References
- [1] Gravdahl, J. T., and Egeland, O., “Moore-Greitzer Axial Compressor Model with Spool Dynamics”, in Proc. of 36th IEEE Conference on Decision and Control, 1997, pp. 4714–4719.
- [2] Gravdahl, J. T., and Egeland,O., “Compressor surge and rotating stall Modelling and control”, Advances in Industrial Control. Springer Verlag. London Limited, 1999.
- [3] Sari, G., Akhrif, O., and Saydy, L., “Qualitative Analysis of an Axial Compressor Model with Non-constant Speed”, in Proc. of ASME 2011 Power Conference, Vol. 1, 2011, pp. 515–524.
- [4] Sari, G., Akhrif, O., and Saydy, L., “The impact of speed variation on the stability of variable speed axial compressors at efficient operating points”, in Proc. of American Control Conference, 2012, pp. 404–410.
- [5] Sari.O., “Model analysis and nonlinear control of air compressors”, PhD thesis. Montreal University, 2014.
- [6] Sheng, H., Huang, W., Zhang, T., and Huang, X., “Robust Adaptive Fuzzy Control of Compressor Surge Using Back-stepping”, Arabian Journal for science and engineering, Vol. 39, Issue.2, pp. 9301–9308, December 2014.
- [7] Moghaddam, J. J., and Madani, M., “A decoupled adaptive neuro-fuzzy sliding mode control system to control rotating stall and surge in axial compressors”, Journal of Expert Systems with Applications, Vol. 38, Issue. 4, pp. 4490–4496, April 2011.
- [8] Zaiet, C., Akhrif, O., and Saydy, L., “Modeling and Non Linear Control of a Gas Turbine”, International Symposium on Industrial Electronics ISIE 2006, 2006, pp. 2688–2694.
- [9] Fontaine, D., Liao, S., Paduano, J., and Kokotovic, P., “Nonlinear control experiments for rotating on an axial flow compressor”, in Proc. of 39th IEEE conference on decision and control, 2000, pp. 1329–1334.
- [10] Lin, S., Yang, C., Wu, P., and Song, Z., “Fuzzy logic surge control in variable speed axial compressors”, in Proc. of 10th IEEE International Conference on Control and Automation (ICCA), 2013, pp. 1178–1183.
- [11] Uddin, N., and Gravdahl, J.T., “Active compressor surge control using piston actuation”, in Proc. ASME 2011 Dynamic Systems and Control Conference DSCC2011, 2011, pp. 69–76.
- [12] Moghaddam, J. J., Farahani, M. H., and Amanifard, N., “A neural network-based slidingmode control for rotating stall and surge in axial compressors”, Journal of Applied Soft Computing, Vol.11, Issue. 1, pp. 1036–1043, January 2011.
- [13] Sheng, H., Huang, W., and Zhang, T., “Output feedback control of surge and rotating stall in axial compressors”, Asian Journal of Control, Vol. 19, Issue 1, pp.1–7, September 2016.
- [14] Debbah, A., Kharfene, H., Karboua, A., “Using Robust sliding mode controller to improving the aerodynamic performance of a gas turbine”, in Proc. of the 4th International Seminar on New and Renewable Energies, 2016, pp. 1–6.
- [15] Lui, J., “Advanced sliding mode control for mechanical systems”. Springer. Tsinghua University Press. Beijing, 2012.
- [16] Defoort, M., Floquet, T., Kokosy, A., and Perruquetti, W., “A novel higher order sliding mode control scheme”, Journal of Systems and Control Letters Elsevier, Vol. 58, Issue. 2, pp. 102–108, 2009.
- [17] Tsai, C., and Wu, H., “Robust passivity-based control of weakly minimum phase nonlinear uncertain systems: An application to manipulator”, in Proc. of 7th Asian Control Conference, ASCC, 2009, pp. 919–924.
- [18] Feher, A., Kutasi, D. N., “Modelling and control of bounded hybrid systems in power electronics”, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, Vol. 9, Issue 1, pp. 33–42, December 2017.
- [19] Horvath,Z., Edelmayer, A., “Robust model-based detection of faults in the air path diesel engines “, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, Vol. 7, Issue 1, pp. 5–22, December 2015.
- [20] Fodor, D., “Experimental investigation on robust control of induction motor using H∞ output feedback”, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, Vol. 1, Issue 1, pp. 29–40, December 2009.
