Particularities of Wire Electrode Vibrations on WEDM

Călin, Deneș; Valentin, Grecu

doi:10.2478/aucts-2021-0002

.blurhash-client-img { display: none !important; }

Particularities of Wire Electrode Vibrations on WEDM

Acta Universitatis Cibiniensis. Technical Series

Volume 73 (2021): Issue 1 (December 2021)

By: Deneș Călin and Grecu Valentin

Open Access

|Dec 2021

Abstract

The paper presents the particularities of wire electric discharge machining (WEDM) regarding electrode tool vibration (wire tool vibration). It shows how the electrode tool vibrates and the vibration shape. The presented mathematical model can be successfully used in practice to improve the accuracy of processing through the wire electric discharge machining.

References

1. I. Beltrami, A. Bertholds, D. Dauw (1996) A simplified post process for wire cut EDM, J. Mater. Process. Technol. 58 385–389.
Search in Google Scholar Back to article
2. D.F. Dauw, I. Beltrami (1994) High-precision wire-EDM by online wire positioning control, Ann. CIRP 43 (1) 193–197.
Search in Google Scholar Back to article
3. D.F. Dauw, H. Sthioul, R. Delpretti, C. Tricarico (1989) Wire analysis and control for precision EDM cutting, Ann. CIRP 38 (1) 191–194.
Search in Google Scholar Back to article
4. C. Deneş (2005) Consideration Regarding the Influence of the Wire Electrode’s Vibration upon the Parts Precision, Processed using Wire Electrical Discharge Machining. Proceedings of the VIII-th Symposium, Editura Politehnica Timişoara, ISBN 973-625-238-8, pp.137-144.
Search in Google Scholar Back to article
5. N. Kinoshita, M. Fukui, Y. Kimura (1984) Study on wire-EDM: inprocess measurement of mechanical behaviour of electrode-wire, Ann. CIRP 33 (1) 89–92.10.1016/S0007-8506(07)61386-9
Search in Google Scholar Back to article
6. T.C. Lee, T.M. Yue, Y.S. Lau (1997) The measurement and analysis of the wire vibration in ultrasonic aided wire-cut machining, in: Proceedings of the International Conference on Precision Engineering (ICPE’97), Taipei, Taiwan, pp. 677–683.
Search in Google Scholar Back to article
7. N. Mohri, H. Yamada, K. Furutani, T. Narikiyo, T. Magara (1998) System identification of wire electrical discharge machining, Ann. CIRP 47 (1) 173–176.
Search in Google Scholar Back to article
8. S.M. Pandit, K.P. Rajurkar (1980) Data dependent systems approach to EDM process modeling from surface roughness profiles, Ann. CIRP 29 (1) 107–112.
Search in Google Scholar Back to article

DOI: https://doi.org/10.2478/aucts-2021-0002 | Journal eISSN: 2668-6449 | Journal ISSN: 1583-7149

Journal RSS Feed

Language: English

Page range: 1 - 5

Published on: Dec 30, 2021

Published by: Lucian Blaga University of Sibiu

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

WEDM,

machining precision,

wire electrode vibrations

Related subjects:

Engineering,

Electrical engineering,

Automation,

Mechanical engineering,

Production technology,

Process engineering and industrial engineering

© 2021 Deneș Călin, Grecu Valentin, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous article Volume 73 (2021): Issue 1 (December 2021)Next article