References
- 1. Ambrogio, G., De Napoli, L., Filice, L., et. al., Application of incremental forming process for high customised medical product manufacturing, Journal of Materials Processing Technology, Vol. 162, pp. 156–162, (2005).10.1016/j.jmatprotec.2005.02.148
- 2. Oleksik, V., Pascu, A., Deac, C., Fleaca, R., et al., The influence of geometrical parameters on the incremental forming process for knee implants analyzed by numerical simulation, AIP Conference Proceedings, Vol. 1252, No. 1, pp. 1208-1215, (2010).10.1063/1.3457520
- 3. Racz, G. S., Oleksik, V. S., Breaz, R. E., Incremental forming–CAE/CAM approaches and results, IOP Conference Series: Materials Science and Engineering, Vol. 591, No. 1, pp. 012065, (2019).
- 4. Marosan, A., Constantin, G., Pid controller based on a gyroscope sensor for an omnidirectional mobile platform, Proceedings in Manufacturing Systems, Vol. 15, No. 1, pp. 27-34, (2020).
- 5. Allwood, J. M., Houghton, N. E., Jackson, K. P., The design of an incremental sheet forming machine, Advanced Materials Research, Trans Tech Publications Ltd, Vol. 6, pp. 471-478, (2005).10.4028/www.scientific.net/AMR.6-8.471
- 6. Amino, M., Mizoguchi, M., Terauchi, Y., Maki, T., Current status of “Dieless” Amino’s incremental forming, Procedia Engineering, Vol. 81, pp. 54-62, (2014).10.1016/j.proeng.2014.09.128
- 7. Tera, M, Breaz, R.-E., Racz, S.-G., Gîrjob, C., Processing strategies for single point incremental forming—a CAM approach, International Journal of Advanced Manufacturing Technology, Vol. 102, pp. 1761–1777, https://doi.org/10.1007/s00170-018-03275-9, (2019).10.1007/s00170-018-03275-9
- 8. Breaz, R. E., Racz, S. G., Considerations Regarding the Industrial Implementation of Incremental Forming Process, Materials Science Forum, Trans Tech Publications Ltd., Vol. 957, pp. 111-119, (2019).10.4028/www.scientific.net/MSF.957.111
- 9. Caro, S., Dumas, C., Garnier, S., Furet, B., Workpiece placement optimization for machining operations with a KUKA KR270-2 robot, IEEE International Conference on Robotics and Automation, pp. 2921-2926, (2013).10.1109/ICRA.2013.6630982
- 10. Brunete, A., Gambao, E., Koskinen, J., Heikkilä, T., et. al., Hard material small-batch industrial machining robot, Robotics and Computer-Integrated Manufacturing, Vol. 54, pp. 185-199, (2018).10.1016/j.rcim.2017.11.004
- 11. Jeswiet, J., Micari, F., Hirt, G., Bramley, A., Duflou, J., Allwood, J., Asymmetric single point incremental forming of sheet metal, CIRP Annals, Vol. 54, No. 2, pp. 88–114, (2005).10.1016/S0007-8506(07)60021-3
- 12. Racz, S.G., Breaz, R.E., Bologa, O. Tera, M., Oleksik, V.Ș., Using an adaptive neuro-fuzzy inference system (ANFIS) to calculate the vertical force in single point incremental forming, International Journal of Computers Communications & Control, Vol: 14, Issue: 1, pp. 63-77, DOI: 10.15837/ijccc.2019.1.3489, (2019).10.15837/ijccc.2019.1.3489
- 13. Tera, M., Breaz, R. E., Bologa, O., & Racz, S. G. (2015). Developing a Knowledge Base about the Technological Forces within the Asymmetric Incremental Forming Process, Key Engineering Materials, Vol. 651–653, pp. 1115–1121. https://doi.org/10.4028/www.scientific.net/kem.651-653.1115, (2015).10.4028/www.scientific.net/KEM.651-653.1115
- 14. Chera, I., Bologa, O., Racz, G., Breaz, R., Crenganis, M., FEM researches regarding incremental forming process, Annals of the Oradea University Fascicle of Management and Technological Engineering, Vol. 1, pp. 53–58, (2013).10.15660/AUOFMTE.2013-1.2780
- 15. Kumar, A., Gulati, V., Kumar, P., Investigation of process variables on forming forces in incremental sheet forming, Int J Eng Technol, Vol. 10, pp. 680–684, (2018).10.21817/ijet/2018/v10i3/181003021
- 16. Meier, H., Zhu, J., Buff, B., Laurischkat, R., CAx process chain for two robots based incremental sheet metal forming, Procedia CIRP, Vol. 3, pp. 37-42, (2012).10.1016/j.procir.2012.07.008
- 17. Liu, Z., Li, Y., Meehan, P.A., Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming, Int J Precis Eng Manuf, Vol. 14, No. 11, pp. 1891–1899, (2013).10.1007/s12541-013-0255-z