoring of the surface of 254 SMO stainless steel in natural Amazonian aqueous media”, Doctoral thesis, University of the Antilles and Guyana, 2013.
Search in Google Scholar Back to article
[16] Gabrielli, C., “Electrochemical methods Impedance measurements”, Edition, Techniques of Engineering, Paris, France, 1994.
Search in Google Scholar Back to article
[17] Pergue, D., “Application of power lasers. Obtaining out of equilibrium states by surface reflections of metal surfaces”, Thesis, INPG, Grenoble, 1987.
Search in Google Scholar Back to article
[18] Laribi, M., Mesrati, N., Laracine, M., Vannes, A. B., Thereux, D., “Experimental determination of residual stresses within structures developed by thermal spraying”, Materials & Techniques, N°9-10, pp. 15-21, 2001.10.1051/mattech/200189090015
Search in Google Scholar Back to article
[19] De Mello, J. D. B., et al., “Abrasion mechanisms of white cast iron I : Influence of the metallurgical structure of molybdenum white cast irons”, Materials Sciences and Engineering, Vol. 73, pp. 203-213, 1985.10.1016/0025-5416(85)90309-X
Search in Google Scholar Back to article
[20] Olson, D., “Prediction of austenitic weld metal microstructure and properties”, Materials Science, pp. 281-295, 1985.
Search in Google Scholar Back to article
[21] Pacquentin, W., “Contribution to the study of the physico-chemical properties of surfaces modified by laser treatment. Application to improving the resistance to localized corrosion of stainless steels”, Materials, University of Bourgogne, pp. 64-84, 2011.
Search in Google Scholar Back to article
[22] Anoune, I., “Corrosion resistance of nickel-alumina composite coatings on different substrates”, Thesis, University of Batna, pp. 55-64, 2014.
Search in Google Scholar Back to article

Corrosion Resistance of Coatings Produced by Spraying Powders Under a Laser Beam in a Saline Environment NaCl 3% by the Electrochemical Method

Abstract

Paradigm

My account