References
- 1. Chattopadhyay, A. B., Machining and Machine Tools, 2nd edition, Wiley, India (2017).
- 2. Bhattacharya, A., Metal Cutting: Theory and Practice, 2nd edition, New Central Book Agency, India, 2012.
- 3. Enache, S., Belous, V., Proiectarea sculelor aşchietoare, E.D.P., Bucureşti, (1983).
- 4. Enache, S., Minciu, C., Proiectarea asistată a sculelor aşchietoare, Editura Tehnică, Bucureşti, (1986).
- 5. Lăzărescu, I., Calculul şi construcţia sculelor aşchietoare, Editura Tehnică, Bucureşti, (1962).
- 6. Lăzărescu, I., et al., Teoria şi practica sculelor aşchietoare, Editura Universităţii din Sibiu, (1994).
- 7. Secară, Ghe., Proiectarea sculelor aşchietoare, E.D.P., Bucureşti, (1979).
- 8. Chase, K. W., Gao, J., and Magleby, S. P., General 2-D Tolerance Analysis of Mechanical Assemblies with Small Kinematic Adjustments. J Des Manuf, 5:263–274. (1995).
- 9. Dantan, J.-Y., Ballu, A., and Mathieu, L., Geometrical product specifications model for product life cycle, Computer-Aided Design, 40(4):493–501. (2008).
- 10. Denkena, B. and Biermann, D., Cutting edge geometries, CIRP Annals, 63(2):631–653, (2014).
- 11. GAO, J., CHASE, K. W., and MAGLEBY, S. P., Generalized 3-D tolerance analysis of mechanical assemblies with small kinematic adjustments, IIE Transactions, 30(4):367–377. (1998).
- 12. Schleich, B. and Wartzack, S. A Quantitative Comparison of Tolerance Analysis Approaches for Rigid Mechanical Assemblies, Procedia CIRP, 43:172–177. (2016).
- 13. Shen, Z., Ameta, G., Shah, J. J., and Davidson, J. K., A Comparative Study Of Tolerance Analysis Methods, Journal of Computing and Information Science in Engineering, 5(3):247. (2005).
- 14. Soner Camuz, Tolerance Analysis Framework for Cutting Tool Interface Design, PhD Thesis, Department of Industrial and Materials Science CHALMERS UNIVERSITY OF TECHNOLOGY Goteborg, Sweden (2019)
- 15. ISO - 25.100.01 - Cutting tools in general
- 16. ISO 841:2001(E), Industrial automation systems and integration — Numerical control of machines— Coordinate system and motion nomenclature
- 17. ISO 2806:1994, Industrial automation systems — Numerical control of machines — Vocabulary
- 18. ISO 6983-1:1982, Numerical control of machines — Program format and definition of address words — Part 1: Data format for positioning, line motion and contouring control system
- 19. ISO 3002-1:1982 Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers.
- 20. ISO 3002-1:1982/Amd 1:1992 Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers —Amendment 1 Abstract Preview Adds new clause 8 (Direction of the helix and cutting direction)
- 21. ISO 3002-2:1982 Basic quantities in cutting and grinding - Part 2: Geometry of the active part of cutting tools - General conversion formulae to relate tool and working angles
- 22. ISO 14405-1:2010 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
- 23. ISO 14405_2_2011, Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2 Dimensions other than linear sizes
- 24. External turning (coromant.com)