- [21] Chen, P.V., Chiang, C. H., and Liu, J. C., “The input/output constrained control for V/STOL aircraft dynamics under a descriptor system formulation”, Journal of Aeronautic and aviation, Vol. 41, Issue 1, pp. 43–52, January 2009.
- [22] Kelemen, A., Kutasi, N., “Lyapunov-based frequency-shift power control of inductionheating converters with hybrid resonant load”, Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, Vol. 1, Issue 1, pp. 41–52, December 2009.
- [23] Leu,V. Q., Choi, H. H., and Jung, J. H., “LMI based sliding mode speed tracking control design for surface-mounted permanent magnet synchronous Motors”, Journal of Electrical Engineering and Technology, Vol. 7, Issue 4, pp. 513–523, July 2012.
- [24] Der-Cherng, L., Ren, S. M., and Shih-Tse, S., “A Feedback Linearization Design for Compressor’s Surge Control”, in Proc. of Industrial Technology ICIT, 2008, pp. 1–6.
- [25] Boyd, S., El Ghaoui, L., Feron, E., and Balakrishnan, V., “Linear Matrix Inequalities in System and Control Theory”, SIAM. Philadelphia, 1994.
- [26] Argha, A., Li, L., SU, S. H., and Nguyen, H., “A new LMI-Based Robust Sliding Mode control for the uncertain Discrete-Time system”, in Proc. of 53th IEEE Conference on Decision and Control, 2014, pp. 4747–4752.
- [27] Mahmoud, M. S., and Soliman, H. M., “Design of Robust Power System Stabilizer Based on Particle Swarm Optimization”, Journal of Circuits and Systems, Vol. 3, pp. 82–89, 2012.
- [28] Chen, D.Y., Liu, Y. X., Ma, X. Y., and Zhang, R. F., “No-chattering sliding mode control in a class of fractional-order chaotic systems”, Chinese Physics B, Vol. 2, No. 20, pp. 120506-1–120506-9, December 2011.
- [29] Hu, X., Wu, L., Hu, C., and Gao, H., “Adaptive sliding mode tracking control for a flexible air-breathing hypersonic vehicle”, Journal of the Franklin Institute, Vol. 349, Issue. 2, pp. 559–577, Marsh 2012.
- [30] Kumar, J., Azar, A. T., Kumar. V., and Rana K. P. S., “Design of Fractional Order Fuzzy Sliding Mode Controller for Nonlinear Complex Systems”, Chapter 9, Advances in Nonlinear Dynamics and Chaos (ANDC) Elsevier, pp. 249–282, 2018.
- [31] Panda, S., and Padhy, N, P., “Comparison of particle swarm optimization and genetic algorithm for FACTS-based controller design”, Elsevier Applied Soft Computing, Vol. 8, Issue. 4, pp. 1418–1427, September 2008.
- [32] Laminia, C., Benhlimab, S., and Elbekria, A., “Genetic Algorithm Based Approach for Autonomous Mobile Robot Path Planning”, Journal of Procedia Computer Science Elsevier, Vol. 127, pp. 180–189, 2018.
- [33] Khan, A. A., and Mir, R. N., “Optimization of Constrained Function Using Genetic Algorithm”, Journal of Computer Engineering and Intelligent System, Vol. 8, No. 2, pp. 11–15, 2017.
- [34] Deb, K., “An Efficient Constraint Handling Method for Genetic Algorithm. Computer Methods in Applied Mechanics and Engineering”, Journal of Computer Methods in Applied Mechanics and Engineering Elsevier, Vol. 186, Issue 2–4, pp. 311–338, June 2000.
- [35] Kramer, O., “A Review of Constraint-Handling Techniques for Evolution Strategies”, Journal of Applied Computational Intelligence and Soft Computing, Vol. 2010, pp. 1–11, January 2010.
- [36] Yanzhi, R., and Sanyang, L., “Modified particle swarm optimization algorithm for engineering structural optimization problem”, in Proc. of 13th International Conference on Computational Intelligence and Security, 2017, pp. 504–507.
- [37] Satpati, B., Koley,C., and Datta, S., “Robust PID controller design using particle swarm optimization-enabled automated quantitative feedback theory approach for a first-order lag system with minimal dead time”, Journal of Systems Science & Control Engineering, Vol. 2, Issue 1, pp. 502–511, April 2014.
- [38] Juneja, M., and Nagar, S.K., “Particle swarm optimization algorithm and its parameters: A review”, in Proc. of International Conference on Control. Computing Communication and Materials (ICCCCM), 2016, pp. 1–5.