References
- 1. Iseki, H., Kato, K., & Sakamoto, S. Flexible and incremental sheet metal forming. Proc. 40th JJCTP (japonese version), pp. 41-44, (1989).
- 2. Li, Y., Chen, X., Liu, Z., Sun, J., Li, F., Li, J., Zhao, G., A review on the recent development of incremental sheet-forming process, The International Journal of Advanced Manufacturing Technology, 92, pp. 2439–2462, (2017)10.1007/s00170-017-0251-z
- 3. Ambrogio, G., Sgambitterra, E., De Napolia, L., Gagliardia, F., Fragomenib, G., Piccininnic, A., Gugleilmic, P., Palumboc, G., Sorgented, D., La Barberae, L., Villae, T.M., Performances analysis of Titanium prostheses manufactured by Superplastic Forming andIncremental Forming, 17th International Conference on Sheet Metal, SHEMET17, Procedia Engineering 183, pp. 168 – 173 (2017).10.1016/j.proeng.2017.04.057
- 4. Rebelo, R., Fernandes, M., Fangueiro, R, Biopolymers in Medical Implants: A brief Review, 3rd Intgernational Conference on Natural Fibers: Advanced Materials for a Greener World, Procedia Engineering 200, pp. 236-243, (2017)10.1016/j.proeng.2017.07.034
- 5. Behera, A.K., de Sousa, R.A., Ingarao, G., Oleksik, V., Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015, Journal of Manufacturing Processes 27, pp. 37-62, (2017)10.1016/j.jmapro.2017.03.014
- 6. Bagudanch, I., Lozano-Sanchez, L.M., Puigpinos, L., Sabater, M., Elizalde, L.E., Elias-Zuniga, A., Garcia-Romeu, M.L., Manufacturing of polymeric biocompatible cranial geometry by single point incremental forming, The Manufacturing Engineering Society International Conference, MESIC 2015, Procedia Engineering 132, pp. 267-273, (2015)10.1016/j.proeng.2015.12.494
- 7. Bagudanch, I., Garcia-Romeu, M.L., Ferrer, I., Ciurana, J., Customized cranial implant manufactured by Incremental Sheet Forming using a biocompatible polymer, Rapid Prototyping Journal, Vol. 24 Issue: 1, pp. 120-129, (2018)10.1108/RPJ-06-2016-0089
- 8. Song, T., Qiu, Z.Y., Cui, F.Z., Biomaterials for reconstruction of cranial defects, Frontiers of Material Science, Vol. 9, No. 4, pp. 346-354, (2015)10.1007/s11706-015-0312-x
- 9. Bonda, D.J., Manjila, S., Selman, W.R., Dean, D., The recent revolution in the design and manufacture of cranial implants: modern advancements and future directions, Neurosurgery, Vol. 77, No. 5, pp. 814-824, (2015)10.1227/NEU.0000000000000899
- 10. Afonso, D., de Sousa, R.A., Torcato, R., Integration of design rules and process modelling within SPIF technology – a review on the industrial disemination of single point incremental forming, Int J Adv Manuf Technol, 94, pp. 4387-4399,(2018)10.1007/s00170-017-1130-3
- 11. Piitulainen, J., Reconstruction of cranian bone defects with fiber-reinforced composite-bioactive glass implants, PhD thesis, University of Turku, Finland, (2015)
- 12. Racz, S.G., Breaz, R.E., Tera, M., Girjob, C., Biris, C., Chicea, A.L., Bologa, O., Incremental forming of Titanium Ti6Al4V alloy for cranioplasty plates – Decision-making process and technological approaches, Metals, 8, 626, (2018)10.3390/met8080626
- 13. Sgambitterra, E., Piccininni, A., Guglielmi, P, Ambrogio, G., Fragomeni, G., Villa, T., Plumbo, G., Assessment of the mechanical performance of titanium cranial prostheses manufactures by super plastic forming and single point incremental forming, AIP Conference Proceedings 1960, 160026, (2018)10.1063/1.5035052
- 14. Jardini, A.L., Larosa, M.A., Filho, R.M., Carvalho Zavaglia, C.A., Bernardes, L.F., Lambert, C.S., Calderoni, D.R., Kharmandayan, P., Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing, Journal of Cranial-Maxillofacial Surgery, Vol. 42, No. 8, pp. 1877-1887, (2014)10.1016/j.jcms.2014.07.006
- 15. Centeno, G., Bagudanch, I., Morales-Palma, D., Garcia-Romeu, M.L., Gonzalez-Pereu-Somarriba, B., Martinez-Donaire, A.J., Gonzalez-Perez, L.M., Vallellano, C., Recent approaches for the maufacturing of polymeric cranial prostheses by incremental sheet forming, 17th International Conference on Sheet Metal, SHEMET17, Procedia Engineering 183, pp. 180-187, (2017)10.1016/j.proeng.2017.04.059
- 16. Saidi, B., Moreau, L.G., Mhemed, S., Cherouat, A., Adragna, P.A., Nasri, R., Hot incremental forming of titanium human skull prosthesis by using cartridge heaters: a reverse engineering approach, The International Journal of Advanced Manufacturing Tehcnology, pp. 1-8, (2018)10.1007/s00170-018-2975-9
- 17. Europeean Commission, EN Horizon 2020 Work Programme 2016-2017, Europeean Commission, (2016)
- 18. OLEKSIK, V., PASCU, A., GĂVRUŞ, A., OLEKSIK, M. Experimental studies regarding the single point incremental forming process. Academic Journal of Manufacturing Engineering, Vol. 8, No. 2, p. 51-56, 2010.